Material Processing

Screening System fits base machines up to 60,000 lbs.
Screening Separators

Screening System fits base machines up to 60,000 lbs.

Trommex Rotary Screener accepts mesh screens ranging from 3/4 to 12 in. spacing. Self-contained unit has anti-spillage plates at open end, lifting bars to maximize screening area, remote grease points with easy access, as well as fully machined surfaces. Trommex can convert to mixer for cement or contaminant stabilization. Relief valve only requires 20 gpm, accommodating all hydraulic pressure...

Read More »
Compressed Air Dryer works without heat.
Dryers

Compressed Air Dryer works without heat.

Hydrobloc HB Series heatless desiccant dryer provides ultra dry compressed air down to -100°F dewpoint. It includes maintenance free shuttle valves, high efficiency coalescing prefilter, and particulate removal afterfilter. Dryers are available in 17 models rated from 55 to 3,250 scfm. Non-lubricated switching valve works with 2 solenoid-operated purge valves.

Read More »
Vibrating Screen is available in sizes up to 6 x 18 ft.
Screening Separators

Vibrating Screen is available in sizes up to 6 x 18 ft.

BHST high-speed vibrating screen separates fine materials due to typical screen inclination of 30 deg, effective material bed management, and high G-force operation. It employs either end-tensioned screen cloth or modular urethane deck, offers unitized vibrating mechanism, and runs in bath of oil with internal and external labyrinth seals. Precision-constructed, jig-assembled unit incorporates...

Read More »
Protective Sleeves save labor.
Sleeves

Protective Sleeves save labor.

Coated, ballistic Cordura(R) Sidewinder sleeves, with industrial hook and loop closure, allow easy assembly and removal. Sleeves install without disconnecting hydraulic, electrical, and pneumatic hose and cable bundling and can be removed easily for hose maintenance. Material is available in variety of circumferences and bulk lengths to 150 ft for OEM and maintenance operations.

Read More »
Air Dryer offers alternative to refrigerant technology.
Desiccant and Membrane Dryers

Air Dryer offers alternative to refrigerant technology.

Balston Membrane Air Dryer will dry compressed air to dewpoints as low as -40°F at flow rates up to 100 SCFM. It has no moving parts and operates without attention. Coalescing prefiltration is employed immediately upstream of membranes to protect them from pipe scale, particulate, and liquids. Dryer requires no electrical connections, which makes it ideal for remote and point-of-use...

Read More »
Desiccant Air Dryer works without heat.
Desiccant and Membrane Dryers

Desiccant Air Dryer works without heat.

Optima LX Series heatless desiccant compressed air dryer provides ultra dry air required for critical compressed air applications. It has maintenance free shuttle valves, high efficiency coalescing prefilter, and particulate removal afterfilter. Non-lubricated switching valve and two solenoid-operated purge valves replaces up to 13 separate valves used in company's other designs. Dryers are...

Read More »
Belt-Driven Boom positions robots and gantries.
Work and Load Positioners

Belt-Driven Boom positions robots and gantries.

DGEA toothed-belt-driven electric boom-arm axis is suitable for positioning applications requiring horizontal or vertical projecting motions. Fixed pinion drive mechanism engages stationary toothed belt, causing projecting structure to traverse work envelope. Roller guide bearing system is integrated into housing. Unit has stroke range of 100-1,000 mm, payload of 110 lb, speed of 2.1 m/sec, and...

Read More »
Shot Blaster is suitable for concrete, steel, and stone.
Abrasive Blast Equipment

Shot Blaster is suitable for concrete, steel, and stone.

Blastrac® 1-5HH hand-held shot blaster can be used for decorative concrete applications such as stenciling and more. Virtually dust-free, 1-5HH cleans and prepares small floor and wall surfaces, balconies and stairways, and small metal surfaces such as weld seams. Applications of this 110V unit include cleaning, contouring, and preparation for repair and restoration work. 1-5HH may be used...

Read More »
Curing Systems

UV Curing System operates in power class of 500 watts/in.

Six inch Light Hammer 6 consists of 2 modular components: microwave-irradiator and solid-state power supply. Electrode-less bulb, mounted in elliptical reflector, focuses intense strip of light 2.1 in. below surface of lamp. System repeatedly cycles from high power to very low power over a few seconds. Power output from 25 to 100 percent is controlled from front panel or remotely through analog...

Read More »
Curing Systems

UV Curing System can be used individually or in groups.

PowerCure(TM) 3, three in., microwave-powered lamp system operates in 250 watts/in. power class. It can be used in focused (10mm) or out-of focused distances, fits into X-Y tables, and requires minimal amounts of air for positive pressure cooling. PowerCure 3 is available with D-bulb, and achieves rapid startup using technology that does not require separate igniter bulb. Full cure width and...

Read More »
Dies & Stamping Services with Over 25 Years of Experience
Sponsored

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers