Materials

Fluorescent Lampholder is dedicated to fit T-8 lamps only.
Bases

Fluorescent Lampholder is dedicated to fit T-8 lamps only.

Available in two versions, Cat. No. 13652 non-shunted and 23652 shunted for electronic ballasts, lampholder is suitable for indoor lighting applications. It has front push-in wiring ports for easy access, snap-in or slide-on mounting options, and 4-position positive-stop lamp-lock, which makes it simple for end-users to re-lamp in service. Rated 660W-600V, it is UL-Listed, CSA- and NOM-certified.

Read More »
Castable Alumina can be made into furnace parts.
Alumina (Aluminum Oxide)

Castable Alumina can be made into furnace parts.

Ziralcast 95 is made primarily of pure fused alumina bubbles that can be cast into structural components for furnaces such as flue liner/stack, door vestibules, and furnace crowns. Other furnace furniture that may be cast includes crucible holder in glass melting research or covers for metal melting and transport systems. After initial set time of 1-4 hr, and final set time of 7-10 hr, it reaches...

Read More »
Computers

Controller Board suits PC/104-based microcomputer systems.

PCMCIA Dual Interface board adds PC card I/O functionality to PC/104 system. Featuring Intel(R) PD6722 chip, module is fully PC/104 form-factor compliant, and available with either 2 front-, right- or left-loading PCMCIA disk drives. It supports all Type I, II, and III PCMCIA memory; I/O; and ATA hard disk cards, which can support transfer of data and sharing of peripheral devices between...

Read More »
Sheets

Sheet Monitor feeds one sheet at a time.

Model DB 12 ultrasonic transmitter, matching receiver, and evaluation unit detect when printing and paper processing machines pull in more than 1 sheet of paper, carton, or plastic. Transmitter and receiver come with M18-housing, and are 25 mm long, making them suitable for mounting even when space is limited.

Read More »
Damping Material stops noise and vibration in equipment.
Mounts

Damping Material stops noise and vibration in equipment.

ISODAMP® C-1000 Series thermoplastics, highly damped vinyl materials provide vibration isolation, shock protection and noise control. Three formulations are available as standard and custom-molded isolators. Materials exhibit extremely low amplification at resonance and quick return to system equilibrium after shock or vibration input. ISODAMP C-1002 performs in range from 13 to 41 deg C;...

Read More »
Silicone

Silicone Compound comes in syringe applicator.

Non-flammable, non-corrosive Silicone Compound is made of zinc filled polysiloxane. It enables low-loss thermal pathway for heat transfer between semiconductors and heat sinks by displacing air gaps between mating surfaces. Compound forms non-curing seal and maintains flexibile consistency within temperature range of -40 F to 500 deg F. It provides dielectric strength of 250-350 volts/mil and...

Read More »
Suspended Magnet separates metal from streams.
Magnets

Suspended Magnet separates metal from streams.

Low Profile Magnetic Separator uses powerful permanent suspended magnet to remove metal from aggregate, C and D debris and crusher feed streams. It has easy access suspension system, low profile pulleys and direct drive. System provides efficient magnetic separation in small space.

Read More »
Foams

Specialty Foams provide gasketing and sealing.

PORON(R) Urethane foams are low outgassing and demonstrate resistance to compression set. They are available in thin and soft materials cast on PET film, ideal for cushions and seals in small portable electronic devices. V-0 and HF-1 rated, BISCO(TM) Silicone foams retain integrity after long periods under compression and can withstand temperature to 400 deg F. Polyolefin foams are silane,...

Read More »
Molybdenum Wire resists oxidation and corrosion.
Molybdenum

Molybdenum Wire resists oxidation and corrosion.

Metallurgically bonded platinum- or nickel-clad molybdenum wire provides low coefficient of thermal expansion at temperatures up to 1,200°C. Platinum clad wire is available from 0.010 to 0.060 in. OD with claddings ranging from 14-38% by weight and from 4.5 to 55 microns, depending upon dia. For less corrosive environments, nickel-clad molybdenum wire is available. Spools, coils, and...

Read More »
Magnetic Blocks have pull forces of 50 to 200 lbs.
Magnets

Magnetic Blocks have pull forces of 50 to 200 lbs.

Available in 3 sizes, Strong Hand Modular Magnetic Blocks are rare earth neodymium magnets designed for use in fixturing, lifting and holding steel parts, and safely cleaning up iron and steel chips. Equipped with ON/OFF switch, magnetism can be turned off during set-up and turned on whenever user is ready. Magnetic blocks have 8 threaded holes on adjacent surfaces for mounting plate.

Read More »
Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions
Sponsored

Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions

Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.

Read More »

All Topics