Dual-Purpose Machine can be used for milling and screening.
QuadroÃ-® ComilSift allows processors to go from milling applications up to 15,000 lb/hr to security screening and delumping applications up to 99,000 lb/hr. Milling mode efficiency is optimized due to infeed diameter size, while positive 360Ã-º discharge of security screening mode segregates and retains impurities and other foreign materials to accelerate sifting times. Construction...
Read More »Malvern Scientists Demonstrate Sub-Nanometre Particle Size Measurement Using Dynamic Light Scattering
26 March 2009: Malvern, UK: In a paper published in the Journal of Nanoparticle Research (Volume 10, number 5, May 2008), scientists working at Malvern Instruments presented experimental protocols for measuring hydrodynamic particle diameters of less than 1 nm, with a precision of 0.1 nm. The work was carried out using a Malvern Zetasizer particle characterization system, which uses dynamic light...
Read More »
Heat Exchanger removes up to 3,000 W of enclosure heat.
Compatible with 48 Vdc and 115 Vac power supplies, CLIMAGUARD outdoor heat exchangers are double-crimped and dip-sealed to prevent harsh environmental elements from entering enclosure. With support for both surface- or recess-mounting, lab- and field-tested units are UL Type 12/3R/4 rated and Telcordia GR-487 capable. Maximum 2,000 W of heater option is available on dc and ac volt heaters, and...
Read More »Desiccant Cabinet dries MSL 5, 1.4 mm components in 24 hr.
Designed to exceed challenges associated with IPC J-STS-033B.1 for handling of moisture sensitive devices, Super Dry Model XSD 702 deploys self-regenerating desiccant, which is safe and virtually maintenance-free. U-5000 Zeolite drying unit achieves humidity levels under 0.5% RH which, combined with integrated heating system, combats oxidation. Featuring heavily insulated design, unit includes...
Read More »
Everything You Need to Know About Cold Chain/Temperature Controlled Packaging
This ebook provides an overview of everything you need to know about cold chain and temperature-controlled packaging.
Read More »Wheelabrator-® Preservation Line: An environmentally-sound solution to blasting and painting needs
Burlington, Ontario - (April 10, 2009) - In August 2006, the installation of a Wheelabrator-® Preservation Line complemented the new Delta Steel facility opening in Morgan City, Louisiana. As a provider of components for oil rig platform applications and large sheets of steel for the shipbuilding industry, Delta Steel uses the Wheelabrator Preservation Line blast and paint systems. This is used...
Read More »
Wet Blast System combines ecology, economy, effeciency.
Used for cleaning, finishing, descaling, and deburring, SS-10 uses scrubbing action that cleans and deburrs via solution of media, water, and compressed air. No chemicals or solvents are used, promoting worker and environmental safety. Manual system has 60 x 70 x 96 in. fiberglass cabinet with 50 x 50 in. door opening, and load end provides 68 X 65 in. area for parking 49 in. trolley-mounted...
Read More »
Wet Blast System operates without dust or strong chemicals.
Promoting sustainability and ecologically sound practices in manufacturing environments, ABS III can perform cleaning, deburring, and finishing capabilities in one step without any impact on environment. Design, which incorporates fluorescent lighting, non-corrosive cabinet, swing door, 20 in. dia turntable, and 2 hp slurry pump, promotes visibility. Functionality is promoted via...
Read More »Honeywell Developing Low-Global-Warming-Potential Liquid Blowing Agent for Foam Insulation
New blowing agent helps improve environmental performance of foam MAASTRICHT, Netherlands, March 31 -- Honeywell (NYSE:HON) announced today it is developing a new low-global-warming-potential blowing agent for energy-efficient polyurethane foam insulation. The announcement was made at the UTECH Europe conference and expo held in Maastricht, The Netherlands, where polyurethane industry leaders...
Read More »Shot Blast System cleans custom fabrications.
Suited for I-beams, bridge girders, and construction vehicle components, Work Car AUTOBLASTÃ-® System can achieve SP6 to SP10 blast finish. Parts or components are conveyed through blast chamber on work cars at varying line speeds. System removes rust and scale from custom fabrications with total of 8 heavy-duty EZEFITÃ-®12 bladed wheels. Blast cabinets, constructed from welded manganese...
Read More »
BRECOflex Co., L.L.C. - Metal Parts for Belt Drives
March 25, 2009 Timing Belt Pulleys - Flat Belt Pulleys - Idlers - Tensioners - Clamps - Tensioning Clamps Metal Parts made to order in less than 1 week !!! BRECOflex Co., L.L.C., the market leader in polyurethane timing belts, is proud to introduce a break through in regard to the lead time for Metal Parts for the timing belt industry. Made to order Timing Pulleys, flat Pulleys and Idlers, as...
Read More »
Triad's Next-Gen Power Supplies Offer Increased Reliability and Reduced Noise Performance
Triad Magnetics, an established leader in power supply design and manufacturing, is proud to announce their next generation WAU AC and WDU DC Series of power supplies. These linear wall plug-ins offer minimum noise performance without sacrificing reliability or life. See our video to learn more.
Read More »
