Materials Feeders

Materials Feeders

Digital Press Sheet Feeder enables dual-mode finishing.

When connected to HP Indigo digital presses and other equipment with right-to-left paper paths, left-exit Bourg Sheet Feeder enables dual mode production.Â- Unique feature allows finisher to operate both in-line and off-line while connected to press, or as near-line intelligent standalone finisher. On finishing side, feeder can connect with Bourg Bleed Crease Module and Bourg Booklet Maker,...

Read More »
Tandem Sheet Feeder enables non-stop finishing.
Materials Feeders

Tandem Sheet Feeder enables non-stop finishing.

Able to operate in-line or off-line, Tandem Bourg Sheet Feeder pairs 2 feeders alternatively feeding printed sheets under program control to any compatible automatic booklet maker, binder, or other finishing device. While one tandem Bourg BSF feeder is being loaded or ready to go, other can feed printed covers and content up to 26 x 14.3 in. at full-rated speed of finisher. Operating at speeds up...

Read More »
ARKU Exhibits New High-speed Servo Press Feed and Demonstrates Parts Leveling with New User-friendly Control
Materials Feeders

ARKU Exhibits New High-speed Servo Press Feed and Demonstrates Parts Leveling with New User-friendly Control

Hi-Speed ServoMaster® press feed handles strip up to 600 mm2 cross section at velocities up to 200 m/min with ±0.1 mm accuracy. New control on FlatMaster® parts leveler requires just two parameters to produce dead-flat, stress relieved parts. CINCINNATI, Ohio –Â- ARKU Coil Systems, Inc. will showcase its new Hi-Speed ServoMaster® press feed system at FABTECH. The...

Read More »
Materials Feeders

Coperion K-Tron, Hosokawa, and Sly to Present Complimentary Technical Seminar and In-house Product Demonstrations on Milling and Material Handling - October 14 & 15, 2014 at Hosokawa Facility, Summit, NJ

Coperion K-Tron, together with Hosokawa Powder Micron Systems and Sly, Inc. will host a complimentary in-house demonstration on milling and material handling for chemical, food, pharmaceutical, and mineral applications. The event will be held on October 14 and October 15 (offered twice for convenience) at Hosokawa's Summit, New Jersey facility.Â-  Coperion K-Tron will present on key...

Read More »
COE Service Team Gives New Life to Viking's Press Feeds
Materials Feeders

COE Service Team Gives New Life to Viking's Press Feeds

Smoke and water damaged equipment restored like new Sterling Heights, Mich. – When custom metal stamper Viking Inc. (Columbia City, Ind.) suffered a factory fire earlier this year much of the equipment escaped the flames, but was rendered inoperable by the smoke and water damage from its fire protection system. This included two COE Press Equipment servo roll feeds with control panels that were...

Read More »
Bar Feeder delivers multi-diameter stock versatility.
Materials Feeders

Bar Feeder delivers multi-diameter stock versatility.

Multi Mini Rhinobar® facilitates multi-diameter bar stock processing via feedtube cartridge that automatically centers and feedsÂ- 3 sizes of small-diameter bar stock to Swiss-style CNC screw machines and sliding-head lathes. Cartridges sizes are 0.25 x 0.375 x 0.5 in., 0.25 x 0.5 x 0.75 in., and 0.375 x 0.5 x 0.635 in., and each 3-tube cartridge is enclosed in aluminum barrel. With...

Read More »
COE Ships Progressive Press Feed Line to Hudson Industries
Materials Feeders

COE Ships Progressive Press Feed Line to Hudson Industries

Sterling Heights, Mich. –Â- COE Press Equipment announced that it has shipped a new coil feeding line to Hudson Industries (Hudson, IN), a manufacturer of metal stampings for the automotive industry. Commissioned to feed a new Eagle 400T progressive die press, the new coil handling and feeding line has a maximum coil width capacity of 36”, coil weight capability up to 30,000#, and can...

Read More »
Plastic Handle Applicator is designed for high throughput.
Materials Feeders

Plastic Handle Applicator is designed for high throughput.

Located directly after capper,Â- handle applicator utilizes continuous motion roll-feed design to achieve 2, 4, 6, 8, and 12 packs and offers up to 600 bottles/min throughput. Roll-feed design reduces operator time as well as number of dies required to one die per bottle neck size (as opposed to pack-size configuration). To change rolls, operators weld end of in-use...

Read More »
Materials Feeders

Complete Chlorination System facilitates design, increases safety.

Chlorination SAFE Station (CSS) is composed of insulated fiber-reinforced plastic (FRP) building, gas feed equipment, gas detectors, scales, scrubber, controls, and safety equipment. While FRP building stores up to 15 cylinders, 150 lb EST™ type DHS 400 dry emergency chlorine scrubber. LatterÂ- treats accidental gas releases of chlorine/sulphur dioxide at leak rate in accordance with...

Read More »
Lincoln Electric Brings a Complete Orbital TIG Solution to Weld Various Pipe and Tube Sizes and Applications
Materials Feeders

Lincoln Electric Brings a Complete Orbital TIG Solution to Weld Various Pipe and Tube Sizes and Applications

New clamp-on style weld heads and off-board feeders expand the orbital system for welding smaller-diameter pipe and tube ClevelandÂ- – The Lincoln Electric Company is bringing welding operators in refineries, power generation and pressure vessels a single system solution for welding various pipe and tube sizes with the new HELIX® C450 and C663 weld heads. With these orbital TIG (gas...

Read More »

All Topics