New: Buy Now on Thomas and Pay Over Time with Credit Key   Learn More

Material Processing

Envirocleanse LLC inTank™ Ballast Water Treatment System Submits Application to US Coast Guard for Type Approval Certificate

Envirocleanse LLC inTank™ Ballast Water Treatment System Submits Application to US Coast Guard for Type Approval Certificate

HOUSTON, July 30, 2018 /PRNewswire/ -- Envirocleanse LLC, division of Charter Brokerage LLC, a BERKSHIRE HATHAWAY company, announces submission of an application to the US Coast Guard for Type Approval of its patented inTank™ Ballast Water Treatment System. The Envirocleanse inTank™ BWTS is the only applicant to date which treats ballast water during the voyage. There is no...

Read More »
New Pressure-Sensitive Safety Mats Come in Single-Piece Molded Construction

New Pressure-Sensitive Safety Mats Come in Single-Piece Molded Construction

Rockford Pressure-Sensitive Safety Mats are designed to detect presence of worker, vehicles or production materials. The units are resistant to wear, oils, grease and acids and are suitable for use industrial environments such as robotic welding, water jets, tube tenders, conveyors and CNCs. The mat’s top surface features rib pattern running parallel with mat length that prevent slipping. The...

Read More »
New Automated Coating Inspection Line from Nordson Asymtek Allows for More Quality Control

New Automated Coating Inspection Line from Nordson Asymtek Allows for More Quality Control

The new Automated Coating Inspection line from Nordson Asymtek combines its Select Coat® SL-940 Conformal Coating system with the FX-940UV Series ACI/AOI Automated Conformal Coat Inspection system. The combination allows for continuous coating conformity and overall quality.  The coating system includes a wide range of features to monitor and control the full process. It features fan width...

Read More »
New ROSS Triple Shaft Mixer is Equipped with Air/Oil Hydraulic Lift

New ROSS Triple Shaft Mixer is Equipped with Air/Oil Hydraulic Lift

ROSS Triple Shaft Mixer VersaMix Model VMC-1 is offered with Model DS-1 custom discharge system mounted on common bench. Triple-Shaft VersaMix mixer is available with capacities ranging from 1 to 1000 gal and features independently driven low and high speed agitators. The unit is designed for vacuum operation up to 29.5 in. Hg and viscosities up to 1 million centipoise. The mixer comes with two...

Read More »
New SuperSleeve Wall Sleeves Come with Stainless Steel Anchoring Screws

New SuperSleeve Wall Sleeves Come with Stainless Steel Anchoring Screws

Marketair’s SuperSleeve Wall Sleeves are designed for insulated linesets, electrical/communications cabling and condensate drain hose. The 7.5 cm diameter sleeves can be flanged on both ends and telescopes from 15 to 30 cm. SuperSleeve comes with internal positive slope guide, an integral corrugated PVC cable guide for separating electrical/communications wiring from the linesets and drain hose...

Read More »
Two-Stage Plastic Pellet Classifier Features Removable Screening Deck

Two-Stage Plastic Pellet Classifier Features Removable Screening Deck

With No Tools, Witte Innovation Invites Easy Access for Cleaning Washington, NJ: The two-stage Witte 700 Series classifiers from process equipment manufacturer The Witte Co., Washington, New Jersey (www.witte.com), automatically screen the plastic pellets through two, consecutive screening decks, each perforated with holes based on the required pellet diameter. As pellets enter the infeed, the...

Read More »
New MitySOM-A10S-DSC Processor Board Comes with Dual-Side Connectors

New MitySOM-A10S-DSC Processor Board Comes with Dual-Side Connectors

MitySOM-A10S-DSC Processor Board is designed for machine vision, test and measurement, embedded instrumentation, industrial automation and control applications. Unit comes with Intel®/Altera Arria® 10 SoC with dual core ARM and up to 480KLE FPGA fabric and two DDR4 RAM memory subsystems. Supporting OpenCL™ and high-level synthesis (HLS) tools, the processor accelerates design cycles.

Read More »
New MOB-DD-SS Dual-Drive Centrifugal Sifter Enables User to Enter Speed of the Variable Feed Screw Remotely

New MOB-DD-SS Dual-Drive Centrifugal Sifter Enables User to Enter Speed of the Variable Feed Screw Remotely

MOB-DD-SS Dual-Drive CENTRI-SIFTER™ Centrifugal Sifter is available with 304 or 316 stainless steel contact surfaces with cantilevered shaft design without bearing and hinged end cover. Unit is offered with fail-safe interlock system that features multiple and non-interchangeable keys. Sifter enables independent speed control of feed screw and helical paddle assembly to maximize feed control...

Read More »
New WXB Weigh Extrusion Blender Offers a Tolerance within -0.1% and +0.1%

New WXB Weigh Extrusion Blender Offers a Tolerance within -0.1% and +0.1%

WXB™ Weigh Extrusion Blender is available in WXB 100, WXB 200 and WXB 400 models for 100-220 lb/hr, 220-440 lb/hr and 440-880 lb/hr throughputs respectively. Unit comes with GIW weigh bin, LIW mix chamber and Maguire® 4088 controller. The Blender offers extrusion control depending on batch precision and metering accuracy. GIW weighs the batch ingredients whereas the LIW chamber makes accurate...

Read More »
Corona Treatment of Glass Sheets

Corona Treatment of Glass Sheets

It is often necessary to coat glass sheets as part of the manufacturing process. In order for liquid adhesives, glues, coatings or inks to adhere to the surface of moulded or extruded plastics, the process of increasing surface energy will improve surface wettability, thereby promoting stronger adhesion. Tantec has just delivered a complete SheetTEC solution for a customer in Central Europe,...

Read More »

All Topics