Materials & Material Processing

Materials & Material Processing

HYDRON® SE 230A Defluxing Agent is aqueous-based.

Feb 13, 2017

Designed to remove flux residues, HYDRON® SE 230A agent is aqueous-based and single-phase cleaning agent. Product is used to remove residues from lead frames, discrete devices, power modules, power LEDs, flip chips and CMOS from semiconductor electronics.

Read More

Materials & Material Processing

CIMPERIAL 35-880 Emulsion features CimShield® Technology.

Feb 09, 2017

Suitable for manufacturing aircraft components made with aluminum, titanium, steels and cobalt-based alloys, CIMPERIAL 35-880 Emulsion is used in heavy-duty machining and grinding operations. Using CimShield Technology, CIMPERIAL offers stability and pH buffering of mix and provides corrosion protection. CIMPERIAL 35-880 Emulsion is free from boron and formaldehyde releasing agent.

Read More

Materials & Material Processing, Textile Industry Products

WeatherMAX 3D Fabric can be stretched up to 30–100%.

Feb 02, 2017

Offering flexibility to fit almost any project, WeatherMAX 3D Fabric made from 100% pigment solution-dyed. Delivering long-term UV and fade resistance, product is designed with HydroMAX to make it water resistant. Product is suitable for sun shades and protective covers.

Read More

Materials & Material Processing, Paints & Coatings

Color Pigment System comes with ColorActiv® Technology.

Jan 30, 2017

Used for military vehicles and structures, Color Pigment System is highly reflective, energy saving colorants. Depending on color choice, product offers 23% to 77% reflectivity. Allowing dark colors with more reflectivity, product's colorActiv® technology reduces surface temperature.

Read More

Chemicals & Chemical Processing, Materials & Material Processing

SANIWEDGE™ Wedge Wire Screen is resistant to abrasion.

Jan 28, 2017

Available in .005 in. and 0.0015 in. retentions, SANIWEDGE™ Wedge Wire Screen can be shaped to curved panels, conical strainers and triangular sections. Suitable in water and waste, aggregate and mineral processing, pulp and paper, chemical, petrochemical, food, drug and beverage industries, product acts as filler media for use in basket strainers and resin traps.

Read More

Materials & Material Processing, Paints & Coatings

Borosilicate and Aluminosilicate Glass Solutions offer EMI shielding.

Jan 27, 2017

Enhancing product reliability and scratch resistance, Borosilicate and Aluminosilicate Glass Solutions are used on image and biosensors, displays and touch panels. Borosilicate glass solutions are available in 0.3 to 1.1 mm thickness whereas Aluminosilicate Glass Solutions are available in 0.4 to 0.21 mm thickness. Used as bolt or blond in layers, product can accommodate flexible and non-flat... Read More

Materials & Material Processing

Phase Change Materials are silicon-free.

Jan 27, 2017

Available in TPM350 and TPM550 models, Phase Change Materials enhance performance with thermal shock and can operate in -40 to +125˚C temperature range. Minimizing contact thermal resistance, TPM350 has thermal conductivity of 3.5W/m.K at 50°C temperature. Featuring thixotropic characteristics, TPM550 has thermal conductivity of 5.5W/m.K with 45˚C activation temperature. TPM350 and TPM550... Read More

Adhesives & Sealants, Materials & Material Processing

Devcon® Dfense Blok™ with Ez Mix Technology Simplifies Wear & Abrasion Protection in Colder Climates

Jan 27, 2017

DANVERS, MA - Devcon DFense Blok EZ Mix™ provides the same exceptional wear and abrasion protection as original DFense Blok™, but is easier to mix in colder climates.

DFense Blok™ alumina ceramic bead-filled epoxy wearing compound is specially formulated to outperform and outlast traditional epoxy wear and abrasion products - even in the most severe impact and sliding abrasion... Read More

Lubricants, Materials & Material Processing

STINGER Lubrication Compounds protect against seizing and galling.

Jan 27, 2017

Available in STINGER™ HDD, STINGER™ HDD-AG and STINGER™ ENVIRO variants, STINGER Lubrication Compounds consist of extreme pressure additives and corrosion inhibitors. Providing unrivaled galling and seizing protection, STINGER™ HDD, STINGER™ HDD-AG offer copper look and feel. Used in environmentally sensitive areas, STINGER™ ENVIRO is made of non-metallic lubricating compound and... Read More

Materials & Material Processing

Ideal®TrueJet® Inkjet Roll Papers feature smooth surface.

Jan 27, 2017

Used in commercial printers and document centers, Ideal® TrueJet® uncoated inkjet roll papers has brightness of 92 and high opacity. Product is offered in 20/50 lb. and 24/60 lb. uncoated text for daily transactional statements, documents, newsletters and direct mail applications.

