Spindle Machines include integrated bar loader.
Single-spindle, Models Deco 10a and 13a feature Robobar SBF 216, which reduces channel guide changeover time down to 15 min. With quick-change system, operators index guide block to proper size capacity and changeover is complete. System accommodates up to 150 bars in sizes from 2-16 mm. Gripper system adjusts to whatever bar size is being used in machine. All setups are integrated into machine...
Read More »
Roll Feeds handle thin stock with -
Waddington LD Series features brushless, low-inertia servo motor and closed-loop brushless feedback for absolute position feedback. Coupled with 2 in. dia smooth steel finish rolls; heavy-duty dowel pinned frame; permanently lubricated, anti-friction bearings; and anti-backlash gears between top and bottom rolls, products handle thin stock at speeds to 1,000 SPM. They come in sizes for stock...
Read More »
Screwless Feeders accurately dose masterbatch or additives.
Utilizing induced flow rotating cone, Micro Feeder B110 can dose down to a few granules at a time and up to 6.6 lb/hr of normal masterbatch. Posimax B200 employs positive displacement feeding and has only one moving part. Materials are fed via rotating channel, delivering true mass flow as materials are displaced from inlet to outlet. Intended for plastics processing, both feeders are pre-wired...
Read More »
Bulk Solids Pump Feeder is available in 3 models.
Available in gravimetric, volumetric, and loss-in-weight models, Bulk Solid Pump (BSP) feeders utilize positive displacement to feed free-flowing materials. They offer uniform discharge, consistent volume, and gentle handling. Vertical rotating discs create product lock-up zone, smoothly conveying material from storage hopper to discharge outlet and achieving true linear mass flow. Feed rates...
Read More »
Why You Need a Dehumidification System in Your Residential Swimming Pool Room
Learn about the role of dehumidifiers in indoor pool applications.
Read More »
Wire Feeder suits modular, multi-process use.
Digitally-controlled, Power Feed(TM) 10M features 4 drive rolls and optional push-pull capability for aluminum welding. Using Nextweld Waveform Control Technology(TM), each weld mode meets standards for low spatter, weld bead profile, and arc shape. MSP4 user interface panel controls all parameters including weld mode selection, arc control adjustments, weld sequence, limit setting, and lockout....
Read More »
Volumetric Screw Feeder features direct drive.
Metatech(TM) provides accurate metering of powders, pellets, flakes, and agglomerates. It features 2 or 3 moving parts, depending on screw size; O-ring seals for dust-free operation; and TeflonÃ-® rear seal. Interchangeable screw/tube combinations from 1-6 in. permit feed rates from 0.3-550 cu-ft/hr. Agitator/conditioner screw completely fills feed screw for accuracy of Ã-
Read More »Welding System uses digital communication protocol.
Multi-process Power Wave-® 355M power source, with Power Feed(TM) 10M wire feeder, features push-pull aluminum MIG capabilities. It is also capable of Stick, TIG, MIG, Synergic MIG, Pulsed, and Flux-Cored welding as well as arc gouging. Unit features ArcLink-® open digital communications protocol and is rated 350 A, 34 V @ 60% duty cycle. Full amperage range is 5-425 A. Unit comes factory...
Read More »
Feeder dispenses rolls of dunnage and wrapping materials.
Foot-pedal operated feeder dispenses Kraft paper, foam, bubble pack, Kimpac, and newsprint at speed of 10 in. per second with accuracy of Ã-
Read More »Wire Feeder suits high-production shops.
Semi-automatic Model LF-72 is available in base model, standard-duty bench, and heavy-duty bench model that can accept up to 60 lb spools. Feeder can accommodate .023-1/16 in. MIG wire diameters and .035-5/64 in. flux-cored wire diameters at feed speeds of 50-800 ipm. Two-roll, Universal Wire Drive System is made of die-cast aluminum for consistent wire feeding. Model LF-72 includes 400 A...
Read More »Bar Feeder accommodates up to 100 bars.
Robobar SBF-532 magazine-style feeder features quick-change system that accepts bar sizes from 5-32 mm. To provide stable transition zone between bar feeder and sliding headstock, bar gripper mechanism adjusts automatically to whatever bar size is being used. All setups are integrated into PNC-DECO machine control, streamlining programming time and machine/loader operation. Feeder is suited for...
Read More »
ISO-Certified J&D Tube Benders Delivers Rapid Tubeline Fabrication Services
J&D Tube Benders' laser cutting and machining services provide accurate and complex features on tubes of all shapes and sizes. Check out the video to learn more!
Read More »
