Mechanical Components and Assemblies

Bridgeport’s Zinc Alloy Fittings Listed for Use with Aluminum EMT Means Contractors Can Install an EMT System that Won’t Rust
Couplers and Couplings

Bridgeport’s Zinc Alloy Fittings Listed for Use with Aluminum EMT Means Contractors Can Install an EMT System that Won’t Rust

STRATFORD, Conn. (April 19, 2017) – Electricians have often asked, “Why doesn’t an EMT manufacturer make corrosion-resistant tubing that won’t rust.” Now with aluminum EMT, contractors have their wish and can put away their rigid conduit threaders and reamers. Aluminum EMT is the perfect material choice for indoor or outdoor, damp, wet or exposed environments. With Bridgeport’s line...

Read More »
Fault Transmitter and Receiver Systems offer protection to distribution systems.
Transmitters

Fault Transmitter and Receiver Systems offer protection to distribution systems.

Available in SEL-FT50 transmitter and SEL-FR12 receiver models, Fault Transmitter and Receiver Systems eliminate unnecessary coordination delays. SEL-FT50 transmitter is installed on laterals, branches and main lines for broadcasting fault statuses via 860 or 900 MHz radio to receiver system. System consists of 12 line-powered SEL‑FT50 transmitters and 1 SEL-FR12 receiver that communicate fault...

Read More »
Fault Transmitter and Receiver Systems offer protection to distribution systems.
Transmitters

Fault Transmitter and Receiver Systems offer protection to distribution systems.

Available in SEL-FT50 transmitter and SEL-FR12 receiver models, Fault Transmitter and Receiver Systems eliminate unnecessary coordination delays. SEL-FT50 transmitter is installed on laterals, branches and main lines for broadcasting fault statuses via 860 or 900 MHz radio to receiver system. System consists of 12 line-powered SEL‑FT50 transmitters and 1 SEL-FR12 receiver that communicate fault...

Read More »
Edge Protection Seal Profiles meet RoHS standards.
Seals

Edge Protection Seal Profiles meet RoHS standards.

Edge Protection Seal Profiles are available in GN 2180 and GN 2182 versions. Made from EPDM rubber or black acrylonitrile butadiene rubber in black for sizes 20.5 mm and 13 mm, GN 2180 version provides 25 ±5 Shore A sealing profile hardness and clamping profile hardness of 65 ±5 Shore A for EPDM rubber and 60 ±5 Shore A for NBR. Resistant to -40 to 90°C temperature range, version 2182 is made...

Read More »
Edge Protection Seal Profiles meet RoHS standards.
Seals

Edge Protection Seal Profiles meet RoHS standards.

Edge Protection Seal Profiles are available in GN 2180 and GN 2182 versions. Made from EPDM rubber or black acrylonitrile butadiene rubber in black for sizes 20.5 mm and 13 mm, GN 2180 version provides 25 ±5 Shore A sealing profile hardness and clamping profile hardness of 65 ±5 Shore A for EPDM rubber and 60 ±5 Shore A for NBR. Resistant to -40 to 90°C temperature range, version 2182 is made...

Read More »
MIXO Modular Inserts are resistant to mechanical stresses.
Inserts

MIXO Modular Inserts are resistant to mechanical stresses.

Available with types of connections ranging from small signal connectors with low amp and voltage, up to 200 amp connectors, MIXO Modular Inserts are mounted side by side and locked into metallic frame. Each insert is designed to fit and lock into frame sizes ranging from 1 module to 12 modules. Housing signal, power, data and pneumatics contacts for conduction with up to 8 bars pressure...

Read More »
MIXO Modular Inserts are resistant to mechanical stresses.
Inserts

MIXO Modular Inserts are resistant to mechanical stresses.

Available with types of connections ranging from small signal connectors with low amp and voltage, up to 200 amp connectors, MIXO Modular Inserts are mounted side by side and locked into metallic frame. Each insert is designed to fit and lock into frame sizes ranging from 1 module to 12 modules. Housing signal, power, data and pneumatics contacts for conduction with up to 8 bars pressure...

Read More »
MS3 Inserts come with HiPIMS PVD coating.
Inserts

MS3 Inserts come with HiPIMS PVD coating.

Suitable for machining unstable or thin-walled components and setups, MS3 Inserts are equipped with coolant jet guiding geometry. Featuring smooth surface and extremely sharp cutting edges, MS3 inserts are used for cutting high temperature alloys, titanium, cobalt-based and nickel-based alloys. Units are combined with WSM01 grade and secondary applications include steel, stainless steel and...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics