Materials & Material Processing

Materials & Material Processing

Group 7 Fungicide controls lettuce (Sclerotinia) drop.

Oct 17, 2016

Providing in-season disease protection while also minimizing SDHI resistance potential, KENJA® 400SC fourth generation SDHI fungicide controls Sclerotinia drop (Sclerotinia sclerotiorum and Sclerotinia minor) in either direct seeded or transplanted lettuce. Product incorporates SDHI technology and can mesh with current disease management programs. It is also registered for strawberries,... Read More

Materials & Material Processing

Narrow Web Corona Treatment System offers speeds to 450 m/min.

Oct 17, 2016

To meet higher-speed imaging needs of digital and offset processes, VELOCITY™ Series incorporates high-density electrode discharge technology and offers production processing speeds in excess of 450 m/min. Models offer treatment widths from 180–915 mm and feature 2 stainless steel idler rollers, zero-speed safety interlock, and solid state generator with integrated transformer. Standard... Read More

Materials & Material Processing

Qutoplex(TM) High Performance Plastic From Minnesota Rubber & Plastics Has Conformability And Dimensional Stability-Ideal For Metal Conversions

Oct 14, 2016

Minneapolis, Minnesota: Minnesota Rubber and Plastics specializes in metal to plastic component conversions using Qutoplex™ a proprietary high performance plastics (HPP).  Proven to lower costs, reduce weight, increase corrosion resistance and perform better in many applications, Qutoplex™ is a new option for component designers. Qutoplex™ is another “first” in the advances in HPP... Read More

Materials & Material Processing

OKW's IP 65 silicone Sealing Kits feature anti-tamper Torx T10 screws.

Oct 14, 2016

Fabricated with pre-molded contours, the IP 65 silicone sealing kits for NET-BOX wall mount enclosures boasts of a smart three-part construction which conceals screws on the front. Applied in management, data systems engineering, supervision terminals with access control, medical and wellness technology. IP 65 is available in 5.51” x 5.51” x 1.83” to 8.66” x 8.66” x 1.99” sizes.... Read More

Materials & Material Processing, Software, Thermal & Heating Equipment

Ipsen Meets Diverse Industry Demands, Shipping 10 Heat-Treating Systems

Oct 14, 2016

CHERRY VALLEY, IL – Customers continue to rely on Ipsen equipment for high performance and quality results. Ipsen recently shipped ten heat-treating systems to customers in India, Vietnam and several U.S. states. This equipment will be used to process parts for the Aerospace, Commercial Heat Treating, Defense, Metal Injection Molding and Tooling industries. Among the shipments were a 6-bar... Read More

Materials & Material Processing

Chemours Inaugurates New Altamira TiO2 Production Line in Mexico

Oct 14, 2016

WILMINGTON, Del. -- The Chemours Company (Chemours) (NYSE: CC), a global chemistry company with leading market positions in titanium technologies, fluoroproducts and chemical solutions, today formally inaugurated its new titanium dioxide (TiO2) production line at its Altamira plant in the Mexican state of Tamaulipas. In May of this year, Chemours announced the commercial start-up of the new line... Read More

Materials & Material Processing, Services, Test & Measuring Instruments

Husky to Demonstrate Range of Innovative PET Preform Molding Solutions at K 2016, Highlighting Revolutionary Multi - Layer Barrier Technology

Oct 14, 2016

BOLTON, Ontario – Husky Injection Molding Systems, a leading industrial technology provider to the plastics processing community, today announced that at K 2016 (Booth A61 in Hall 13) they will showcase their vast range of PET preform molding solutions, including a dedicated Experience Center highlighting their revolutionary Multi-Layer Barrier Technology. Introduced in 2015, the technology... Read More

Materials & Material Processing

Manufacturers Use Innovative Celanese Polymers to Keep Fluids, Materials and Power Moving

Oct 14, 2016

At K 2016 Celanese showcases the tribology plastics energy, fluid handling and industrial sectors use to replace metal DALLAS and DÃœSSELDORF, Germany – Industrial manufacturers depend on a multitude of moving parts to keep the operations of machinery, products, fluids and power in motion. At K 2016, the world’s largest plastics tradeshow, Celanese Corporation (NYSE: CE), a global... Read More

Materials & Material Processing

Injection Molding System offers increased connectivity.

Oct 14, 2016

Featuring hydromechanical clamp design, Reflex platens, and wide tiebar spacing, Hylectric® 4.0 excels at evenly distributing clamping forces, extending tooling life. System is Shotscope™ enabled, allowing for plant connectivity to help control production processes and maximize productivity. With range of clamp and injection module configurations, Hylectric® 4.0 is suited for variety of... Read More

Materials & Material Processing, Mechanical Components and Assemblies

Toray to Exhibit at CAMX 2016 and Showcase its Advanced Carbon Fiber and Engineered Products

Oct 14, 2016

TACOMA, Wash., Sept. 19, 2016 - Toray Carbon Fibers America, Inc. and Toray Composites (America), Inc. will be exhibiting at CAMX in Anaheim, California September 27-29 in booth T84 to promote their latest innovations in Carbon Fiber and Composite Material. Toray's TORAYCA® brand carbon fibers are globally recognized for their outstanding performance, quality and processing consistency,... Read More

Materials & Material Processing

Innovative Airplane Mobile Drink Dispenser Uses Victrex(TM) Peek Polymer for Demanding Inner Water Tank

