K-Tron Process Group Exhibits Process Automation Equipment for Batch and Continuous Food Processing at Process Expo 2009, October 5-7, Las Vegas Convention Center, Las Vegas, NV, Booth S-6816
K-TRON PROCESS GROUP - (August 26, 2009)- announces exhibition at Process Expo 2009, October 5-7, at the Las Vegas Convention Center, booth S-6816 located in the upper south hall. Demos on display include: ActiFlow(TM) a new material flow aid that prevents bridging and rat-holing of cohesive materials in loss-in-weight feeder hoppers, K-Tron T35/S60 Quick Change feeder, Smart Weigh Belt feeder...
Read More »
Custom Fuel Tanks and Hydraulic Fluid Reservoirs Manufactured by IFH Group for Off-Road Vehicles
Rock Falls, IL, August 27, 2009 - The IFH Group (for Innovative Fluid Handling) is the largest manufacturer in the USA of custom steel fuel and hydraulic oil tanks for off-road and specialty vehicles. Applications include combines, heavy terrain fork lifts, earth boring equipment, boom cranes, grounds keeping equipment, end loaders and hay bailers. Fuel Tanks and Hydraulic Reservoirs range in...
Read More »
Appleton Mfg Division's AutoLoader Reduces Labor Costs
August 2009, Appleton, WI (Phone: 920-751-1555, Website: www.appletonmfg.com): Appleton Mfg Division's AutoLoader, in combination with the P510 Programmable Core Cutter or other Appleton core cutters, offers increased flexibility in automating efficiencies in the core cutting process. The AutoLoader reduces labor costs, while increasing productivity, by freeing up operator time from mundane tasks...
Read More »
New Robotic Integrated Dispense System Delivers Precision Bead Profiles
PLYMOUTH, MI - Sealant Equipment & Engineering, Inc.'s new Servo-Flo® 404-IDS dispensing system is incorporated into Motoman's Integrated Dispense System using their series MH or ES 6-axis robot. The Servo-Flo meter's servo drive, Yaskawa encoder and supply pump system controls are integrated into the Motoman control panel for a smaller footprint, lower system cost and one-stop operator control...
Read More »
A Definitive Guide to Air Gaps in Magnetic Separation Equipment
This guide discusses how air gaps affect magnetic separation applications.
Read More »
Style CC-XD Elevator Buckets come in four 7 in. sizes.
Available in polyethylene, nylon, and urethane, CC-XD (Xtreme Duty) buckets have prime virgin resins throughout entire bucket, not just critical wear points, to enhance durability/strength. Manufacturing molds used for 12 x 7, 13 x 7, 14 x 7, and 16 x 7 in. sizes ensure identical, consistent bucket profiles with no variance in critical specifications such as dimensions, proportions, and wall...
Read More »Stackable Chassis suit VIA EPIA boards.
Model VIA AMOS-1000 Mini-ITX Chassis contains VIA EPIA Mini-ITX board and 2.5 in. hard disk with DC-DC power board. It supports optical storage drive, Compact Flash slot, MiniPCI port, 2 additional SATA II drives, and riser expansion chassis. Designed for VIA EPIA Nano-ITX boards, VIA AMOS-2000 features customized front I/O panel and dual-sided I/O for wireless/COM/DV/USB support on rear panel....
Read More »
Vertical Lift is capable of moving 360 pallets/hr.
Equipped with 3-strand conveyor for transferring pallets on and off, Vertical Lift is capable of handling either 1 or 2 pallets simultaneously, with maximum vertical speed of 200 ft/min. It uses 2 gear motors mounted on floor level, mechanically linked with drive shaft and driven with AB PowerFlex 700 drive. Lift offers cycle time of 20 sec for 8 ft 9 in. travel distance, including time for...
Read More »
Fixed Jaw Gripper provides zero point part pick-up/placement.
Featuring height of 0.813 in., AGPS parallel gripper features 1-piece body and stationary jaw design, integrated with precision T-slot bearing design supported full length of body. It features aluminum base and carriage bearing manufactured from Ampco 18 aluminum-bronze. Providing grip force of 15-25 lb, mini-linear actuator gripper is offered with bore sizes of .5 and .75 in. available in .5,...
Read More »
Power Tug enables 1 person to move up to 5,000 lb.
Power Tug(TM) is pedestrian-operated pusher with telescopic front legs and mono-drive wheel design with stabilizing castors allowing smooth operation on uneven surfaces. Electric actuator enables adjustment of single or dual legs to various heights. System also includes automatic braking and emergency reverse and onboard battery charging. Its programmable control system with butterfly speed...
Read More »
Distribution Boxes offer variety of mounting options.
Featuring 30 mm double row design with inline assembly holes, Exact8 Distribution Boxes make it possible to connect maximum number of signals in small space. Units are available with molded cable, pluggable cap, or M12 cable connection, including connectors with open-ended wires, connection cables, and flange plug connectors. Eight-pole and 12-pole cables can be connected interchangeably.
Read More »
Von Ruden's Driven Tools Are Built to Last
Von Ruden's driven tools are designed to each specific machine in order to maximize performance. All of our tools are performance tested and made in the USA per ISO 9001:2015 standards. Check out our video to learn more.
Read More »
