Material Processing

Dymax Presents BlueWave MX-275 Flood-Curing System That Offers Uniformity Across the Cure Area

Dymax Presents BlueWave MX-275 Flood-Curing System That Offers Uniformity Across the Cure Area

The BlueWave® MX-275 UV LED Flood-Curing System uses emitters with 365, 385, or 405 nm wavelengths. The system delivers light energy in a line pattern that allows for consistent curing of batches. It can be set up as bench-top unit on an array stand or installed on automated curing processing equipment. Each emitter of the system offers 5 mm x 50 mm curing area when paired with a multichannel...

Read More »
Latest Multi-Tank Lab Attritor System is Offered with a Timing Belt

Latest Multi-Tank Lab Attritor System is Offered with a Timing Belt

The Custom Multi-Tank Lab Attritor System uses up to six grinding tanks and six agitator assemblies. The system is designed for accomplishing multiple test batches. The timing belt ensures all the connected Attritor shafts run at same speed for same period of time. It is equipped with a 3HP, TEFC motor that uses variable frequency drive and is used for grinding metal powders and advanced...

Read More »
New Gravitational Classifier is Equipped with Pneumatic Air Classifier System

New Gravitational Classifier is Equipped with Pneumatic Air Classifier System

The Gravitational Classifier automatically separates soft, dry materials without breakage, fragmentation or fines generation. The device passes current of air through continuous curtain of falling materials and directs the particulates towards series of vanes. The unit’s pneumatic air classifier system separates dry particles at cut point between 2 mm and 150 μm without using water and is...

Read More »
Danfoss to Present Efficient, Reliable and Connected Food Service Solutions at the NAFEM Show 2019

Danfoss to Present Efficient, Reliable and Connected Food Service Solutions at the NAFEM Show 2019

Product innovations support trend towards lower GWP refrigerants and connected cooling At The NAFEM Show—February 7–9, 2019—Danfoss Commercial Refrigeration experts will present a broad range of solutions for walk-in coolers and food service equipment. Visit Danfoss' Booth 212 to experience interactive modules that present cloud-based services for 24/7 cooling system management and...

Read More »
TECHSPEC Introduces Nd:YAG Harmonic Separators with RoHS Compliance

TECHSPEC Introduces Nd:YAG Harmonic Separators with RoHS Compliance

The Nd:YAG Harmonic Separators are offered in fourteen models with diameters ranging from 12.70 mm and 25.40 mm with wavelengths of 1064 nm, 532 nm, 355 nm and 266 nm. They are used for separating harmonic, frequency-doubled beam from the pump beam. The units are offered with beamsplitter coating on first surface and anti-reflective coating as second surface. The separators are designed for...

Read More »
Ferdinand-Braun-Institut Chooses ClassOne for Three Additional Wet Processing Tools

Ferdinand-Braun-Institut Chooses ClassOne for Three Additional Wet Processing Tools

Kalispell, MT – December 13, 2018 – ClassOne Technology, global supplier of wet processing equipment for ≤200mm semiconductor manufacturing, announced the sale of three more tools to the Ferdinand-Braun-Institut, Leibniz-Institut für Höchstfrequenztechnik (FBH) in Berlin, Germany. In recent weeks, FBH ordered ClassOne's high-performance 8-chamber Solstice® electroplating system. Now FBH...

Read More »
D. R. Technology and CTI Present Solution to Treat Flue Gas

D. R. Technology and CTI Present Solution to Treat Flue Gas

Valuable Heat Recovery and SO2 Removal from Pulp Mill D.R. Technology, Inc of Freehold, New Jersey has designed and supplied a high efficiency wet heat recovery/sulfur dioxide reduction replacement column at a large pulp mill in the Southeastern United States. The design treats the flue gas emanating from the facility’s recovery boiler. The column treats over 200,000 Cubic Feet per Minute of...

Read More »
New PLANTEX SUNFIRE Dual-Grain Disc Comes with Ceramic-Hybrid Cloth Flaps

New PLANTEX SUNFIRE Dual-Grain Disc Comes with Ceramic-Hybrid Cloth Flaps

The PLANTEX® SUNFIRE™ Ceramic Dual-Grain Disc is offered with 40/60 combination grit that grinds like 40 and blends like 60. The disc can be used on metals such as steel, stainless, titanium, aluminum and bronze. The unit comes with backing plate that is composed of 70% natural hemp fiber and is available in 4-1/2 and 5 in. diameters. The patented multigrain ceramic-hybrid grit structure of...

Read More »
CEVA's NeuPro Family of Edge AI Processors Wins Digital Semiconductor Product of the Year at Elektra Awards 2018

CEVA's NeuPro Family of Edge AI Processors Wins Digital Semiconductor Product of the Year at Elektra Awards 2018

MOUNTAIN VIEW, Calif., Dec. 12, 2018 /PRNewswire/ -- CEVA, Inc. (NASDAQ: CEVA), the leading licensor of signal processing platforms and artificial intelligence processors for smarter, connected devices, today announced that its NeuPro family of AI processors for deep learning at the edge has won Digital Semiconductor Product of the Year at the Elektra Awards 2018. These prestigious annual...

Read More »
Latest Moxie Vacuum Blender is Rated to 75 kPa

Latest Moxie Vacuum Blender is Rated to 75 kPa

The NuWave’s Moxie Vacuum Blender is offered in commercial grade design and construction with intuitive controls and advanced blade design. The product comes with four laser-cut hardened stainless-steel blades. The blender provides user with seven preset functions for drinks, smoothies, soups, sauces, nut butters and self-cleaning setting. The unit’s blade speed can be adjusted between 5,000...

Read More »

All Topics