Oct 13, 2016

WEST CONSHOHOCKEN, PA USA - (October 10, 2016) - Would you like an orange juice, a chilled cola or a hot cup of coffee? For most passengers, drinks at altitudes of 33,000 feet (10,000 meters) are part of the ‘flying experience’. However, the customary service is a cost and an environmental factor for airlines and caterers. “SkyTender”, a mobile drinks dispenser produced by SkyTender... Read More

Materials & Material Processing

Linde to Highlight Liquid CO2 Solutions at Ontario Craft Brewers Conference

Oct 13, 2016

MISSISSAUGA, Ontario, Oct. 7, 2016 -- Linde Canada Limited beverage gas experts will demonstrate the benefits of Linde SURESERVE™ and MAPAX® (food grade) gases and services at the Ontario Craft Brewers Conference Suppliers Marketplace to be held at the Allstream Centre in Toronto on October 13, 2016. "The industry is evolving toward producing more craft beers, which are growing at a faster... Read More

Cleaning Products & Equipment, Materials & Material Processing, Non-Industrial Products

Tissue Manufacturer Benefits from Upgrade to Unidrive M

Oct 13, 2016

A leading manufacturer of tissue and paper-based consumer products has upgraded to Control Techniques Unidrive M variable speed drives.Soffass SpA, based in Porcari, Italy, is part of the Sofidel group of companies. It produces a range of products including Regina, as well as a wide selection of other products aimed at the global consumer tissue paper market. These include toilet paper, kitchen... Read More

Cleaning Products & Equipment, Materials & Material Processing

Hard Surface Floor Cleaning System efficiently replaces mops.

Oct 13, 2016

Working akin to push-behind autoscrubbers, OmniFlex™ SUV™ all-in-one, multipurpose floor cleaning system eliminates need for mops and mop buckets as well as janitor carts, wet vacs, dust mops, and autoscrubbers. Included aluminum wand enables cleaning of smaller or grouted areas. Battery-powered unit cleans up to 20,000 ft²/hr. Read More

Computer Hardware & Peripherals, Materials & Material Processing

Interface Panel Glass achieves uncluttered visual.

Oct 11, 2016

When backlit, Dynamic Deadfront Interface Panel Glass illuminates and draws attention to icons and alpha-numeric indicators as required. When non-backlit, icons remain hidden and panel retains monochromatic look. Fabricated from float, low expansion Borofloat® 33, or High Ion-Exchange aliminosilicate flat glass, panels range from 0.3 x 0.3 to 18 x 24 in. with thicknesses from 0.03–1 in.... Read More

Materials & Material Processing

Cold Chain Technologies Wins "Most Innovative New Cold Chain Technology of the Year" Award for Koolit® Advanced PCM Gel

Oct 10, 2016

Global Thought Leader Recognized for Industry's First Solid Phase Change Material (PCM) Solution HOLLISTON, Mass. - Cold Chain Technologies (CCT), an industry leading manufacturer and provider of temperature-controlled packaging solutions is a proud recipient of the 2016 Cold Chain Global Excellence Awards for "Most Innovative New Cold Chain Technology of the Year" on behalf of its innovative... Read More

Adhesives & Sealants, Materials & Material Processing

Super Heavy-Duty Tape supports molten metal below weld joint.

Oct 07, 2016

Argweld® Weld Backing Tape™ provides support needed to produce perfect weld underbeads when welding with currents of up 80, 160, 240, or 600 A. Supporting and protecting weld root from oxidation, this glass fiber weld backing system traps inert gas from weld torch to hold gas surrounding weld pool and effectively provide back purge facility. Each of 4 grades features 3 in. wide... Read More

Materials & Material Processing, Non-Industrial Products, Safety & Security Equipment, Textile Industry Products

Flame-Resistant Outerwear targets oil and gas workers.

Oct 06, 2016

Featuring GORE-TEX® PYRAD® Fabric for use in foul weather, GORE® FR Apparel meets demanding needs of oil and gas workers. Jacket, bib, and detachable hood combination provides protection from incidental flame exposure and weather protection across wide range of environmental conditions, while offering moisture management to optimize comfort and safety. Lightweight 2-layer ePTFE membrane... Read More

Materials & Material Processing, Non-Industrial Products, Safety & Security Equipment

ArmorSource Selects Honeywell Spectra Shield® For Helmets Used By U.S. And International Militaries

Oct 06, 2016

Spectra Shield® is ideal material to meet new requirements for combat helmets MORRIS PLAINS, N.J. - Honeywell (NYSE: HON) announced today that ArmorSource LLC, a leading provider of advanced ballistic head protection products, is using Honeywell Spectra Shield® ballistic composite materials to create helmets that meet and exceed the latest military requirements in the U.S. and around the... Read More

Materials & Material Processing, Non-Industrial Products, Safety & Security Equipment

KDH Defense Systems Chooses Honeywell Materials For Products Designed For U.S. Military Protection System

Oct 06, 2016

Spectra Shield® and Gold Shield® help military achieve goals for reducing soldiers' body armor weight MORRIS PLAINS, N.J. - Honeywell (NYSE: HON) announced today that KDH Defense Systems will use Spectra Shield® and Gold Shield® ballistic composite materials to create new soft armor vest systems as part of the U.S. Army's next-generation Soldier Protection System (SPS).... Read More