Material Processing

Refrigerated Air Dryer

Hot Air Station dries and cures on variable speed conveyor.

Portable Hot Air Station can be custom-configured with Leister Hotwind-S air blowers, from 2,000-5,400 W, that reach up to 1,472°F with air flows to 38 cfm. Its Dorner® variable speed conveyor features anodized aluminum frame and locking casters. In addition to various nozzles, brackets, guides, and rails, system can incorporate one or more heat guns mounted up to 18 in. over...

Read More »
Hot Plates and Stirrers offer digital controls.

Hot Plates and Stirrers offer digital controls.

Measuring 10 x 7 x 4.5 in., Models HS20 Stirring Hot Plate, HP20 Hot Plate, and ST20 Stirrer feature heating surface constructed of solid white 6 x 6 in. ceramic glass. They withstand up to 30 lb by weight and offer temperature settings of 30-450Â-ºC, stirring ranges of 100-1,500 rpm, and 2 memory keys to store settings. Available in 100, 115 and 230 Vac with 3-wire ac line cord, units are...

Read More »

Membrane Systems extract clean hydrogen from reformed fuels.

Based on palladium alloy membranes, commercial hydrogen separators are able to tolerate and remove sulfur from reformed fuel streams. Separators are designed to be coupled with fuel reformers, including methanol, ethanol, natural gas, propane, ammonia, gasoline, and diesel fuels. Membranes also provide capability to separate hydrogen from alternative fuels such as land-fill gases, synthesis...

Read More »

Grinder increases particle uniformity and minimizes fines.

Model 1052 SAP Gran-U-Lizer(TM), designed for grinding super absorbent polymers (SAPs), features balance and vibration analysis (BAVA) that senses when product moisture levels elevate beyond tolerable range. While able to sense material elasticity change and notify plant personnel, BAVA can also predict bearing failures before they occur. In addition to grinding SAP materials, product also works...

Read More »
Screening Separators

Sanitary Batch Sifter is FDA-, USDA-, and cGMP-compliant.

Dust-tight Batch Sifter, constructed with stainless steel housing, motor, and stand, is offered in 18, 24, and 30 in. dia and can be equipped with single or twin imbalanced-weight gyratory motors. With gap-free flange arrangement, unit scalps oversize particles down to 38 microns from dry bulk powders or solids-laden slurries and may be disassembled without tools for sanitizing. Wire mesh...

Read More »
Converting Machinery

Digital Converter converts analog audio/video to DVD.

Presto! digital converter transfers audio/video from any playback device with AV-out or S-Video-out, and simultaneously records to standard DVD without going through computer's hard drive. When burning to standard DVD+RW discs, user can continue to add clips from various sources to create extended video compilations until disc capacity is reached. Software allows users to choose between Record...

Read More »
Heat Sinks

Heat Sinks cool condensed electronic packages.

Fabricated from lightweight extruded aluminum, maxiFLOW(TM) heat sinks are utilized for cooling BGAs and hot components inside electronic systems. Featuring low profile spread fin arrays to enable convectional air cooling within restricted/low air flow conditions, they are available in lengths and widths ranging from 10 x 10 mm to 60 x 60 mm, and heights starting at 2 mm.

Read More »

Laboratory Pellet Press provides sample preparation.

With max pressure of 25 tons, manual hydraulic Model PP 25 is suited for preparation of solid samples for x-ray fluorescence and spectral analysis. Dies are available in diameters of 32 and 40 mm. Due to polished pressure plates, surface of dies is prepared to meet requirements of XRF analysis. Materials such as limestone, which do not form stable pellet even under pressure, can be stabilized...

Read More »
Miscellaneous Trays

Cable Tray features preinstalled splice.

Able to facilitate installation with already-in-place splices, FCF 54 Fasclic tray requires users to fold out preinstalled splices, align 2 tray sections, and snap splices in place. One pair of pliers is all that's required to bend locking tabs for safe, secure splice. Suited for lightweight cable runs, product measures 10 ft x 2 or 4 in. x 2 in. Fabrication can be done on-site using side action...

Read More »

Can and Pail Crusher generates 13,000 lb of force.

Connected to standard shop air, Big Squeeze can crush 1-gallon cans in less than 30 seconds and 5-gallon pails in less than 1 minute. For safety, machine will not operate unless heavy-duty door is closed. Safety regulator insures that operator is never exposed to any potential hazards.

Read More »
Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions

Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions

Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers