Material Processing

Retrofit of Controls at Ulbrich on Steel Rolling Mill Increases Power Factor from 0.2 to 1.0
Motor Controllers and Drives

Retrofit of Controls at Ulbrich on Steel Rolling Mill Increases Power Factor from 0.2 to 1.0

Advanced motors and drives replace old equipment, with estimated total cost of upgrade being recouped in less than two years of energy savings alone, thanks to regenerative drive technology from Siemens- Â Â  Most coil steel companies spend considerable time repairing and replacing their line equipment, owing to all the factors one would expect in the heavy-duty world of coil processing. ...

Read More »
Retrofit of Controls at Ulbrich on Steel Rolling Mill Increases Power Factor from 0.2 to 1.0
Motor Controllers and Drives

Retrofit of Controls at Ulbrich on Steel Rolling Mill Increases Power Factor from 0.2 to 1.0

Advanced motors and drives replace old equipment, with estimated total cost of upgrade being recouped in less than two years of energy savings alone, thanks to regenerative drive technology from SiemensÂ- Ã‚ Â  Most coil steel companies spend considerable time repairing and replacing their line equipment, owing to all the factors one would expect in the heavy-duty world of coil...

Read More »
Mixer Parts

FRIMO to Showcase Mix and Metering Technology at UTECH North America

WIXOM, Mich. - FRIMO, a leading developer of high quality plastic components, will be showcasing its latest mix and metering technology at booth #540 during the upcoming UTECH North America polyurethane show, held from April 6-7 in Charlotte, North Carolina. Visitors to UTECH will have the opportunity to see the latest products on the market, source new suppliers, and learn about key issues and...

Read More »
Mixer Parts

FRIMO to Showcase Mix and Metering Technology at UTECH North America

WIXOM, Mich. - FRIMO, a leading developer of high quality plastic components, will be showcasing its latest mix and metering technology at booth #540 during the upcoming UTECH North America polyurethane show, held from April 6-7 in Charlotte, North Carolina. Visitors to UTECH will have the opportunity to see the latest products on the market, source new suppliers, and learn about key issues and...

Read More »
Slitters

Round Knife Cutters handle technical textiles and composites.

Equipped with 350 W motor, Monster Slitter TASW12M is suitable for cutting composite materials such as glass fiber, carbon fiber, Aramid, or any soft material up to 2 in. thick. Model TADD120DT, equipped with 3-phase induction motor, uses 8-sided 120 mm knife to cut thicknesses up to 2 in. Direct-drive, bi-directional- unit can reach speeds of 2,600 rpm. Both models have push button sharpening...

Read More »
Slitters

Round Knife Cutters handle technical textiles and composites.

Equipped with 350 W motor, Monster Slitter TASW12M is suitable for cutting composite materials such as glass fiber, carbon fiber, Aramid, or any soft material up to 2 in. thick. Model TADD120DT, equipped with 3-phase induction motor, uses 8-sided 120 mm knife to cut thicknesses up to 2 in. Direct-drive, bi-directionalÂ- unit can reach speeds of 2,600 rpm. Both models have push button...

Read More »
Undersurface Trimming Unit machines both sides of panel.
Trimmers

Undersurface Trimming Unit machines both sides of panel.

To help streamline production process, Undersurface Trimming Unit allows machining on both sides of panel without flipping. Unit is designed with head that allows user to reach in up to 6 in. from all edges of elevated workpiece for undersurface machining. Flush-mounted ER25 nut and collet system also accommodates use of drill or router bits during production.

Read More »
Undersurface Trimming Unit machines both sides of panel.
Trimmers

Undersurface Trimming Unit machines both sides of panel.

To help streamline production process, Undersurface Trimming Unit allows machining on both sides of panel without flipping. Unit is designed with head that allows user to reach in up to 6 in. from all edges of elevated workpiece for undersurface machining. Flush-mounted ER25 nut and collet system also accommodates use of drill or router bits during production.

Read More »
Carbide Cutter Sets offer various sizes to aid trade technicians.
Mills

Carbide Cutter Sets offer various sizes to aid trade technicians.

Used to cut holes in stainless steel and other materials- up to 3/16 in. thick, 628 and 648 Carbide Cutter sets each come with 6 cutter sizes from 7/8–2 ½ in. Split-point, cobalt-steel pilot drill eliminates walking and fosters accelerated penetration, while tungsten-carbide teeth accelerate cutting of round, burr-free holes. While 628 Carbide Cutter set has built-in arbor on each...

Read More »
Carbide Cutter Sets offer various sizes to aid trade technicians.
Mills

Carbide Cutter Sets offer various sizes to aid trade technicians.

Used to cut holes in stainless steel and other materialsÂ- up to 3/16 in. thick, 628 and 648 Carbide Cutter sets each come with 6 cutter sizes from 7/8–2 ½ in. Split-point, cobalt-steel pilot drill eliminates walking and fosters accelerated penetration, while tungsten-carbide teeth accelerate cutting of round, burr-free holes. While 628 Carbide Cutter set has built-in arbor on...

Read More »

All Topics