Material Processing Mills

Material Processing Mills

Fluid Jetmill handles 50-500 g batch sizes.

Interchangeable with MC One and MC 50, multipurpose Model MC2 is engineered for micronization of product with typical requested PSD between 0.1 and 20 microns and max starting raw material from 1 mm. System features tri-clover connections and is designed to minimize caking effect and blow-back phenomena. Various optional versions include cryogenic, isolated, LAF, fully automated, and Atex.

Read More »
Mill suits grinding of soils or frozen yeast cells.
Material Processing Mills

Mill suits grinding of soils or frozen yeast cells.

With volume up to 190 ml, Mortar Grinder RM 200 features setting of pestle pressure and scraper position, push fit mortar and pestle for exchange of grinding sets, as well as digital timer and load control display. It handles soft, hard, brittle, and pasty samples with particle size up to 8 mm, and grinds using pressure and friction for homogenization and mixing of sample. Unit has grinding sets...

Read More »
Material Processing Mills

Centrifugal Impact Mill finely grinds pharmaceuticals.

Able to handle wet or dry materials, 24 in. sanitary stainless steel Model CIM-24-SS grinds bulk pharmaceuticals and nutraceuticals into controlled particle sizes down to 325 mesh. Materials travel from center to periphery of discs, passing through 5 intermeshing rows of rotating and stationary pins. Desired tight particle size distribution is obtained by controlling rotor speed, which is...

Read More »
Material Processing Mills

Union Process Produces Special S-5 Attritor

Akron, Ohio. . .Union Process, known globally as a manufacturer of size reduction and dispersing equipment for research and industrial applications, has produced an S-5 Batch Attritor for a customer in the dental market. Prior to the purchase of the production-size S-5 Attritor, Union Process worked closely with the customer to develop their new product on a laboratory S-1 Attritor in the Union...

Read More »
Material Processing Mills

Wright's Flour Chooses Two Goring Kerr DSP3 Metal Detectors for State-of-the-Art Mill Based on Performance and Service Levels

Rugby, UK - September 19, 2006 - Thermo Electron Corporation (tel: 01788 820300), an industry-leading producer of analytical and process instrumentation, has recently installed two advanced Goring Kerr DSP3 metal detectors at Wright's Flour state-of-the-art mill located in Ponders End, London. The UK's leading manufacturer of bread mixes chose Thermo based on its existing working relationship,...

Read More »
Union Process Produces QL-100 Attritor for the Milling of Specialty Inks
Material Processing Mills

Union Process Produces QL-100 Attritor for the Milling of Specialty Inks

Akron, OH. . .Union Process, Inc., known globally as a manufacturer of size reduction and dispersing equipment for research and industrial applications, has produced three QL-100 Circulation Attritors for the milling of specialty inks. The QL-100 is the largest and newest model of the Union Process Q-Series Attritors and is specially designed with an ASME-coded vessel that will withstand 75 PSI....

Read More »
Jet Mill features stainless steel collection module.
Material Processing Mills

Jet Mill features stainless steel collection module.

Suited for biotechnology and pharmaceutical powder processing applications, 00 Jet-O-Mizer is available with High-Yield® Collection Module upgrade, which collects 98% of compounds processed during jet milling. Module is self-contained and operates pneumatically using same compressed air or gas that runs jet mill. Capable of processing batches from 1-50 g, collection container comes equipped...

Read More »
Material Processing Mills

Union Process Produces SDL-30 Batch Attritor for Grinding Under Liquid Nitrogen

Akron, Ohio. . .Union Process, known globally as a manufacturer of size reduction and dispersing equipment for research and industrial applications, has manufactured a custom model SDL-30 dry grinding batch Attritor for a customer producing desiccants (sorbents) for the food, pharmaceutical, medical/diagnostic and electronics industries. This SDL-30 Attritor has a special cover with a Teflon...

Read More »
Hammer Mill reduces friable and fibrous materials.
Material Processing Mills

Hammer Mill reduces friable and fibrous materials.

Utilizing centrifugal force, Model 141 reduces materials into uniform particle sizes from 20-300 mesh. Shaft, integral hammer discs, disc pins, and hammers are driven by 75 hp motor at 1,800-4,000 rpm, achieving hammer tip speeds from 8,700-19,500 fpm. Particle size is determined by size of screen perforations. In addition to lower 180° cylinder screen, unit features 90° screen...

Read More »
Disk Mill achieves grind sizes of 40-100 microns in seconds.
Material Processing Mills

Disk Mill achieves grind sizes of 40-100 microns in seconds.

Featuring 1.5 kW stabilized plane drive, RS 200 Vibratory Disk Mill grinds samples up to 250 ml with max particle feed size of less than 15 mm. Made of chrome steel, tungsten carbide, zirconium oxide, or agate, dust-tight grinding sets are contamination-free and neutral-to-analysis. Mill includes all-digital controls with memory for up to 10 grinding programs, automatic recognition, and speed...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers