Cabinet Handles are ergonomically designed.
Cabinet U-handles with zinc-plated steel, threaded studs are available in black nylon plastic. They resist heat to 300 deg F.
Read More »
Bumpers come in standard and custom sizes.
Square and Rectangular bumpers are available in black neoprene and polyurethane, in 60 and 80 durometers, with sizes of 3/4 in. square to 2 1/2 x 4 in. Heights range from 3/8 to 2 in. Special cut bumpers are available in black neoprene, 80 durometer, with thickness from 3/8 to 2 in. They can be fabricated with drilled, counter-bored, or tapped holes, with aluminum backing.
Read More »
Cutting Inserts improve efficiency and productivity.
Aluminum Cutting Inserts are available in WCGT 05 and WCGT 06 sizes to mount into existing OTM HOLESHOT(TM) and HOLESHOT(TM)-IS (Integral Shank) drills. Available in grade 12, inserts feature highly polished surfaces and up-sharp geometry for drilling aluminum. Their polished surfaces reduce coefficient of friction for drilling in soft, gummy material.
Read More »
Hydraulic Clamps hold thin-walled workpieces.
Built-in locking pistons in threaded-body push clamps, block cylinders, and edge clamps allow floating clamping of workpieces with minimum deformation. Pistons provide light clamping force, but high support force, ensuring parts do not move when being machined. Plungers in cylinders have thin-walled section that expands under high pressure against inside of housing to lock plunger in place....
Read More »
Top Design Engineering Considerations For Optical Assemblies
In this eBook, we provide an overview of the design engineering considerations to keep in mind when planning the manufacture of an optical assembly.
Read More »
Bellows Covers resist chemicals and UV.
Available in round and rectangular shapes in open-ended or closed form, LFP(TM) Bellows and Way Covers are made with flexible, multilayered PTFE material. Heat-sealed covers have no stitching, maintain zero-porosity even after severe flexing, resist chemical attack and ultraviolet exposure, and are rated for 500Ã-
Read More »
Stainless Steel Clamp adjusts over wide range.
Clamp provides large diametrical adjustment range, similar to worm gear clamps, but has higher strength of T-bolt clamp. This allows one product to be used in several different applications. It can be fastened using simple torque wrench. Clamp comes standard with 3/4 in. wide band and is available in both tempered and annealed stainless steel.
Read More »
Flange Gaskets seal under low pressures.
TriGuard(TM) gaskets provide positive sealing in fluid piping on fragile flanges or flanges with irregularities, where bolt torque and gasket compression stress must be limited. Expanded PTFE material combines sealing characteristics of elastomers with temperature and chemical resistance of PTFE. Gas-tight sealing can be achieved at 250 psi. They are available in 1/2 to 28 in. ANSI ring and full...
Read More »
Linear-Rail Bellows are thermally sealed.
Thermally Sealed Linear Rail Bellows offer liquid and dust proof materials and profiled PVC stiffeners in every fold. They install with snap on fit and Velcro fasteners. Thermally Sealed & Stitched Bellows offer seamless design for both liquid and particle protection. PVC frame is permanently attached into each fold. Stitched Style Bellow comes in round and rectangular form. Armadillo Bellows are...
Read More »
Miniature Ball Screw includes spring-preloaded double nut.
Series 1510 compensates for torque variations due to inaccuracies in ground thread. Diameters range from 3 to 16 mm with pitch down to 0.5 mm. Standard nut body is cylindrical with attaching thread. Applications include semiconductor production machines, inspection equipment, microscope stages, and miniature robotics. Series 1530 offers rolled thread for less demanding positioning applications....
Read More »
Test Assemblies range from DC to 65 GHz.
PHASEFLEXÃ-® Assemblies are crush-, torque-, kink-, and fluid-resistant. They are also dust- and dirt-proof with ergonomic/ruggedized boot strain reliefs. Standard connectors include SMA, TNC/PTNC, Type N/Precision N, 7 mm, 7-16, 3.5 mm, 2.92 mm (K style), 2.4 mm, 1.85 mm (V style). Assemblies are suitable for production testing, antenna range testing, thermal vacuum chambers, and remote...
Read More »
Delivery Equipment That Really Delivers
Are you in need of safer, more efficient transportation equipment? Do you feel like your delivery equipment could really use an upgrade? Check out this video, and learn about Halo Ramp Company's patented safety platforms, and how they help you bypass your trickiest delivery challenges.
Read More »
