Materials Feeders

Dry Powder Feeder aids in cement particle sizing.
Materials Feeders

Dry Powder Feeder aids in cement particle sizing.

Compatible with Mastersizer 2000 laser diffraction-based particle size analyzer, Scirocco 2000 meets sample dispersion needs for measuring cements and other abrasive bulk chemicals. Design facilitates routine, reproducible dry powder analysis and allows for manual or automatic operation. Unit includes vibrating hopper feed system and predefined SOP that controls sample delivery, dispersion, and...

Read More »
Prefeeder/Wire Payout works with cutting machines.
Materials Feeders

Prefeeder/Wire Payout works with cutting machines.

Dependent upon material condition, Model APF100 is designed for wire sizes .030-.312 in. and can be used with any Wire and Tubing Cutter or Cut and Strip Machine. Unit prevents material overruns when used with intermittent feed machines. Offering max drive speed of 100 ips, free-standing device accommodates reels up to 18 in. in diameter and 12 in. in width.

Read More »
Plastics Processor uses screwless feeding technique.
Materials Feeders

Plastics Processor uses screwless feeding technique.

Posimax B300 accurately doses free flowing masterbatch or additives into process screw via screw-less feeding mechanism. There are no pockets or screws, and machine incorporates feeding disc as only moving part. Material is fed via rotating disc that creates product lock-up zone, identifying 4 areas where materials pass through. Model B300 feeds materials at rate of 11-1,100 lb/hr.

Read More »
Micro Feeder offers rates as low as 20 g/hr.
Materials Feeders

Micro Feeder offers rates as low as 20 g/hr.

Model MT12, offered in loss-in-weight and volumetric feeder versions, is available for continuous or batch operation. Scale in loss-in-weight models can be installed with optional draft shield. Configured for standard industrial or sanitary applications, feeder design allows feeder bowl to discharge almost completely when emptying. Unit will accurately feed rates from 20-2,000 g/hr, depending on...

Read More »
Quick Change Feeder is designed for short, customized runs.
Materials Feeders

Quick Change Feeder is designed for short, customized runs.

Quick Change/Quick Clean T35/S60 lets user change from single screw S60 to twin screw T35 configuration as material needs change. It handles feed rates from 0.004-160 ftÂ-³/hr depending on material density. Multi-purpose feeder is available with 2 bowl/screw sets that mount to same gearbox and can be cleaned and swapped out in minutes. Available in volumetric and gravimetric models, product...

Read More »
Materials Feeders

Automatic Bar Feeder has bar capacity of 8-80 mm dia.

Master 880 is compatible with all fixed headstock lathes, and feeds round, square, and hex-shaped bars with minimal noise and no vibration. Precise bar feeding and positioning are controlled by CNC with integrated PLC. Machine can be configured with one of 3 large-capacity magazines that can be located on either side. Bar changeover is 35 sec for 12 ft bars. Patented 2-stage Double Pusher feeding...

Read More »
Materials Feeders

Bar Feeder offers changeovers in under 1 min.

Featuring 2,100 x 1,100 mm footprint, CNC-controlled VIP 80E is suited for running low-to-medium sized production volumes of round, square, and hex bar stock. New bar loads into lathe spindle while last piece is being machined. Rear-mounted 10-30Â-º inclined plane loading rack accommodates sixty 10 mm diameter precut bars, and depending on workpiece, VIP 80E can be operated continuously. Max...

Read More »
Materials Feeders

Automatic Bar Feeders handle 5-65 mm bars at 450 mm/sec.

Model TS 560 Rack comes with 3-4 superimposed moveable rack magazine with capacity of seventy 25 mm diameter bars, while Model TS 560 Bundle magazine offers 2.5 ton capacity. Change time is 25-30 sec for 12 ft bars. Feeders can be connected to automatic and CNC lathes, either fixed or sliding headstock, and with any type of bar-working machine. Guide channels made of wear-resistant spring steel...

Read More »
Materials Feeders

Bar Feeder complements high-speed CNC lathes.

Equipped with 300 mm, sloping plane, multi-bar magazine, TAL 65 feeds bars from 5-65 mm at 250-500 mm/sec. Dual bar support principle uses hydraulic immersion and dynamic support in elastic guide channel to provide high-speed feeding, even when bars are slightly bent. Closed-loop re-circulating oil system feeds oil into elastic guide channels, eliminating bar vibration. Mechanical...

Read More »
Materials Feeders

Spindle Machines include integrated bar loader.

Single-spindle, Models Deco 10a and 13a feature Robobar SBF 216, which reduces channel guide changeover time down to 15 min. With quick-change system, operators index guide block to proper size capacity and changeover is complete. System accommodates up to 150 bars in sizes from 2-16 mm. Gripper system adjusts to whatever bar size is being used in machine. All setups are integrated into machine...

Read More »
Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring
Sponsored

Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring

Krueger Sentry Gauge, a leader in chemical sight gauges, now offers the ultimate in aggressive liquid storage monitoring devices. From sulfuric and hydrochloric acid to bleach, and acetone, our products are designed with robust features that deliver a long and trouble-free service life. See our video to learn all about this new and innovative line of sight gauges.

Read More »

All Topics