Materials Feeders

Bundle Loader aids in manufacturing automation.
Materials Feeders

Bundle Loader aids in manufacturing automation.

With 6 ft capacity, Bundle Master Model 610 loads barfeeder or other device with bars Â-¼-3 in. in diameter. Users load device with bundle of bars weighing up to 1 ton and turn it on; unit continues to supply bars to Barfeeder at pace required until bundle is gone. Machine offers high- and low-sensing and height adjustment and requires 115 Vac single-phase power. It is also available in 12...

Read More »
Materials Feeders

Wire Feeder is digital and portable.

Power Feed(TM) 15M delivers multi-process performance in package that meets IP23 environmental rating. It works with Power Wave® power sources, which feature Nextweld(TM) Waveform Control Technology® and digital communications. Systems are pre-loaded with 60+ welding programs, selectable at wire feeder. Heavy-duty, cast aluminum wire drive system has 2 gear-driven rolls and split wire...

Read More »
Materials Feeders

Tablet Feeder provides consistent disinfection solution.

ClorTab(TM) High Volume Pressure Tablet Feeder safely produces continuous supply of chlorine equivalent hypochlorite disinfection solution. It is available with output capacities up to 120 ppd and can produce either 0.9 wt% or 5.0 wt% equivalent hypochlorite solution. ClorTab produces up to 5 lb/hour of solution on demand, allowing continuous dosing from dosing tank, and can hold tablet package...

Read More »
Wire Feeder suits automated applications.
Materials Feeders

Wire Feeder suits automated applications.

Digitally-controlled Power Feed(TM) 10R, part of modular, multi-process welding system, mounts to robot arm or can be used for hard automation. Four drive roll wire feeder operates on 40 Vdc input power, and features split wire guide that aligns and supports wire through feeding system. Brass-to-brass connections allow optimum connectivity between feeder and gun. Unit is capable of MIG, pulsed...

Read More »
Mini Feeders offer hopper capacities to 1 cubic foot.
Materials Feeders

Mini Feeders offer hopper capacities to 1 cubic foot.

Suited for dry material, Mini Feeders are offered with screws sizes to 1Â-½ in. and hoppers to 1 ft³ to accommodate materials requiring more retention and conditioning time for proper control. Products offer feed rates of up to 8.8 ft³/hr and feature modular design, which allows flexibility to upgrade feeder to adapt to change in materials or material characteristics.

Read More »
Materials Feeders

In-Feeder offers load-on-the-fly operation.

Large Capacity In-Feeder 3000 intelligently dispenses large volumes of materials including catalogs of different sizes, brochures, paper, small cards, and CDs. Capacity is 48 in. for catalogs or up to 4,000 sheets of paper. Based on average feed time of 4 sec/catalog, user can stack up to 384 catalogs that are 1/8 in. thick in one load for disbursement, which would provide running time of over 25...

Read More »
Materials Feeders

Feed System offers reclaim rates up to 1,200 lb/hr per screw.

Granulate Feed System enables plastic film and sheet processors to reclaim and reuse edge trim and roll scrap. Separate chambers feed virgin resins and fluff into extruder to ensure ratio of fluff to virgin is consistently achieved. Variable speed motor-driven auger automatically adjusts feed rate based on speed of extruder. Unit fits in round, square, oval, and rectangular extruder throats...

Read More »
Rotary Airlock Feeders are precision machined.
Materials Feeders

Rotary Airlock Feeders are precision machined.

Available in 6 standard models in up to 9 different sizes, heavy-duty Precision-Aire units offer housings and end plates cast from grey iron. Rotors are fabricated from steel, and vanes are welded onto shaft and then machined. Use of steel prevents vanes from breaking off when foreign objects become lodged between rotor and housing. Standard models can be fitted with specialized rotors, bearings,...

Read More »
Roll Feeds permit on-the-fly micro-adjustments.
Materials Feeders

Roll Feeds permit on-the-fly micro-adjustments.

Servo-Driven Roll Feeds include control panel and software that lets users perform press adjustments in 0.0001 in. increments while feed is running. Additional offerings include cut-to-length cycle, kerf-cut cycle, and 14 gag outputs and programmable patterns. Capable of storing up to 200 jobs, products are available from 0.002-0.315 in. thick and come in push, push-pull, or pull configurations....

Read More »
Volumetric Feeder suits water treatment chemicals.
Materials Feeders

Volumetric Feeder suits water treatment chemicals.

AccuFeed Vibrating Volumetric Feeder provides precision feeding of water and wastewater treatment chemicals. Available in sizes from 1-6 in., with feed capacities from 2.8-600 cu ft/hr, unit is accurate to ±1-2% in feeding materials such as activated carbon, alum, and diatomaceous earth. Polyethylene construction is inert and non-corrosive. Quick disassembly design allows easy cleaning...

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers