Material Processing

Desiccant Air Dryer works without heat.
Desiccant and Membrane Dryers

Desiccant Air Dryer works without heat.

Optima LX Series heatless desiccant compressed air dryer provides ultra dry air required for critical compressed air applications. It has maintenance free shuttle valves, high efficiency coalescing prefilter, and particulate removal afterfilter. Non-lubricated switching valve and two solenoid-operated purge valves replaces up to 13 separate valves used in company's other designs. Dryers are...

Read More »
Belt-Driven Boom positions robots and gantries.
Work and Load Positioners

Belt-Driven Boom positions robots and gantries.

DGEA toothed-belt-driven electric boom-arm axis is suitable for positioning applications requiring horizontal or vertical projecting motions. Fixed pinion drive mechanism engages stationary toothed belt, causing projecting structure to traverse work envelope. Roller guide bearing system is integrated into housing. Unit has stroke range of 100-1,000 mm, payload of 110 lb, speed of 2.1 m/sec, and...

Read More »
Shot Blaster is suitable for concrete, steel, and stone.
Abrasive Blast Equipment

Shot Blaster is suitable for concrete, steel, and stone.

Blastrac® 1-5HH hand-held shot blaster can be used for decorative concrete applications such as stenciling and more. Virtually dust-free, 1-5HH cleans and prepares small floor and wall surfaces, balconies and stairways, and small metal surfaces such as weld seams. Applications of this 110V unit include cleaning, contouring, and preparation for repair and restoration work. 1-5HH may be used...

Read More »
Curing Systems

UV Curing System operates in power class of 500 watts/in.

Six inch Light Hammer 6 consists of 2 modular components: microwave-irradiator and solid-state power supply. Electrode-less bulb, mounted in elliptical reflector, focuses intense strip of light 2.1 in. below surface of lamp. System repeatedly cycles from high power to very low power over a few seconds. Power output from 25 to 100 percent is controlled from front panel or remotely through analog...

Read More »
Curing Systems

UV Curing System can be used individually or in groups.

PowerCure(TM) 3, three in., microwave-powered lamp system operates in 250 watts/in. power class. It can be used in focused (10mm) or out-of focused distances, fits into X-Y tables, and requires minimal amounts of air for positive pressure cooling. PowerCure 3 is available with D-bulb, and achieves rapid startup using technology that does not require separate igniter bulb. Full cure width and...

Read More »
Filter Driers clean refrigerant in one pass.
Dryers

Filter Driers clean refrigerant in one pass.

Dual in-line One-Pass Filter Driers provide 35 column in. of desiccant that is able to clean and dehydrate refrigerant on single pass to very near ARI-700 specifications. Installing filter on inlet side of purge tank helps protect purge tank from corrosion and acid build-up, helps prevent corrosion build-up on purge tank heat transfer coils, and helps remove acid and moisture from chiller's...

Read More »
Tilt Trays are made of ABS plastic.
Trays

Tilt Trays are made of ABS plastic.

Replacement Tilt Trays for sorters are thermoformed from 3/8 in. thick ABS plastic, and feature chemically-bonded back lip for additional strength. Weighing 9.2 lbs each, virtually unbreakable tilt trays are available to fit sorters manufactured by Alvey, Buschman, Crissplant, Dematic, HK Systems, Kosan, and Matthews. Trays are drilled to OEM specifications for direct replacement.

Read More »
Machine combines shearing, press-braking, and rolling.
Shears

Machine combines shearing, press-braking, and rolling.

TRI-FAB Model 52P features shearing and rolling capacity of 52 in. x 12 ga mild steel and press braking capacities of 12 ga at 36 in. and 14 ga at 52 in. Machine will cut stainless steel up to 0.072 in. Rotating shafts are journalled in bronze bearings, and shear blades are Grade T10 tool steel. Manually-operated back gauge is standard, and can be positioned for use with shear or press brake as...

Read More »
Stretched Blast Cabinet has illuminated interior.
Abrasive Blast Equipment

Stretched Blast Cabinet has illuminated interior.

Model 999 extended pressure-blast system, with added weight capacity and component-handling facilities, is designed for blast treatment of large tube and pipe fabrications. Its 48 x 48 x 144 in. work envelope is fitted with multiple blast nozzles that can be used from each of 6 operator workstations. Cabinet is equipped with track extension and transfer cart that moves by means of ball screw-ball...

Read More »
Resin Dryer matches speed of plastics processors.
Air / Hot Air Dryers

Resin Dryer matches speed of plastics processors.

LPD(TM) Low Pressure Dryer dries resin batches of 400 lbs within 4 hours, and requires 80% less energy than 100 lb/hr desiccant dryers. It uses vacuum to pull moisture from within pellets and carries out heating and vacuum drying simultaneously in separate stations. It essentially transforms batch processes into continuous processes. Dryer makes it possible to change materials or colors without...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers