Materials

Channel features built-in tape measure.
Channels

Channel features built-in tape measure.

BK Channel is equipped with tick marks located on 1 1/2 in. centers along length, serving as built-in tape measure for fast and accurate field cuts. Longer tick mark is featured every 6 in. Pre-punched 9/16 in. holes are provided on 1 1/2 in. centers along length of channel, and can accommodate up to 1/2 in. hardware and all threaded rod. Finished in durable yellow zinc dichromate, BK Channel is...

Read More »
Protective Packaging suits long-duration shipments.
Foams

Protective Packaging suits long-duration shipments.

Microfoam® ORCA(TM) Wrap and Astro-Foam® ORCA(TM) Wrap feature protective sheet foam laminations with ventilation holes. Wraps reduce damaged goods, resist scratching, and offer breathability, which minimizes condensation and keeps moisture away from product. Microfoam® Wrap features 1/10th in., polypropylene foam laminated to .8 mil polyethylene film. Astro-Foam® Wrap is...

Read More »
Mold Bases are offered in 75+ trillion configurations.
Bases

Mold Bases are offered in 75+ trillion configurations.

SelectBase(TM) units are offered in 43 nominal mold base sizes (from 0808 to 2435) with 4 steel types and 9 plate thicknesses. Features include available clamp slot type (A, B, C, or D), location or omission of locating ring, and sprue bushing and sprue puller pin. Options include selection or omission of assembly screws, choice of stop pins and return pins, and either 3-piece or welded ejector...

Read More »
PCMCIA Device provides high-speed operation.
Cards

PCMCIA Device provides high-speed operation.

DAQCard-6036E data acquisition (DAQ) device offers 16-bit analog input on 16 single-ended or 8 differential channels, two 16-bit analog output channels, 8 digital I/O lines, and two 24-bit counter/timers. It digitizes input voltages at rates up to 200 kSamples/s. Using programmable function inputs (PFI), engineers can synchronize device with multiple data acquisition and control devices. Unit...

Read More »
Polymer Alternative suits hose applications.
Rubber

Polymer Alternative suits hose applications.

G&E Blended 565 EPDM is suited for high-performance products and continuous cure extrusion applications. Ethylene and ENB are measured and controlled through entire manufacturing process for repeatable processing characteristics. G&E Blended 565 EPDM can be colored to allow for more product applications. Supplied as free-flowing pellets in 33 lb bags, applications include tube and cover stock,...

Read More »
Thermal Interface Materials

Thermal Interface Pads offer low thermal resistance.

SARCON® SF-Nd Phase Change Thermal Interface Pads have thermal conductivity of 2.0 W/m-K and thermal resistance of only 0.015°C inchÂ-²/W, at 85 psi. When junction temperature reaches 60°C, phase change material changes from solid state and begins to flow, filling all micro-pores of component and heat sink. Wetting action removes all pockets of air, providing best possible...

Read More »
Conductive Silicones provide EMI/RFI shielding.
Silicone

Conductive Silicones provide EMI/RFI shielding.

BISCO® EC-2000 Series Conductive Silicones are nickel-graphite filled materials offering compression-set, flame and corrosion resistance. They come in wide continuous roll goods in thicknesses from 0.020 to 0.125 in., making them suitable for replacing fabric-over-foam in intricately shaped applications. EC-2000 products fall in 30-40 Shore A durometer range and are suitable for base...

Read More »
Interface Cards support Windows® XP.
Cards

Interface Cards support Windows® XP.

Applications running under Windows® XP can be connected to Data Highway Plus, DeviceNet, or Profibus using SST Interface Cards. Computer bus formats supported include PCI, ISA, PC/104, PCMCIA, and Compact PCI (varies by network). Cards provide connectivity solution for various applications including PC Control, HMI, SCADA, Operator Interface, and diagnostics. They also support applications...

Read More »
Additives

Additives enhance polymers and elastomers.

Surface Modified Silicon Carbide Polymer Matrix Composite (SPMC) additives reduce friction and abrasion weight loss when added to polymers and elastomers without adversely affecting physical properties of host material. SPMC-PA acts as material flow enhancer for plastics extrusion. SPMC-C/CF reduces abrasion weight loss in coatings and linings. SPMC-BT is engineered for reciprocating and rotating...

Read More »
Solder Paste features colored labeling for identification.
Solder

Solder Paste features colored labeling for identification.

SolderPlus® dispensable solder paste formulations are packaged in 3, 5, 10, 30, and 55 cc syringes with green end caps and green leaf label design for immediate recognition on production floor. Tin/silver, tin/silver/copper, and tin/bismuth alloys have low liquidus temperatures from 217 to 138° C, and provide precise, consistent solder deposits when applied with air-powered dispensing...

Read More »
Delivery Equipment That Really Delivers
Sponsored

Delivery Equipment That Really Delivers

Are you in need of safer, more efficient transportation equipment? Do you feel like your delivery equipment could really use an upgrade? Check out this video, and learn about Halo Ramp Company's patented safety platforms, and how they help you bypass your trickiest delivery challenges.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers