Material Processing

Burn-In System targets medium power devices.
Burn-In Chambers

Burn-In System targets medium power devices.

Featuring individual temperature control per DUT for 24 devices up to 20 W, LC-2 Logic Burn-In with Test System is suited for applications in engineering characterization, life testing, and production screening of logic devices. System accommodates up to 64 burn-in boards sized at 12.3 x 24 in. It includes 5 individually programmable power supplies per burn-in board, 16 pattern and power zones,...

Read More »
Washing Equipment

AirLoc Washing Machine Isolation Pads Help Keep Condo Building Quiet!

Ken Webster of The Webster Group wanted to insure that the condos they built at Centre Point of Summerfield Lands, British Columbia, would provide a quiet environment for tenants. AirLoc washer pads were used under every washer/dryer unit in the building, installed as shown below. Ken explained that We decided to use yours (AirLoc) over the competition because when we compared the two, yours...

Read More »
Metal Chip Processing System features portable design.
Oil Separators

Metal Chip Processing System features portable design.

Designed for small to medium machining shops and as add-on for larger operations, modular MiniSystem(TM) can reclaim cutting oil and coolants. Unit is fully portable and can be contained in area as small as 4 x 11 x 8 ft. Continuous processing, diagonal shaft wringer comes with bar-end separator and exerts 700 G's of force to extract up to 98% of cutting fluids. Dry chips are produced at rates up...

Read More »
Exchangers

GE Energy Announces Industrial Waste-Heat Recovery Innovation for Onsite Power Plants

GE's New Gas Engine-ORC Technology to Boost Efficiency of Onsite Power Projects Worldwide MUNICH, GERMANY-July 6, 2009-GE Energy and energy developer ECOS Ltd. have announced they plan to demonstrate an innovative, industrial waste-heat recovery system that will dramatically increase the efficiency and output of a 7.2 megawatt (MW) biogas power plant in the eastern Slovenia town of Lendava, near...

Read More »
Multifunctional Machine dries, cools, and classifies.
Air / Hot Air Dryers

Multifunctional Machine dries, cools, and classifies.

Developed for plastics industry, DC Classifier(TM) utilizes either positive or negative air flow to draw moisture and heat away from particulates to dry/cool material. Material continues through machine to classification stages, where oversize and fine particles can be removed. Modular decks facilitate removal for cleaning in-between process changes, when more than one material type or color is...

Read More »
Crushers

Tertiary Crusher outputs 35-44 tons/hour.

Accommodating material ranging from 4-35 mm, Rocky operates on 110 kW and outputs sand that is 97% usable material with minimal or no need for screening/re-circulating. With double impactor rotor design, machine eliminates need to adjust aprons. Rocky can take misshapen sand produced from cones and crush them again into more uniform shape and size suitable for jobs with strict quality control...

Read More »
Drying Systems are intended for solar cell metallization.
Heaters

Drying Systems are intended for solar cell metallization.

Along with belt speeds to 6 m/min and max throughput of up to 5,700 wph, RDS 2100 and RDS 3000 offer process and thermal control features that enable PV manufacturers to promote efficiency and yield. Drying process combines either 5 or 7 IR zones and one central convection zone, delivering temperature profiling adjustable for precision and flexibility. Horizontal throughput systems ensure safe...

Read More »
Surface Conditioning Discs feature quick change connectors.
Abrasive Coated Discs

Surface Conditioning Discs feature quick change connectors.

Featuring non-woven construction in coarse, medium, and very-fine aluminum oxide grits, Megabrite(TM) Surface Conditioning Quick Change Discs are designed for general purpose light grinding, blending, cleaning, and finishing applications using portable right angle grinder. They come with standard type R connectors. Available in sizes of 2 and 3 in., discs are suited for use on stainless steel,...

Read More »
Shredder reduces solids in sludge or raw sewage lines.
Shredders

Shredder reduces solids in sludge or raw sewage lines.

Utilizing spherical shredding mechanism, SUPER SHREDDER® in-line disintegrator cuts and shears sewage solids into fine bits. Hard faced stainless steel cutters feature 1-piece, replaceable design and offer wear resistance. Because of spherical rotor design, SUPER SHREDDER has less moving parts than units with banks of cutter disks and therefore requires minimal maintenance. System includes...

Read More »
The APEX(TM) Screener from ROTEX Global Achieves High-Capacity Screening and Increased Process Uptime
Screening Separators

The APEX(TM) Screener from ROTEX Global Achieves High-Capacity Screening and Increased Process Uptime

CINCINNATI, OH (June 23, 2009)-The APEX(TM) Screener from ROTEX Global, LLC, delivers increased uptime and yield with the same process efficiency and gyratory-reciprocating motion of the ROTEX® Screener. The APEX Screener is a self-contained, high-capacity production screening machine that incorporates new, ergonomically designed performance and service features for quick and easy...

Read More »
Performance Packaging's AIRSHIELD™ Achieves FDA Approval for Food & Beverage Applications
Sponsored

Performance Packaging's AIRSHIELD™ Achieves FDA Approval for Food & Beverage Applications

As a globally recognized provider of full-service packaging products and services, we have a history of developing innovative solutions that promote enhanced efficiency in a wide range of packing applications. Our new AIRSHIELD™ product is just another example of how we are helping food and beverage manufacturers to extend the life of their products. To learn more about this cutting-edge product, see our video.

Read More »

All Topics