Materials

Foams

Crosslinked, Polyolefin Foams suit gasketing applications.

Tough enough to suit low profile mounting applications, Volara HPT foams can also replace screws, rivets, and pumpable (caulk) adhesives in various assembly applications. Roll lengths of 4,500 ft can be produced without gauge banding, resulting in fewer roll changes for converters. HPT foams range in thickness from 0.012 to 0.075 in., and densities range from 8 to 20 lbs/ftÂ-³. Standard...

Read More »
Safe Seal Materials protect drinking water systems.
Gaskets

Safe Seal Materials protect drinking water systems.

Sealing materials meet NSF Standard 61 protecting potable water from contaminants that leach or migrate into water from traditional components. Organic materials include 10 EPDM compounds, 7 thermoplastic elastomers, and 2 nitrile compounds that can be formed into faucet and shower gaskets, water filter gaskets, valve seals and seats, pipe coupling seals, and diaphragms and O-rings used in pumps,...

Read More »
Miscellaneous Compounds

Custom Compounds produce speckled parts.

Speckled Dyneon(TM) Custom PTFE Compounds are produced by mixing PTFE with inorganic or organic fillers, which improve wear and abrasion resistance, reduce deformation under load, and add color. Compounds are offered in free-flow and pre-sintered grades. Speckled parts feature temperature resistance up to 500°F.

Read More »
Machine-Leveling Shim adjusts in tiny increments.
Shims

Machine-Leveling Shim adjusts in tiny increments.

Adjustable MicroShim for machine leveling, positioning, and mounting, provides height increments of 0.001 in. over range of 1.0 in. Pair of overlapping wedge plates, with machined surfaces, permit plates to slide parallel to one another. Stainless steel bolt and bar-nut assembly allows user to adjust relative position of plates and set desired height. Shims can be permanently locked into place...

Read More »
Solder Paste joins hard-to-solder materials.
Solder

Solder Paste joins hard-to-solder materials.

SolderPlus with WS421 flux offers aggressive flux chemistry that provides suitable bonding strength for mechanical assembly applications. Available in lead-free and tin/lead solder paste alloys, it is prepackaged in EFD syringes for precise application with automatic dispensing equipment. Solder paste works successfully on hard-to-solder materials such as stainless steel 304 and 316, Nichrome,...

Read More »
Polyurethane

Polyurethane Fill provides flat proofing.

RePneu® flatproofing polyurethane fill provides heat resistance, medium tire deflection, improved tear strength and compression set, and softness of 28 durometer. It is suitable for heavy construction and earth moving equipment. Applications include construction, mining, material handling, ground support, roofing, and lawn and garden industries.

Read More »
Power Transformer Core has circular cross section.
Cores

Power Transformer Core has circular cross section.

O-Core uses silicon steel strip, gradually pointed towards end. Transformers wound on O-cores are 15% smaller in size and weight than toroidal transformers. Available with power ratings from 20 to 1200 VA, 50-60 Hz operation, O-cores use grain-oriented silicon steel. With fully rounded edges, transformer does not require epoxy fluidizing or injection molded core jackets, and can be insulated by...

Read More »
Micro-Porous Materials suit material handling applications.
Composites

Micro-Porous Materials suit material handling applications.

METAPOR materials are based on formulation of metal or ceramic powders and epoxy binders. They are highly machinable and produced in plate form in range of standard sizes. METAPOR BF 100 AL is aluminum based and offers temperature resistance up to 230°F. METAPOR BF 210 AL is aluminum based and can be used in temperatures up to 460°F. METAPOR MC 100 AL is aluminum based and highly...

Read More »
Tungsten Carbide Wires withstand earth moving applications.
Tungsten

Tungsten Carbide Wires withstand earth moving applications.

Stoody® 130 semi-automatic open arc wire resists metal to earth wear and works on carbon or low alloy steel. This makes it suitable for welding scoop lids and teeth, pug mill knives, cultivator chisels, Raymond mill plows, and tillage tools. Wire is available in 0.062 in. dia with ranges of 90-120 A and 18-24 V, and wire extension of 1/4 in., and in 7/64 in. dia with ranges of 120-150 A and...

Read More »
High Pressure Laminates come in 19 patterns and woodgrains.
Laminates

High Pressure Laminates come in 19 patterns and woodgrains.

Rebel-utionary Laminates are offered in 4 bamboo colorations including green, red, yellow, and blue. Chiasma pattern woodgrain is cross-shaped configuration offered in Earthlight (shimmering copper), Radiant (gold with greencast overtone), and Camouflage (yellow-orange and blue-green undertones). Metaphor laminates mix concrete and metal visual elements. Products are used in commercial and...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics