Material Handling & Storage

Development Kit complies with PICMG 2.16 specification.
Backplanes

Development Kit complies with PICMG 2.16 specification.

PICMG® 2.16 Ethernet Packet Switching Development Kit consists of 9-slot tower with 8-slot PICMG 2.16 Ethernet Packet Switching backplane, which has mix of PICMG 2.16 node slots and standard CompactPCI slots. Kit includes provisions for CD ROM drive, hard drive and floppy drive; provisions for 80 mm rear plug-in modules and transition modules; embedded 300 W ATX power supply; and push/pull...

Read More »
Drum System lifts and discharges.
Handling Equipment

Drum System lifts and discharges.

Lift & Seal System elevates and discharges product from drums. Drums are loaded by gravity roller conveyor system. System has dust-tight seal preventing product loss or contamination, and safety caging with safety interlocked access doors to protect employees and equipment. Systems are available for any size or weight container with discharge heights up to 35 ft.

Read More »
Lift Trucks provide vibration-free power.
Equipment Forks

Lift Trucks provide vibration-free power.

Cat® 8,000-11,000 lb capacity lift trucks feature pneumatic tires, and are offered with gas, LP gas and diesel engine configurations. Cabs include contoured seats and flexible operator restraint systems as well as open-step frames. Tilt steering column is adjustable within a 12° range of motion. Other offerings include Hydrostatic steering system, pusher fan arrangement and fingertip...

Read More »
Reels stay together and keep products safe from damage.
Reels

Reels stay together and keep products safe from damage.

Dead Bolt reels feature stay-tight bolt assembly for safety. They are available in variety of sizes to accommodate nearly any type material, and come fully assembled or ready for assembly. Reels have tapered start holes and multiple tie-off holes to reduce material waste, and are available with optional water resistant cores. They can be stacked, making transport, material handling and storage...

Read More »
Distillation 101: A Guide to Distillation and Separation Technologies
Sponsored

Distillation 101: A Guide to Distillation and Separation Technologies

Distillation is a separation unit operation that involves multiple countercurrent-stage steps, separating two or more volatile components. This results in the contact of liquid and vapor most generally in counterflow. Distillation 101: A Guide to Distillation and Separation Technologies provides an in-depth look at everything you need to know about distillation, including: Design procedures Equipment components Applications

Read More »
Tool Lanyards comply with OSHA guidelines.
Tool Holders

Tool Lanyards comply with OSHA guidelines.

Miller® Bandit(TM) Tool Holder and Miller WristBandit Tool Holder prevent workers from dropping tools at heights. Miller Bandit Lanyard Tool Holder attaches to workers' waist belts while allowing freedom of movement. It is constructed of stretchable cord surrounded by nylon tubular webbing, and stretches from 26 to 43 in. Miller WristBandit Tool Holder attaches to workers' wrists using...

Read More »
Bulk Container accommodates double blade mixers.
Containers

Bulk Container accommodates double blade mixers.

All-plastic intermediate bulk container accommodates double blade mixers for mixing multiple ingredients and raw materials. It enables food, chemical and other processors to mix and blend inside bulk container, eliminating need to mix in processing vessel and transfer to another container for shipping. It handles products with up to 1.5 specific gravity, stacks 2-high when full and 3-high when...

Read More »
Oil Skimmer is corrosion-resistant.
Skimmers

Oil Skimmer is corrosion-resistant.

MAXI-Skimmer(TM) Model VSSP/4 belt skimmer is capable of lifting floating oil at variable rates from 1 to 20 gph. Stainless steel or polyurethane belts can reach down from 1 to 50 ft below skimmer. Construction includes stainless steel frame sides, top and wetted parts. Drive pulley bodies are glass-filled nylon, and scraper blade and frame ends are bearing grade UHMW polymer. Input voltage is...

Read More »
Floor Mount Box Support complies with ADA standards.
Electrical Boxes

Floor Mount Box Support complies with ADA standards.

Caddy® FMBS 16 Floor Mount Box Support positions electrical box centers 16 in. above the floor. It allows mounting of 4 in. or 4-11/16 in. boxes 1-1/2 or 2-1/8 in. deep. Plaster rings can be mounted for low voltage applications. Mountable inside (using mounting tabs) or under floor tracks, independent of wall stud location, FMBS 16 includes built-in far-side back support for 2-1/2, 3-1/2...

Read More »
Fluid Dispenser ensures critical deposit control.
Dispensers

Fluid Dispenser ensures critical deposit control.

Model 2000XL applies adhesives, epoxies and assembly fluids in amounts as small as 0.006 in. dia. It uses microprocessor circuitry to control amount of fluid applied. Teach function helps user determine correct amount of fluid to use for specific applications. Digital displays of all dispensing parameters provide process control. Up to 8 different deposit amounts can be stored in non-volatile...

Read More »
Wire Feeder operates at speeds from 50 to 780 ipm.
Materials Feeders

Wire Feeder operates at speeds from 50 to 780 ipm.

Model 714S bench style wire feeder features one tool-less, rotatable drive assembly and automatic run-in. Dual tension control provides independent drive roll pressure on front and back rolls, while trigger hold allows extended welds. 714S runs hard and cored wires from 0.023 to 1/8 in. dia at speeds from 50 to 780 ipm. Spool size capacity is 60 lb, and incorporates Posifeed(TM) four-drive-roll...

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics