Material Processing

Test Sieves meet or exceed ISO standards.
Sieve Screens

Test Sieves meet or exceed ISO standards.

Corrosion-resistant test sieves are made of high-alloy 316L steel. One-piece body includes individual lasering of mesh width. Resistant-welded sieve-frame construction provides permanently stretched wire gauze. Groove- and solder-free transition eliminates cross contamination and makes cleaning easy. Each sieve comes with seal ring for tight sieve stacks and low-noise operation.

Read More »
Belt Slitter cuts light to heavy grade belting.
Slitters

Belt Slitter cuts light to heavy grade belting.

Next Generation(R) Power Belt Slitter is free standing, hydraulically operated, and self-contained. Rewind assemblies at in-feed and out-feed can be engaged or disengaged to facilitate winding, loading, and unloading. ACME screw-scissor lift system lifts rolls up to 50,000 lbs. Knife holders allow use of 5/8 and 3/4 in. Hyde-type blades or Stanley exacto razor blades. High-speed capability of 250...

Read More »
Air-Operated Transporters move product trays.
Vibrators

Air-Operated Transporters move product trays.

Models 450 and 850 operate on air pressure causing material to advance on slow-acceleration forward stroke, but remain stationary during rapid return stroke. Travel speed or product flow is adjustable with air-pressure control setting. Options include motion sensors for automatic shutoff, cover guards for harsh environments, quick-release clamps for tray removal, and adjustable bearing supports...

Read More »
Electric Bench Furnace suits heat-treating applications.
Furnaces

Electric Bench Furnace suits heat-treating applications.

No. 886 dual-chamber furnace comprises upper chamber with operating temperature to 2200 deg F and lower chamber with operating temperature to 1250 deg F. Nickel-chrome wire coils, supported by ceramic plates, provide 40 kW of heat (20 kW in each chamber). Each chamber has 6 in. thick walls made from 2 in. of 2300 deg F ceramic fiber and 4 in. of block insulation. Both chambers have individual...

Read More »
Screening System fits base machines up to 60,000 lbs.
Screening Separators

Screening System fits base machines up to 60,000 lbs.

Trommex Rotary Screener accepts mesh screens ranging from 3/4 to 12 in. spacing. Self-contained unit has anti-spillage plates at open end, lifting bars to maximize screening area, remote grease points with easy access, as well as fully machined surfaces. Trommex can convert to mixer for cement or contaminant stabilization. Relief valve only requires 20 gpm, accommodating all hydraulic pressure...

Read More »
Compressed Air Dryer works without heat.
Dryers

Compressed Air Dryer works without heat.

Hydrobloc HB Series heatless desiccant dryer provides ultra dry compressed air down to -100°F dewpoint. It includes maintenance free shuttle valves, high efficiency coalescing prefilter, and particulate removal afterfilter. Dryers are available in 17 models rated from 55 to 3,250 scfm. Non-lubricated switching valve works with 2 solenoid-operated purge valves.

Read More »
Vibrating Screen is available in sizes up to 6 x 18 ft.
Screening Separators

Vibrating Screen is available in sizes up to 6 x 18 ft.

BHST high-speed vibrating screen separates fine materials due to typical screen inclination of 30 deg, effective material bed management, and high G-force operation. It employs either end-tensioned screen cloth or modular urethane deck, offers unitized vibrating mechanism, and runs in bath of oil with internal and external labyrinth seals. Precision-constructed, jig-assembled unit incorporates...

Read More »
Protective Sleeves save labor.
Sleeves

Protective Sleeves save labor.

Coated, ballistic Cordura(R) Sidewinder sleeves, with industrial hook and loop closure, allow easy assembly and removal. Sleeves install without disconnecting hydraulic, electrical, and pneumatic hose and cable bundling and can be removed easily for hose maintenance. Material is available in variety of circumferences and bulk lengths to 150 ft for OEM and maintenance operations.

Read More »
Air Dryer offers alternative to refrigerant technology.
Desiccant and Membrane Dryers

Air Dryer offers alternative to refrigerant technology.

Balston Membrane Air Dryer will dry compressed air to dewpoints as low as -40°F at flow rates up to 100 SCFM. It has no moving parts and operates without attention. Coalescing prefiltration is employed immediately upstream of membranes to protect them from pipe scale, particulate, and liquids. Dryer requires no electrical connections, which makes it ideal for remote and point-of-use...

Read More »
Desiccant Air Dryer works without heat.
Desiccant and Membrane Dryers

Desiccant Air Dryer works without heat.

Optima LX Series heatless desiccant compressed air dryer provides ultra dry air required for critical compressed air applications. It has maintenance free shuttle valves, high efficiency coalescing prefilter, and particulate removal afterfilter. Non-lubricated switching valve and two solenoid-operated purge valves replaces up to 13 separate valves used in company's other designs. Dryers are...

Read More »

All Topics