Read More

Materials & Material Processing

ReleaSys Mold Release Agent is thermally stable.

Jan 25, 2017

Compatible with resins, composites, urethanes and elastomers, ReleaSys Mold Release Agent provides water-based options for reducing environmental impact. Reducing downtime and scrap rates, product minimizes mold fouling. Suitable for construction, marine, recreational and wind energy industry, ReleaSys is made from wax- and silicone-free release agents and offers high slip, chemical resistance... Read More

Materials & Material Processing

Henkel to Showcase Broad Range of Enabling Electronic Materials at IPC APEX Expo 2017

Jan 25, 2017

New Henkel Materials Push beyond Conventional Limits, Improve Reliability and Performance

January 24, 2017 – At next month’s IPC APEX Expo (APEX) event in San Diego, California, Henkel Adhesive Technologies’ electronics business will display a full range of state-of-the-art electronic materials, all designed to push the conventional limits of performance capability. From February... Read More

Materials & Material Processing

New Benchmark for Thin Film Performance

Jan 21, 2017

Carteret, NJ - Saturday, January 21, 2017- Fujipoly’s SARCON® 30XR-Um Thin Film sets a new standard for performance and compressibility. The putty-like thermal gap filler pad exhibits a thermal conductivity of 17 watt/m-k and a thermal resistance of only 0.02 °Cin2/W.

The unique physical properties of this thermal interface material allow it to be compressed quickly using a very low... Read More

Materials & Material Processing

800 Series Hybrid Extrusion Tool reduces stagnation.

Jan 18, 2017

Eliminating weld lines in materials through patented overlapping technology, 800 Series Hybrid Extrusion Tools reduce propensity for errors caused by gels breaking through thin wall, weld lines and process variations. Featuring common deflector bore, product produces consistent finished product. Reducing sensitivity to changes in viscosity and in line speed, unit offers low residence time and... Read More

Cleaning Products & Equipment, Materials & Material Processing

ZESTRON to Feature Latest pH Neutral Defluxing Agent at APEX

Jan 18, 2017

[Manassas, VA - January 17, 2017] - ZESTRON, the global leading provider of high precision cleaning products, services and training solutions in the electronics manufacturing and semiconductor industries, is pleased to announce that the latest addition to our pH neutral product family, VIGON® N 680, will be featured at ZESTRON’s booth this year at APEX.

“We are excited to feature... Read More

Materials & Material Processing

New Zeus LCP Monofilament Named Top Prize Winner in Innovation Tours

Jan 18, 2017

Orangeburg, S.C. (Jan. 17 , 2017 ) – Recently Zeus received consecutive innovation awards at two medtech conferences for its development of a novel extruded Liquid Crystal Polymer (LCP) for use in percutaneous catheter - based devices . LCP monofilament addresses a market need for medical device components that are suitable for use in MRI - guided vascular intervention. LCP monofilament took... Read More

Cleaning Products & Equipment, Material Handling & Storage, Materials & Material Processing

300 Agitating Hot Tank

Jan 13, 2017

Viking Blast & Wash Systems has been manufacturing industrial cleaning equipment for 40+ years. Our wash systems have evolved over that time as business and cleaning needs have changed. it's not uncommon to hear in any heavy equipment industry, they don't make them like they used to". With Viking it's just the opposite. We have utilized advances in technology as well as expertise... Read More

Materials & Material Processing

Carbon Steel Grinding Balls are designed for power plants.

Jan 13, 2017

Measuring 1-1/4 in., Carbon Steel Grinding Balls meet 62-65 hardness rating. Ensuring minimal lead time, units are packed in 2000 LBS and steel drums are strapped to pallets.

Read More

Materials & Material Processing, Thermal & Heating Equipment

Lucifer Furnaces HS8 Series for High Speed Steel Heat Treating

Jan 13, 2017

Lucifer Furnaces, Inc. has designed a delivered a dual chamber furnace ideal for heat treating high speed steels. The HS8 Series, built with rugged 12-gauge sheet steel and reinforced throughout, heats to 2450°F in the upper chamber with silicon carbide heating elements mounted across the roof and below the hearth. Elements are a solid bar type with termination connections for easy service... Read More

Materials & Material Processing

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

Jan 13, 2017

King of Prussia, PA - USA - Paratherm Corporation recently revised the engineering bulletin for the Paratherm™ HR Heat Transfer Fluid, for high temperature-range processing applications. The product is an alkylated-aromatic based heat transfer fluid formulated for closed-loop liquid-phase heating to 650°F in fired heaters and 675°F in waste-heat recovery and full convection heaters. With... Read More