Material Processing

Exothermics Inc., Toledo, Ohio USA, Awarded Equipment Certificates by the United States Department of Agriculture for USDA Accepted Designs of Indirect Air Heater and Air to Air Heat Exchangers for the Dairy Industry
Heaters

Exothermics Inc., Toledo, Ohio USA, Awarded Equipment Certificates by the United States Department of Agriculture for USDA Accepted Designs of Indirect Air Heater and Air to Air Heat Exchangers for the Dairy Industry

Exothermics, a division of Eclipse Inc, has been given Equipment Acceptance Certificates for the Air-to-air Heat Exchanger Model SP-DA, and Indirect Air Heater, Model ER-DA for specific use on spray drying applications in the dairy industry. The Indirect Fired Air Heater provides clean heated air for the dryer and the air to air heat exchanger provides increased thermal efficiency through heat...

Read More »
Miscellaneous Processors

Dual Core Communications Processor targets LTE smartphones.

Based on Mobile modem with multi-mode FDD and TDD-LTE Category 4 capabilities, 1.5 GHz Model MP5232 enables OEMs to accelerate creation and delivery of high volume LTE/HSPA+ capable smartphones, tablets, and mobile Internet devices. Application processor provides multi-core computing power with optimized graphics, video, and imaging capabilities. Delivered fully tested and certified, chip also...

Read More »
Takreer Selects Zimpro Wet Air Oxidation System by Siemens for Refinery Spent Caustic Treatment
Aerators

Takreer Selects Zimpro Wet Air Oxidation System by Siemens for Refinery Spent Caustic Treatment

Siemens Industry Automation Division is providing Takreer (Abu Dhabi Oil Refining Co.) with a Zimpro wet air oxidation (WAO) system to treat refinery spent caustic as part of the company's expansion of its refinery in Ruwais, Abu Dhabi, UAE. One of the advanced technologies that will help TAKREER meet environmental regulations, the WAO system will treat odorous sulfides and produce biodegradable...

Read More »
Molds

Mold Building Solutions for Injection Molding

Injection mold building is an important part of plastics manufacturing and has various options in mold choice. The selection of mold type depends on the individual needs of the parts and the company. Here are some basics of injection mold building from some the most knowledgeable sources in the field. Master Unit Die (MUD) units MUD units offer some advantages when faced with injection mold...

Read More »
MMIC Amplifier features ultra low noise figure of 0.75 dB.
Electronic Amplifiers

MMIC Amplifier features ultra low noise figure of 0.75 dB.

Operating from 3-5 Vdc supply, surface mount Model PSA4-5043+ provides IP3 as high as 33 dBm, output power levels up to +21 dBm, and on-die ESD protection rated to over 500 V, making device suited for wide range of 50 MHz to 4 GHz applications. MAC Ceramic Hermetic Mixers, covering frequency range from 0.3-12 GHz, feature LO levels from 4-17 dBm. Devices deliver broadband performance suitable for...

Read More »
Triocorp Selects ROTOCONTROL RSC Slitter/Rewinder Finishing Machine
Slitters

Triocorp Selects ROTOCONTROL RSC Slitter/Rewinder Finishing Machine

Another order placed in South Africa by ROTOTEC, the local Agent for ROTOCONTROL Ahrensburg, Germany - ROTOCONTROL announced the receipt of another purchase order in South Africa from Triocorp Pty Ltd for an RSC Slitter/Rewinder 340mm web width Finishing Machine. Local installation and continuous support will be provided through ROTOTEC, the local Agent for ROTOCONTROL throughout South Africa....

Read More »
Foremost Machine Builders
Blenders

Foremost Machine Builders

Foremost Machine Builders Inc. of Fairfield NJ will be exibiting at the 2012 NPE show in Orlando Florida. Our booth number is 3263. To showcase our theme, One Source Does It All, Foremost will have four machinery displays in the booth. Foremost will display its model AT-4540-VII-ATVL gravimetric blender. This blender is a floor mounted four component unit mounted on a distribution box, and will...

Read More »
Maguire® Gravimetric Blender Reaches a New Milestone as the Number of Units Operating Worldwide Reaches 40,000
Blenders

Maguire® Gravimetric Blender Reaches a New Milestone as the Number of Units Operating Worldwide Reaches 40,000

Use of the Blender Continues to Grow Rapidly as New Markets Open DÃ-œSSELDORF, -The world's leading gravimetric dosing system for plastics processors is now 21 years old, but many more processors continue to discover the capabilities of the Maguire® Weigh Scale Blender (WSB) for cost savings, increases in productivity, and improvements in quality. At K 2010, Maguire Products, Inc....

Read More »
ATC Alignment Tool keeps spindle taper free from damage.
Aligners

ATC Alignment Tool keeps spindle taper free from damage.

By ensuring ATC gripper aligns tool with extreme precision, ATC Alignment Tool prevents collision and potential damage, extending machine tool, cutting tool, and tool holder life. Tool may also be used to align ATC gripper to magazine tool pockets. Unit has built-in stylus that determines high/low values when plug is slowly rotated. Values are displayed on 10 micron/div dial indicator and reveal...

Read More »
Laboratory Ribbon/Paddle Blender delivers gentle mixing.
Blenders

Laboratory Ribbon/Paddle Blender delivers gentle mixing.

Equipped with interchangeable double ribbon and paddle agitators, multipurpose 42NSD-1S has max working capacity of 1 cu-ft and suits laboratory- and pilot-scale blending requirements. Inner and outer helical ribbons are pitched to move material axially, in opposing directions, and also radially for accelerated, thorough blending. Installed along bottom of trough, discharge extruder assembly...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers