Material Processing

Shot Blaster is suitable for concrete, steel, and stone.
Abrasive Blast Equipment

Shot Blaster is suitable for concrete, steel, and stone.

Blastrac® 1-5HH hand-held shot blaster can be used for decorative concrete applications such as stenciling and more. Virtually dust-free, 1-5HH cleans and prepares small floor and wall surfaces, balconies and stairways, and small metal surfaces such as weld seams. Applications of this 110V unit include cleaning, contouring, and preparation for repair and restoration work. 1-5HH may be used...

Read More »
Curing Systems

UV Curing System operates in power class of 500 watts/in.

Six inch Light Hammer 6 consists of 2 modular components: microwave-irradiator and solid-state power supply. Electrode-less bulb, mounted in elliptical reflector, focuses intense strip of light 2.1 in. below surface of lamp. System repeatedly cycles from high power to very low power over a few seconds. Power output from 25 to 100 percent is controlled from front panel or remotely through analog...

Read More »
Curing Systems

UV Curing System can be used individually or in groups.

PowerCure(TM) 3, three in., microwave-powered lamp system operates in 250 watts/in. power class. It can be used in focused (10mm) or out-of focused distances, fits into X-Y tables, and requires minimal amounts of air for positive pressure cooling. PowerCure 3 is available with D-bulb, and achieves rapid startup using technology that does not require separate igniter bulb. Full cure width and...

Read More »
Filter Driers clean refrigerant in one pass.
Dryers

Filter Driers clean refrigerant in one pass.

Dual in-line One-Pass Filter Driers provide 35 column in. of desiccant that is able to clean and dehydrate refrigerant on single pass to very near ARI-700 specifications. Installing filter on inlet side of purge tank helps protect purge tank from corrosion and acid build-up, helps prevent corrosion build-up on purge tank heat transfer coils, and helps remove acid and moisture from chiller's...

Read More »
Tilt Trays are made of ABS plastic.
Trays

Tilt Trays are made of ABS plastic.

Replacement Tilt Trays for sorters are thermoformed from 3/8 in. thick ABS plastic, and feature chemically-bonded back lip for additional strength. Weighing 9.2 lbs each, virtually unbreakable tilt trays are available to fit sorters manufactured by Alvey, Buschman, Crissplant, Dematic, HK Systems, Kosan, and Matthews. Trays are drilled to OEM specifications for direct replacement.

Read More »
Machine combines shearing, press-braking, and rolling.
Shears

Machine combines shearing, press-braking, and rolling.

TRI-FAB Model 52P features shearing and rolling capacity of 52 in. x 12 ga mild steel and press braking capacities of 12 ga at 36 in. and 14 ga at 52 in. Machine will cut stainless steel up to 0.072 in. Rotating shafts are journalled in bronze bearings, and shear blades are Grade T10 tool steel. Manually-operated back gauge is standard, and can be positioned for use with shear or press brake as...

Read More »
Stretched Blast Cabinet has illuminated interior.
Abrasive Blast Equipment

Stretched Blast Cabinet has illuminated interior.

Model 999 extended pressure-blast system, with added weight capacity and component-handling facilities, is designed for blast treatment of large tube and pipe fabrications. Its 48 x 48 x 144 in. work envelope is fitted with multiple blast nozzles that can be used from each of 6 operator workstations. Cabinet is equipped with track extension and transfer cart that moves by means of ball screw-ball...

Read More »
Resin Dryer matches speed of plastics processors.
Air / Hot Air Dryers

Resin Dryer matches speed of plastics processors.

LPD(TM) Low Pressure Dryer dries resin batches of 400 lbs within 4 hours, and requires 80% less energy than 100 lb/hr desiccant dryers. It uses vacuum to pull moisture from within pellets and carries out heating and vacuum drying simultaneously in separate stations. It essentially transforms batch processes into continuous processes. Dryer makes it possible to change materials or colors without...

Read More »
Mats

Non-Skid Safety Mat works when submerged.

Non-skid surface on presence-sensing industrial safety mats is totally submersible as to reduce risk of slipping on surfaces covered with grease and oil. Applications include robotic welding, laser welding and cutting, pick and place robots, plastics blow molding machines, assembly machinery, water jet machines, automated material handling, packaging machinery, textile machinery, paper converting...

Read More »
Heat Exchangers keep uninsulated enclosures cool.
Exchangers

Heat Exchangers keep uninsulated enclosures cool.

ProAir heat exchangers can significantly reduce heat rise in sealed, uninsulated enclosures and extend life of enclosed electronics. Model XR20 will limit heat rise to 24°F above ambient and XR29 will keep temperature within 15°F above ambient. Both are available in 115 or 230 V and 50/60 Hz configurations and can be mounted to any internal or external surface of enclosure. Heat...

Read More »
Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions
Sponsored

Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions

Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.

Read More »

All Topics