Material Processing

Surface Prep Tool features dual position blade holders.
Surface Treatment Equipment

Surface Prep Tool features dual position blade holders.

Model SP-17 provides environmentally safe removal of hard surface deposits such as epoxy, fiberglass, glue, grout, ice, packed soil, paints, and build-up on concrete floors. Dual position blade holders are designed in knockdown position with rear slot for aggressive scraping on tough debris. Tool is only for use on standard 175 rpm rotary floor machine with 1Â-½ hp motor.

Read More »
Laser Alignment System facilitates roll maintenance.
Aligners

Laser Alignment System facilitates roll maintenance.

RollAlign(TM) visual laser tool facilitates field replacement of process rolls. Laser emitter unit, mounted on reference roll, projects two Class 2 fanned 635 nm laser lines onto reflector unit mounted on roll to be moved. This allows operator to view vertical angle (pitch) and horizontal angle (parallelity) as roll is adjusted into alignment. Product fits rolls of any diameter spaced between...

Read More »
Cage Mill offers 2-4 or 6-row design.
Material Processing Mills

Cage Mill offers 2-4 or 6-row design.

Series H Multi-Cage Mill comes in 4 sizes up to 250 tph. Air cannons are mounted at intake and discharge to help prevent build-up of wet sticky material, while heaters are installed on grinder housing to retard buildup of wet material. Hydraulic ram eliminates gear head motor and rack and pinion used on other cage mills. Selective-crushing, controlled-impact mill sizes minerals, agglomerates,...

Read More »
Rotating Mixer operates at speeds from 4-40 rpm.
Impeller / Propeller / Turbine - Agitators / Mixers

Rotating Mixer operates at speeds from 4-40 rpm.

Model RT10 is capable of mixing 50, 0.5 ml and 48, 1.5 ml centrifuge tubes with snap-on caps or screw down caps in end-over-end motion. Rotator operates from wall-mounted universal power supply, which provides 12 Vdc to unit. Speed control has off position fully counter-clockwise with 270° of rotation between off and full on. Sample holders are available for 16, 15 ml or 6, 50 ml centrifuge...

Read More »
Knife Mill grinds coated tablets for analysis.
Material Processing Mills

Knife Mill grinds coated tablets for analysis.

Grindomix GM 200 is able to grind 20 gelatin-coated tablets in a few seconds, providing homogenous sample for analysis. It features feed size of 10-40 mm and produces final fineness down to approximately 0.3 mm. Parameters can be set for reproducible results. Grindomix GM 200 is particularly suitable for grinding larger tablets and plants with high fat or moisture content.

Read More »
Side-Entering Impeller utilizes hydrofoil design.
Impellers

Side-Entering Impeller utilizes hydrofoil design.

Constructed from 316 stainless steel, 317L stainless steel, Hastelloy C276, or titanium, Maxflo WSE employs hydrodynamic design to improve cavitation resistance. Bolted-blade design is available in 4-blade model or 6-blade model for shock-loaded applications. Applications include industries such as pulp and paper, flue-gas desulphurization, and petroleum blending and storage.

Read More »
Compressed Air Dryer provides continuous operation.
Dryers

Compressed Air Dryer provides continuous operation.

Scalable, modular Model MVP-HD removes moisture at point-of-use. It is based on technology that uses molecular sieve in desiccant cartridge. Each cartridge alternates between cycle of air-drying and regeneration. Desiccant life is indefinite and replacement is only necessary should it become contaminated.

Read More »
Sifters feature gyratory and pneumatic operation.
Screening Separators

Sifters feature gyratory and pneumatic operation.

GyroSift is available with 1-3 sieves in choice of 3 sieve types. Suited for applications requiring small screen areas, it can be floor-mounted or suspended. Pneumatic, in-line, Model QA24 has smooth surfaces and snap-on neoprene gaskets that do not use adhesives. Net screen area is 4-10 ftÂ-² and capacity is 25-350 lb/min. Intended for high sanitation environments, system can be inserted...

Read More »
Vibrators

Portable Vibrator facilitates material flow.

Magnevibe employs pneumatic piston vibrator with magnetic mounting head that allows it to stick firmly to ferrous surfaces. Ferrous mount pad stickers are available to enable product to work with plastic and stainless steel hoppers. Single unit may be moved around as needed to any bin or hopper location where flow is restricted. Product is suited for use on small storage vessels.

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers