New: Buy Now on Thomas and Pay Over Time with Credit Key   Learn More

Material Handling & Storage

DDHXA-75/100 Underground Puller comes with 3-speed gearbox.

DDHXA-75/100 Underground Puller comes with 3-speed gearbox.

Featuring BOSS air compressor, Duct Dawg Air DDHXA-75/100 Underground Puller can pull up to 7,500 or 10,000 lbs. Unit is hydraulically driven and controlled wirelessly. Product comes in 16 ft footprint and uses CANbus technology. Underground Puller is suitable for utilities and contractors and comes with a 3-axis boom. DDHXA-75/100 is equipped with twin capstan bullwheels.

Read More »
Folding Carboy Spill Stand comes with a spill containment tray.

Folding Carboy Spill Stand comes with a spill containment tray.

Folding Carboy Spill Stand is constructed of 3/8 in. high density polyethylene with corrosion resistant stainless steel hardware. Unit’s spill tray can hold carboys up to 15 in. in diameter. Device's containment tray comes with a 2 gal capacity. Product is equipped with bottom spill trough which holds up to 1/2 gal. Suitable for bench-top use, stand features 16 x 12 in. sliding tray.

Read More »
V-408 Linear Motor Stage is equipped with 3-phase linear motor drive.

V-408 Linear Motor Stage is equipped with 3-phase linear motor drive.

V-408 Linear Motor Stage is designed with high load capacity precision crossed roller elements with anti-creep cage assist. Delivering a velocity up to 1.5m/sec, unit’s linear encoder offers 10 nm resolution. V-408 is available in 1 in. and two in. models with 25mm and 50mm travel range and provides 20nm minimum incremental motion and geometric performance with 4µm straightness and flatness....

Read More »
PerfectPitch® Pipe Supporter meets IMC condensate pitch standards.

PerfectPitch® Pipe Supporter meets IMC condensate pitch standards.

PerfectPitch® Condensate Pipe Supporter is used for condensate and waste drain line pipe installations in attics, mechanical rooms and crawl spaces. Featuring adjustable stems from 8 in. tall stanchions with 1/8 in. incremental gear teeth, PerfectPitch’s starter kit consists of universal clamps that fit 1/2 in., 3/4 in., or 1 in. pipes. Unit’s integral ruler and gear teeth offer precise...

Read More »
MVG Modular Vacuum Gripper Series helps to reduce vacuum leakage.

MVG Modular Vacuum Gripper Series helps to reduce vacuum leakage.

MVG Modular Vacuum Gripper Series allows user to configure vacuum generators and gripping interfaces such as foam, suction cups (shapes, diameters, diverse materials). Unit allows operator to create multiple independent gripping zones and helps to increase vacuum level. Product’s multi-zoning is suitable for staggered gripping and releasing, handling objects of different formats or optimization...

Read More »
Heat Shrink Tunnel Features Emergency Auto-Lift to Protect Conveyors, Bottles from Overheating - Pack Expo Booth #S-5800

Heat Shrink Tunnel Features Emergency Auto-Lift to Protect Conveyors, Bottles from Overheating - Pack Expo Booth #S-5800

Pharmafill™ HT6B Heat Tunnel Automatically Rises Above Conveyor for Cooling Wall, NJ: The Pharmafill™ HT6B Heat Tunnel from packaging machinery manufacturer Deitz Co., Wall, NJ (www.Deitzco.com), features an optional Emergency Auto-Lift (EAL) that automatically raises the heat tunnel high above the conveyor in the event of a power failure and/or when the operator stops the conveyor by E-stop...

Read More »
COB LED Light Reel delivers light of 600 lumens.

COB LED Light Reel delivers light of 600 lumens.

Featuring chip-on-board technology, COB LED Light Reel is designed for automotive repair and service applications. Unit is UL-listed and is resistant to dropping, moisture and chemicals. Product is spring-powered and can be used inside the car, under the hood and dash. Integrated with automatic recoil, steel mounting bracket and adjustable cord stop, light reel can be mounted on wall, ceiling or...

Read More »
Lube Trolley Packages come with hose reel.

Lube Trolley Packages come with hose reel.

Lube Trolley Packages are used for dispensing oil or grease directly from 55 gal or 400 lb drums. Units are suitable for vehicles, industrial and machinery processes. Products are equipped with pneumatically operated pump for oil or grease, metering device, air control with filter/regulator/gauge, connection hoses and fittings. Trolley comes with a pivoting handle which allows users to attach it...

Read More »
Fluid Extractors/Dispensers come with rubber grip.

Fluid Extractors/Dispensers come with rubber grip.

Fluid Extractors/Dispensers are available in 616 and 617 models. Units come with 1.5-liter fluid reservoir, twist-valve and dual-seal piston and are used to transfer fluids. Featuring polymer-based construction and double-seal design, products are equipped with 16 in. hose, integrated stand and twist-valve on the hose end. Model 616 is suitable for fluid transfer from master cylinders, power...

Read More »
Dies & Stamping Services with Over 25 Years of Experience
Sponsored

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics