ABLE Machine Tool Takes 5-Axis CMM Technology On The Road With AMMO Wagon
DAYTON, Ohio—(March 5, 2018) With lead times shrinking and the demand for parts with multiple features and tighter tolerances growing, fabricators have little time to spare for new equipment demonstrations. Yet the need to find the right quality inspection equipment is higher than ever. That’s why ABLE Machine Tool Sales Inc., the New England distributor for Dayton, Ohio-based AIMS...
Read More »
New IntelLiDrives Circular Voice Coil Positioning Stage Features Cross Roller Bearing
IntelLiDrives Circular Voice Coil Positioning Stages (ICVCA) are designed with zero hysteresis and low electrical/mechanical constants. The stages come with low moving mass and integrated linear encoder. Offering stroke of 8 mm to 30 mm and force ranging from 50 N to 650 N, positing stages are suitable for applications where low ripple force and repeatability is required.
Read More »
New PT Series Container Tilters Allow Tilting of Load at Angle Between 0˚ and 85˚.
New PT Series Container Tilters are available in Non-Straddle and Straddle series configurations with capacities of 2,000 or 4,000 lb. The tilters are designed to work with wire baskets, plastic totes, and gaylords. Units are powered by 12V leak-proof battery with internal charger and come with 40 in. long forks. Tilters are controlled by pushbutton pendant and the foot operated floor lock allows...
Read More »
Rotolok's New Plug Feeder Meets FDA Standards
Plug Feeder is offered in range of sizes and provides a feed rate of up to 2 tonnes per hour. Unit is suitable for applications in bulk solids handling industry. The feeder comes with pneumatic or electric agitators, stainless steel construction and various hopper designs. Unit provides flexible equipment orientation and low running costs.
Read More »
Ergonomics Is Good Economics
While you don't need an MD to know that ergonomic designs are good for physical health, you probably didn't realize that these designs can actually be good for your economic health too.
Read More »
New Volvo FL Electric Trucks are Driven by 185 kW Electric Motor
Volvo FL Electric Trucks are designed for commercial applications such as urban distribution and refuse collections. Vehicle’s electric motor offers 130 kW continuous output, two speed transmission, max torque of 425 Nm and max torque rear axle 16 kNm. The truck is equipped with 2-6 lithium-ion batteries with capacity of up to 100–300 kWh. The truck comes with 16 tonnes GVW (Gross Vehicle...
Read More »
New Coaxial RF Probes and Probe Positioners are Suitable for Signal Integrity Verification
Coaxial RF Probes and RF PCB Probe Positioners from Pasternack are available in unique designs. RF coaxial probes feature gold-plated contacts, 3.5mm female interface and a pitch of 800 and 1500 micron. The probes are operated up to 20 GHz and offers return loss of less than 10 dB. RF PCB Probe Positioners come with magnetic mounting plate with on-off positioner switch. The units are designed for...
Read More »
New Single Load Arm Loader is Suitable for Aviation Fueling
New Single Load Arm Truck Loading Skid is available in 3 in. and 4 in. and delivers flow rates of up to 750 GPM. Units are equipped with strainer, dP gauge, flow meter, digital preset and control valve, RTD and ground/overfill monitor. The SLA’s can be ganged together for multi-lad arm capability and are suitable for small terminal or industrial market.
Read More »
Qosmedix's Silicone Applicators are Now Available in New Shapes and Styles
Silicone Applicators are offered in heart, teardrop and round shapes. The Heart Shaped Silicone applicator is available in Pink Hearts or Pink Sparkle colors whereas the teardrop applicators come in Black Sparkle or Clear with Pink Sparkle colors. The dual-sided teardrop applicator feature cotton flocked backing. The units can be washed with mild soap and warm water.
Read More »
New RX-V385 AV Receiver is Equipped with Proprietary YPAO™ Calibration Technology
RX-V385 AV Receiver comes with CINEMA DSP™ technology for support of Dolby® TrueHD and DTS-HD Master Audio™ HD audio options. YPAO™ calibration automatically adjusts audio parameters by analyzing room acoustics. Unit features built-in Bluetooth®, 4K Ultra HD video with HDCP 2.2, high dynamic range (HDR), BT.2020 compatibility and 5.1-channel amplifier design. RX-V385 is equipped with...
Read More »
RevX-E Eddy Current Separator from Eriez® is Designed for Separating Nonferrous Metals
RevX-E ECS offer direct drive for rotor and conveyor. Larger side panels, hood with adjustable splitter, and eccentrically mounted magnetic rotor within a non-conductive larger diameter shell are its prime features. Applications include ASR processing, purifying glass cullet and plastics, and nonferrous recovery from bottom ash. Units are available in three sizes (1-, 1.2-, and 1.5-meter widths)...
Read More »
New Davenport Hybrid Machine Offers Unique Flexibility for Parts Manufacturing
The Davenport Hybrid machine offers greater flexibility, easier set-ups, and faster cycle times. Check out the video to learn more.
Read More »
