Mechanical Components and Assemblies

Mechanical Components and Assemblies

Handwheels are resistant to solvents, oils, and grease.

Jan 11, 2002

Two-Spoked Handwheels are available in 2 versions: either with or without revolving handle, or with locking retractable handle. Locking retractable handle is designed to pivot freely. Elesa® original designed handwheels are made from high-impact strength technopolymer plastic with black matte finish; hubs are molded in, and made of steel with black oxide finish; and cover disk is matte,... Read More

Mechanical Components and Assemblies

Swivel Fittings spin 360 degrees.

Jan 11, 2002

Metal Swivel Fittings are available in brass, nickel-plated brass or stainless steel, providing easy access in tight spots. They come in straight connectors, elbows and tees. Fittings can be provided in 10-32 through 1/2 NPT male or female threads and in 1/16 through 1/2 ID barb. Read More

Mechanical Components and Assemblies

Metric Chain fits conveyor lines globally.

Jan 11, 2002

Metric 7705 MatTop metric chain is available in both molded-to-width (84.0 mm) and assembled-to-width (85.0 mm increments) constructions. Sprocket pockets are on 85.0 mm centers. Both versions have same chain height, share same sprockets, and are identifiable by orange TwistLock plugs. Read More

Computer Hardware & Peripherals, Mechanical Components and Assemblies

3U CompactPCI Chassis has 13 slots and 3 power supplies.

Jan 08, 2002

cPCIS-2103 19 in. rack mountable or table top enclosure is fully PICMG 2.0 compliant, and supports up to 12 application peripheral devices. It features space for system CPU; 3 redundant, hot swappable power supplies; and 1 PCI-to-PCI bridge. In 4U high form factor, cPCIS-2103 is capable of assembling 3U CompactPCI cards in its EMC/EMI resistant chassis. System configuration is also offered with... Read More

Electronic Components & Devices, Mechanical Components and Assemblies

Reversed PC Chassis makes cabling easier.

Jan 07, 2002

Backwards RBC PC chassis puts expansion-card connectors, switch, drive bays and USB port in front for easy access. All-steel heavy duty rack-mount chassis is 19 in. wide at flanges, 4 rack units (7 in.) high, and 17.9 in. deep. It is available in 14-slot passive backplane or ATX motherboard versions. Applications include test lab and industrial control tasks that require convenient front access... Read More

Mechanical Components and Assemblies, Mechanical Power Transmission

Mounted Units are fabricated from stainless steel.

Jan 04, 2002

Stainless Steel Bearing inserts and housings provide load carrying capacity and corrosion resistance. Units feature solid base, which prevents contaminants from collecting in gaps, and silicon seals to discourage bacteria growth. They are suitable for applications in highly corrosive settings. Available shaft sizes include: pillow blocks from 0.75 to 1.5 in., flanges (2 bolt and 4 bolt) from 0.75... Read More

Mechanical Components and Assemblies

Linear Guides are self-aligning to absorb mounting errors.

Jan 02, 2002

Miniature LH Series, designed with 50 deg contact angle, provide large vertical load capacity and good rigidity. Guides are made from stainless steel, and have 4 row offset Gothic arch groove configuration for 2 point contact and high impact resistance. Ball cage for size 10 and 12 provides ball retention when bearings are removed from rail. Maximum rail lengths range from 376 to 800mm. Read More

Mechanical Components and Assemblies, Mechanical Power Transmission

Couplings and Collars are used in wet applications.

Jan 02, 2002

Stainless Steel Collars, Couplings, and Shaft Adapters are resistant to washdowns, detergents, harsh chemicals, solvents, fuels, and salt water. Collars include 1-piece, 2-piece, hinged, and set-screw designs in bore sizes from 1/8 to 6 in. I.D. Rigid couplings are available in 1-, 2- and 3-piece designs. Products are suitable for use as drive system components in water treatment, pollution... Read More

Mechanical Components and Assemblies

Cable Carrier operates at 66 dB.

Jan 02, 2002

E4/101 Energy Chain System® is made of high tensile and compressive engineered polymers. Dampening element reduces noise without hindering speed or performance. Beveled edges on glide surface also dampen travel noise, while smooth side plate design ensures carrier's resistance to contaminants. Applications include high-speed material handling S/R systems, gantry robots, cranes, assembly plant... Read More

Mechanical Components and Assemblies

Linear Guides feature low profile.

Dec 21, 2001

Drylin® N linear guides feature polymer gliding elements that run in anodized aluminum rail, providing oil-free and maintenance-free operation. They are suitable for environments prohibiting use of lubricated guides. Applications include test instruments, packaging machinery, assembly machinery and material-handling devices. Four sizes are available. Read More

Mechanical Components and Assemblies

Pressure Packing keeps compressors cool.

Dec 18, 2001

Thermosleeve packing for reciprocating compressors eliminates need for direct water cooling of packing assembly. It provides direct path for heat conduction from packing assembly to cylinder housing using cup and expanding sleeve. Packing installs in existing cylinders and may be reconditioned. Thermosleeve is also suitable for air cooled compressors. Read More

Mechanical Components and Assemblies

Transition Guides feature snap-in mounting.

Dec 11, 2001

cPCI-T Series(TM) Transition Guides are designed specifically for compact PCI (cPCI(TM)) applications, and are fully compliant to IEEE 1101.10 and PICMG 2.16 CompactPCI® specifications. Manufactured from UL rated 94V-0, ABS material for rigidity and strength, cPCI-T Guides support rear I/O as well as modified architectures. Available in red or white, guides can be ordered with or without... Read More

Mechanical Components and Assemblies

Die Lifters move tools in and out of press.

Dec 11, 2001

Spring loaded and hydraulic die lifters enable easy movement of heavy dies, molds, fixtures, tools and pallets for metal stamping and plastic injection molding. Upon activation, lifters raise die 0.08 to 0.16 in. above bolster, allowing die movement. When pressure is released, die lowers into bolster. Lifters move dies in several directions for proper positioning. They are available in four... Read More

Mechanical Components and Assemblies

Hydraulic Cylinders work for pulling or tensioning.

Dec 11, 2001

Hydraulic pull cylinders come in 2 or 5 ton capacities with 5 in. of stroke. Made of high quality steel, cylinders incorporate threaded piston and base ends for easy attachment of tooling or accessories. They have plated pistons for corrosion resistance, and 3/8 in. NPT ports with quick disconnect couplers. Optional clevis attachment is available for piston or base end of pull cylinders. Read More

Mechanical Components and Assemblies

Rodless Pneumatic Cylinder works in temperatures to 500 ºF.

Dec 11, 2001

OSP Series Thermocylinder can be used for door opening and transfer in extreme temperature applications. It uses heat transfer and thermodynamic principles to allow coolant to pass through entire length of cylinder. As coolant passes through, heat energy is absorbed and barrel behaves similar to water jacket. This keeps heat away from cylinder bore where plastic and rubber parts are used. Read More

Mechanical Components and Assemblies

Aluminum Chassis Cubes perform in rugged environments.

Dec 10, 2001

cPCI-2500 Chassis Series cubes include 10 3U slots and optional 6.4 in. TFT LCD. Cubes come with mounting kit, 32-bit PCI bus connection, two 90 CFM fans, and air filters. They are wall or ceiling-mountable, or can be placed on desktop or rack. Cubes are also mobile, with a modular ac/dc power supply. Applications include industrial automation and control, image processing and multimedia, and... Read More

Material Handling & Storage, Mechanical Components and Assemblies

NFPA Stainless Steel Tie-Rod Cylinders are pre-lubed.

Nov 09, 2001

SS series requires no additional lubrication. Standard 250 psi pneumatic and optional 400 psi non-shock hydraulic cylinders are available with single or double rod end, oversized rods and 1-1/2 to 8 in. bore sizes. Non-rotating SS-NR series has 1-1/2 to 8 in. bores. SS-MSE/MSR versions are available in 2, 3 and 4-stage force multiplying models. Both 125 psi pneumatic and low-pressure hydraulic... Read More

Mechanical Components and Assemblies

Tie-rod Cylinder features a no-pinch point design.

Nov 09, 2001

Micro-Adjust NFPA Tie-Rod Cylinder features calibrated stop collar that allows for precise adjustment of extended stroke. Once adjusted, collar can be locked in place and offers precision scale and 0.001 in. calibration. Standard bore sizes range from 1-1/2 in. to 8 in. with up to 6 in. stroke and adjustment, and various standard NFPA mounts. Read More

Computer Hardware & Peripherals, Mechanical Components and Assemblies

Development Kit complies with PICMG 2.16 specification.

Nov 09, 2001

PICMG® 2.16 Ethernet Packet Switching Development Kit consists of 9-slot tower with 8-slot PICMG 2.16 Ethernet Packet Switching backplane, which has mix of PICMG 2.16 node slots and standard CompactPCI slots. Kit includes provisions for CD ROM drive, hard drive and floppy drive; provisions for 80 mm rear plug-in modules and transition modules; embedded 300 W ATX power supply; and push/pull... Read More

Material Handling & Storage, Mechanical Components and Assemblies

Cylinders are available with bore sizes from 3/4 to 8 in.

Nov 08, 2001

Q6 Hydro-Line Cylinders come with pressure-energized nitrile rod seals and nonmetallic piston wear rings. Pre-lubricated from factory, cylinders are suitable for non-lubricated air service up to 250 psi. Q6 NFPA-interchangeable cylinders feature precision-machined aluminum end caps and self-aligning, externally removable rod cartridge assemblies. Hydraulic HQ6 tolerates pressures to 400 psi, and... Read More