Material Handling & Storage

Vacuum Lifter uses oversize pads to grip tooling plate.

Vacuum Lifter uses oversize pads to grip tooling plate.

Heavy Duty Vacuum Lifters are equipped with rectangular vacuum pads that measure 19 x 34 in. each and provide 3,200 lb lifting capacity per pad. Featuring all-welded steel frames, lifters come models with 2-6 vacuum pads and are designed for continuous-duty applications. Products provide wobble-free lifting structure, and vacuum pads are made from steel with bolt-on nitrile seals or optional...

Read More »
Drum Discharging System offers dust-tight operation.

Drum Discharging System offers dust-tight operation.

Suited for handling non-free flowing powders, Drum Discharging System features fluidized stainless steel discharge cone, drum impactors, and custom dust take-off cowl. Control Link(TM) Rotation System enables 180° drum rotation, while Lift and Seal System(TM) facilitates dust-tight operation. Custom-designed for particular application, system aids in plant safety and promotes clean plant...

Read More »
Panel/Platform Carts offer versatile divider configurations.

Panel/Platform Carts offer versatile divider configurations.

Suited for transporting variety of products throughout warehouse, Panel/Platform Carts are available in 2 configurations, both with 3,000 lb capacity. Model VERSA-3060 is 30 x 60-¼ in. with platform height of 9 in. and overall height of 57-¾ in. with handles. Model VERSA-3672 is 36 x 72-¼ in. with 9 in. platform height and overall height 57-¾ in. with handles. Both carts include 5 sets of...

Read More »
Wire Roll Cart provides narrow aisle capabilities.

Wire Roll Cart provides narrow aisle capabilities.

Measuring 48 x 18 x 70 in. with 1,800 lb capacity, Model RC-148 is manufactured around 1-¼ in., 11-gauge square steel tube base and 1 in., 16-gauge round steel tube sides. It features 2 x 4 in. side mesh, 1-¼ x 4 in. base mesh, and nickel-chrome plated finish to prevent rust. Unit comes with 3 adjustable shelves, each with 200 lb capacity. More shelves can be added and placed as close as every...

Read More »

Sorters aid in product quality assurance.

Able to automatically detect and remove defects and foreign materials from product stream, Optyx® G6 3000 Series features modular vision engine and can be equipped with color, Vis/IR, and monochromatic cameras as well as Raptor Laser Technology. Modular unit employs HID illumination system and G6 CCD-based camera technology as well as icon-based GUI and 24 in. wide scan width. Infeed belt moves...

Read More »

Wire Feeder uses MaxTrac(TM) heavy-duty wire drive system.

Suited for MIG and metal- or flux-cored wire welding, LF-74 delivers positive arc starting and feeding with stainless steel and aluminum. Its 4-roll MaxTrac(TM) cast aluminum wire drive system delivers consistent feeding force. Accommodating 0.023-1/16 in. MIG wire diameters and .030-5/64 in. flux-cored wire diameters, unit offers feed speeds of 50-800 ipm. Split wire guides provide full support...

Read More »
Portable Hoist suits long reach projects.

Portable Hoist suits long reach projects.

New Yorker Portable Hoist attaches to scaffolding, I-beams, and trestle/monorails. With lifting capacity of 650 lb, unit can travel up to 350 ft at speeds to 80 fpm. Electrical controller has overloading sensing device that protects motor from damage caused by overwork or poor power supply, and non-rotating cable helps prevent loads from spinning while lifting and lowering objects. Suited for...

Read More »
Pallet-Changer System offers repeatability of ±0.0002 in.

Pallet-Changer System offers repeatability of ±0.0002 in.

Designed for use with RoboDrill machining center, RoboDrill PC-2 employs dual pallet system that allows part loading or fixture changes on one pallet while machining is under way on second pallet. Pallets, up to 27.5 x 15.3 in., accommodate load capacities to 220 lb, and pallet-change time is 6.3 sec. Suited for low- to medium-volume production of short cycle parts, unit can be used as fixture...

Read More »

GPS Receivers utilize proprietary ASIC.

With ability to simultaneously employ multiple front ends, Crescent(TM) GPS integrated circuit board receivers can achieve update rates as high as 20 Hz. Coast(TM) software enables receivers to utilize old differential GPS correction data for 40 min or more without significantly affecting accuracy of positioning. Optional e-Dif® and L-Dif® software enable differential-quality and...

Read More »
Cable Line Cleaner is offered with transport cart option.

Cable Line Cleaner is offered with transport cart option.

Ken-Way Junior model cable line cleaner can be transported via cart constructed with powder-coated, 16-gauge, -¾ in. tube steel frame. Accessory features 8 in. ball bearing wheels and stores 20 ft of power cord as well as foot control cord. Ergonomic to maneuver, cart employs mounting system that accepts Junior legs and fastens them securely with quick-pin attachment. System adapts to previous...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics