Material Processing

Miscellaneous Processors

SoC Processors address IPv4 and IPv6 network requirements.

Based on cnMIPS64 CPU core, OCTEON CN31XX and CN30XX SoC single/dual core processors have up to 256 KB L2 cache and feature I/Os including Gigabit Ethernet networking interfaces, PCI/PCI-X, DDR2, USB 2.0 with PHY, and TDM/PCM for voice applications. Available with frequencies from 300-550 MHz, power consumption from 2-7 W, and application performance from several hundred Mbps to 2 Gbps.

Read More »
Miscellaneous Processors

SPARC Processor targets space industry.

Produced on 0.18 Â-µm CMOS process, radiation hardened, 32-bit Model AT697 implements LEON2 FT VHDL model and includes SPARC V8 Integer unit, Floating Point unit, separate instruction and data caches, PCI interface, and memory controller that can interface with SRAM, PROM, and SDRAM. Unit operates with 1.8 and 3.3 V power supplies for core and I/O buffers, respectively. Housed in ceramic...

Read More »
Impeller / Propeller / Turbine - Agitators / Mixers

Sanitary Mixer operates to 29½ Hg and 25 psig.

Constructed with 316 SS wetted parts and polished to 180 grit, tri-shaft VersaMix Model VMC-50 features disk type disperser, 3-wing anchor with TFE scrapers to clean side-walls of vessel, gas purged shaft seals, and 50 psi jacketed dished bottom vessel to permit heating or cooling during processing. Mixer is suited for manufacturing chemicals, plastics, and electronics with viscosities up to...

Read More »
Miscellaneous Processors

SoCs are designed for wireless applications.

Available in 2 configurations, OCTEON CN30XX MIPS64® SoC processors provide multi-100 Mbps application performance and include integrated Gigabit Ethernet interfaces. They integrate custom MIPS64 processor core with advanced multi-layer application acceleration and security processing hardware for delivering wired and wireless (802.11a/b/g/n) broadband routers, gateways, wireless access...

Read More »
Fine Screen employs European step bar technology.
Screens

Fine Screen employs European step bar technology.

ScreenMaster® ST, constructed of stainless steel, comes in various widths, heights, and screen openings to promote optimal degree of solids separation to meet application requirements. As solids accumulate into mat on screen, level sensor is activated, and unit is energized. Motor reciprocates bars, incrementally moving material up bar screen steps. When they reach top, solids fall off into...

Read More »
Miscellaneous Processors

Single- and Dual-Core Processors offer VoIP support.

Used to add VoIP ports to Secure Routers and Gateways, Triple Play devices, and Wireless Gateways, OCTEON CN31XX and CN30XX processors consist of 1-16 MIPS64-based cores with 100 Mbps to 10 Gbps application performance. Included vPort software provides complete VoIP Customer Premises Equipment (CPE) solution with variety of voice features. Other features include integrated Ethernet and/or SPI4.2...

Read More »
Belts

Timing Belts feature bifilar tension member arrangement.

Truly endless (BFX) polyurethane timing belts utilize bifilar design that represents tension member arrangements with left hand and right hand lay. Tension members alternate to prevent formation of lateral forces, balancing timing belts for true tracking. Bifilar technology minimizes friction forces, lending to positioning accuracy in belt drives. It also improves pitch stability by minimizing...

Read More »
Shot Blasting System prepares concrete surfaces.
Abrasive Blast Equipment

Shot Blasting System prepares concrete surfaces.

Used on concrete prior to application of paint or coatings, portable Model 1-9DEZ runs on 120 V and can strip, clean, and profile in one step, without rinsing or drying time. With 9 in. blast pattern and manual travel speed, blaster can prepare up to 275 sq ft/hr. Applications include residential garage floors, pool decks, concrete preparation prior to installation of wood flooring, small...

Read More »
Metal Separator suits plastic processing applications.
Magnetic Separators

Metal Separator suits plastic processing applications.

Featuring neodymium magnets, NEO FF Series Drawer Magnet captures and holds small ferrous metal particles. EPDM drawer gasket resists heat aging and magnetic latch keeps No-Spill(TM) Slide Gate open under high vibration conditions. Mountable at injector throat and locked in place by high-torque nylon knobs, unit features SS housing and center drawer guide that facilitates easy removal and...

Read More »
Refrigerated Air Dryer

Hot Air Station dries and cures on variable speed conveyor.

Portable Hot Air Station can be custom-configured with Leister Hotwind-S air blowers, from 2,000-5,400 W, that reach up to 1,472°F with air flows to 38 cfm. Its Dorner® variable speed conveyor features anodized aluminum frame and locking casters. In addition to various nozzles, brackets, guides, and rails, system can incorporate one or more heat guns mounted up to 18 in. over...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers