Material Processing

Shredder destroys paper, computer media, and more.
Shredders

Shredder destroys paper, computer media, and more.

Model 200 shredder disintegrator reduces paper to particles less than 3/32 X 3/32 in., exceeding Department of Defense standards. It has rotary knife mill, with two knives mounted on solid steel rotor and two knives on stationary bed. As rotor spins, waste is continually cut by knives until it is small enough to fit through 3/32 in. steel screen. Shredder can also destroy CDs/DVDs, floppy discs,...

Read More »
Blaster cleans castings and deflashes dies.
Abrasive Blast Equipment

Blaster cleans castings and deflashes dies.

Wheelabrator(R)45 cu ft Super V Tumblast(TM) is suitable for castings, diecast deflashing, contaminant removal, peening, and surface finishing. Direct-drive 75 hp motors power two 15 in. bi-directional wheel assemblies. Cast-manganese housings have LongLyfe(R) cast liners for durability. Control panel has programmable electric controls or relay logic in NEMA 12 enclosure. Machine holds 45 cu ft...

Read More »
Laser Target works with rotating alignment systems.
Alignment Services

Laser Target works with rotating alignment systems.

Indoor scan target, with self-contained numeric readout, is compatible with any manufacturer's continuously sweeping laser alignment system. Model A-1531 has max resolution of 0.010 in. Model A-1532 has max resolution of 0.005 in. Radial range, governed by rotation speed and spot size, is 100 ft. max. Target displays readings relative to target center, relative to zero, or relative to base of...

Read More »
Sensors / Detectors / Transducers

Multi-Point Sensor scalps aluminum ingots.

B8 Sensor has 8 individual laser points spaced every 3.0 in. over 2 ft length. Depth of measurement range of each laser point is up to 14 in., with accuracy of +/- 0.020 in. and resolution of less than 0.010 in. Binocular vision system verifies information collected. With 2 DSP computer chips, B8 can be linked or multiplexed with other units. 16-bit controller and RS-485 or RS-232 interface...

Read More »
Tray Packing Machine eliminates hand labor.
Packaging Machinery

Tray Packing Machine eliminates hand labor.

Compact Model 170 packs rigid and semi-rigid containers into variety of corrugated tray types including display, half height and full height. Corrugated dividers may be inserted automatically between product rows for label protection and to add stacking strength. Steel folding arms square and seal each tray around product load for tight-packed trays. Components that contact product are stainless...

Read More »
Round Insert Cutter offers productivity ratio of 10:1.
Mills

Round Insert Cutter offers productivity ratio of 10:1.

CoroMill(R) 300 round insert cutter is suitable for machining of materials from soft aluminum to hardened steel. Designed for multi-axis milling, CoroMill 300 is available in long shank versions for machining deep closed pockets and narrow cavities with shallow radial and axial cuts. Available diameters range from 0.375 to 0.750 in. Precision ground inserts are available in carbide grades GC1025,...

Read More »
Refrigerated Dryers are enviromentally friendly.
Refrigerated Air Dryer

Refrigerated Dryers are enviromentally friendly.

Refrigerated Dryers, with capacities from 1000 to 3000 scfm, have working pressures of 200 psig (max). Smooth surface, tube-in-tube, copper heat exchangers resist fouling, and provide heat transfer. All units use R-404a refrigerant, and contain no CFC's. Filtered separator equipped with Filter Monitor is standard on all models. Units also include Demand Manager(TM) microprocessor control system,...

Read More »
Dry Grinders produce single micron material.
Material Processing Mills

Dry Grinders produce single micron material.

HSA Dry Grinding Attritors have side discharge screen, and media size of 1-3mm, allowing micron sized products to be generated continuously. Shaft speeds range from 400 to 1800. Devices provide dry grinding, resulting in extremely fine material. Applications include ceramic powders, glass frits, metal powders, mechanical alloying, metal oxides, fibers and celluose.

Read More »
Nesting Trays withstand high temperatures.
Miscellaneous Trays

Nesting Trays withstand high temperatures.

Reinforced polymer composite drying trays withstand continuous exposure to temperatures from -60 to 400 deg F. They can be used for drying and curing seals, gaskets, electronic components, pigments and bulk chemical powders requiring drying and oven processing. Nesting trays are impervious to radiation, acids, chemicals and alkaline solutions. They can be stacked several feet high, and stacked...

Read More »
Lathe Mill serves as complete machining center.
Lathes

Lathe Mill serves as complete machining center.

Prazi Powerturn Powermill SD400-BF400 enables operator to perform turning, facing, milling and drilling applications. Lathe has V-way bed, spindle accuracy of 0.0002 in., and 9 spindle speeds from 170 to 3360 rpm. It is driven by 2/3 hp motor with 110V electrics. Head swivels 180° and has MT2 spindle with heavy-duty column and quill. All dials are in inch graduations.

Read More »

All Topics