Materials

Injection Molding Compounds resist impacts, chemicals, and fires.
Miscellaneous Compounds

Injection Molding Compounds resist impacts, chemicals, and fires.

Fire rated Kydex(R) compounds include 10 injection molding and 20 extrusion grades carrying fire ratings of UL Std 94 V-0/5V, FAR 25.853 (a) and (d), ASTM E-162, ASTM E-84, UL 723, UL 2043, UL 756C and/or Class 1/A. Also available are UL 705-rated grades meeting above-the-ceiling air plenum smoke release requirements. Compounds have impact resistance to 18 ft-lb/in., tensile strength to 6500 psi,...

Read More »
Holding Assemblies are offered in hundreds of shapes and sizes.
Magnets

Holding Assemblies are offered in hundreds of shapes and sizes.

Permanent Magnetic Holding Assemblies are designed for positioning, stabilizing, holding, and feeding materials, parts, and scrap. Standard configurations and sizes include Ceramic, Alnico, and Rare Earth magnets. Watertight and high-temperature units are available. Assemblies are used in metal product manufacturing, including workholding and spot-welding.

Read More »
Crystals

VCXOs and Clocks work with 10 Gigabit Ethernet and SONET.

PECL voltage controlled crystal oscillators and reference clocks support applications for WAN and LAN environments. Model 352 VCXO and Model 652 reference clock have choice of two switched outputs and can combine frequencies from 150 to 1,000 MHz. Model 352 VCXO maintains frequency stability of +/-20 ppm while Model 652 clock maintains stability at +/-30 ppm. Both operate in temperatures of -40...

Read More »
Silicone Rubber suits health and safety applications.
Rubber

Silicone Rubber suits health and safety applications.

TUFSIL(R), offered in range of hardness from 30 to 80 durometer (Shore A), can be blended to provide intermediate hardnesses. Rubber cures with addition of platinum based catalyst. Applications include components of respiratory masks, tubing, and other parts that come in contact with skin, or used in health care and food processing industries. Product meets strict ISO and United States...

Read More »
Cable Block is self-adjusting.
Blocks

Cable Block is self-adjusting.

Multi-angle, aerial cable block reduces friction when pulling cable around tight corners by adjusting itself from maximum 12 in. bending radius down to straight line. Pole-mounted corner block can be used in stringing applications that place cables up to 5 in. in diameter, such as 3 bundled 750 MCM cables. All-aluminum, heavy-duty block attaches to pole with inclusive steel chain binder.

Read More »
Common Mode Filters are suitable for power applications.
Inductors

Common Mode Filters are suitable for power applications.

CSF Series have ungapped H ferrite cores with split-section bobbins that have been tightly wound to ensure constant leakage inductance. Dielectric withstanding voltage is 1.5 kV and temperature rise at maximum current is 45 deg C. Filters are available with with vertical or horizontal core mounting, inductance values of 1 to 120 mH, and in industry standard footprints.

Read More »
Fish Tape has non-curling design for easy wire pulling.
Miscellaneous Tapes

Fish Tape has non-curling design for easy wire pulling.

Thumb Winder(TM) features 50 ft of Blued Steel fish tape for rust resistance. Tape is stored and protected in corrosion-resistant ABS case, which will not dent or break due to accidental drops. Its reel design with thumb knob allows users to wind reel in either direction when feeding or retracting. It also prevents tape from kinking or scrambling.

Read More »
Die Shims adjust die button height.
Shims

Die Shims adjust die button height.

Die Button Shims allow users of sharpened die buttons to compensate for removal of metal on cutting surface, and quickly and easily adjust height of die buttons. Shims are offered in 0.005 and 0.015 in. thicknesses for button sizes of 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4, 7/8, and 1 in. Made of hardened steel, they maintain precision thickness under heavy pressure. Shims are sold in 50 piece...

Read More »
Inverter Welding System suits MIG and flux-cored welding.
Welders

Inverter Welding System suits MIG and flux-cored welding.

Power Wave(TM) 355/Power Feed(TM) 10 Welding System is comprised of digitally-controlled inverter power source and industrial wire feeder. It provides control of welding parameters and allows user to select welding output waveform using Mode Selector Switch. Inverter offers 350A at 60% duty cycle. Power Feed 10 features 4-driven rolls in heavy duty drive system for feeding every wire type. Guide...

Read More »
Fish Tape works in difficult conduit runs.
Miscellaneous Tapes

Fish Tape works in difficult conduit runs.

Zoom(TM) has braided stainless steel core and translucent polyamide resin case that allows operator to see how much tape is in case without having to pay out full tape. It is optimized for use in conduit runs with difficult cable placement characteristics, such as multiple bends, elbows, and junction boxes. Omni-directional pushing lets it handle bends and changes in plane without hanging up or...

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics