Material Conditioners

Material Conditioners

Dry Baths measure 8.5 in. wide x 10 in. deep x 4 in. tall.

Capable of handling large variety of sample blocks, Model IC30 (-10°C to 100°C) and Model IC30XT (-20°C to 100°C) dry baths can freeze, chill, or heat 0.5-50 ml centrifuge tubes, 4-250 ml round-bottom flasks, test tubes, vials, and assay plates. Peltier-Driven IC30's have digital display and control to 1°C, 30-day countdown timer in hr/minutes/sec, data logger, and...

Read More »
Perma Pure Showcases Sample Conditioning Solutions at ISA Expo
Material Conditioners

Perma Pure Showcases Sample Conditioning Solutions at ISA Expo

Toms River, NJ (August 30, 2006) - Perma Pure LLC will exhibit its gas conditioning products at the Instrumentation, Systems and Automation Society (ISA) Expo 2006, booth number 2535. The company offers a full line of dryers, filters, and complete gas sampling systems for use in industrial and scientific applications. The Expo takes place October 17-19 at the Reliant Center, Houston Texas. With...

Read More »
Mini Gyratory Rocker has space-saving design.
Material Conditioners

Mini Gyratory Rocker has space-saving design.

Suited for use on bench or in incubators, SSM3 produces gentle 3D gyratory rocking action for low foaming agitation, DNA extractions, staining, and de-staining procedures. Its 3° to 12° angle of tilt can be moved to any position by hand to optimize mixing of vessels. Along with digital speed control, unit features built-in timer, 9.25 in.Â-² platform, and 5-70 rpm speed range....

Read More »
Flow Signal Conditioner provides 4-20 mA or 1-5 Vdc output.
Material Conditioners

Flow Signal Conditioner provides 4-20 mA or 1-5 Vdc output.

Offered with NEMA 4 (IP66) enclosure and CE approval, Model FLSC-45B dc powered frequency-to-analog output signal conditioner accepts low level magnetic pickup signal or high level dc pulse from flow paddlewheel sensor or turbine meter without amplification and converts it into analog output. It features ±0.15% of full scale accuracy, ambient operating temperature of 20-70°C, and...

Read More »
Material Conditioners

Gas Analysis Sampling System offers stack mounting option.

Housed in NEMA 4X rated enclosure, GASS(TM)-2040 prepares gas samples for analysis, removing acid mists, coalescable liquids, water, and particulates without altering concentrations of analyte gases such as CO, CO2, HCl, NOX, O2 and SO2. It processes samples containing 50% water at rates of up to 25 L/min, removing particulates as small as 1 Â-µm, and reducing water content to dew point of...

Read More »
Material Conditioners

Turbine Oil Conditioner can be scaled to requirements.

Turbo-TOC® KL Series prevents oxidation and viscosity breakdown that may compromise turbine lubricant effectiveness. Combining coalescing technology with electronic touch controls, systems utilize K1100 pre-filter, K2100 coalescer, and K3100 separator to remove harmful water, particulates, and other contaminants. Along with pump pressure, element differential pressure, and oil temperature...

Read More »
Dry Bath controls temperatures from -10 to +100°C.
Material Conditioners

Dry Bath controls temperatures from -10 to +100°C.

EchoTherm(TM) Model IC20 can freeze, chill, or heat samples in assay plates, centrifuge tubes, vials, and test tubes. Peltier driven unit measures 6.5 x 8.75 x 3.5 in. and comes with chiller/heater module, UPS, and ac line cord. It provides digital display and control of temperature to 1°C; count down timer in days, hours, minutes and seconds to 30 days; data logger; and RS232 interface....

Read More »
Flow Conditioner eliminates asymmetrical flow profiles.
Material Conditioners

Flow Conditioner eliminates asymmetrical flow profiles.

VOREL(TM) 90° Elbow Flow Conditioner optimizes pump performance by eliminating flow anomalies such as process media swirl associated with unconditioned, standard elbows. Flow stream enters pump in uniform and equally distributed pattern. Anti-swirl and inclined vortex-generating profile correction tabs, projecting from inside pipe surface, generate vortices that accelerate and amplify...

Read More »
Flow Conditioner guards analyzers from liquid damage.
Material Conditioners

Flow Conditioner guards analyzers from liquid damage.

Able to remove liquids and particulates during gas sampling operations, stainless steel Guardian combines Automatic Liquid Shut-Off and Liquid Eliminator. Gas sample enters concavity where free liquids and aerosols are flushed through bottom and drained off, while conditioned gas flows through membrane separator to analyzer. Compact unit measures 2Â-¼ x 4½ in., and installs into...

Read More »
Sample Conditioning Modules provide single-point sampling.
Material Conditioners

Sample Conditioning Modules provide single-point sampling.

Series 3100 provides tool for lowering temperature and pressure of single samples in power plants and boiler rooms. Units handle sample conditions up to 5,000 psig at 1,000°F. Sample flows up to 1,500 cc/min and beyond are capable of being cooled to within degrees of cooling water temperature due to high-efficiency coolers. Carbon-steel or optional stainless-steel backplate allows for...

Read More »
Dies & Stamping Services with Over 25 Years of Experience
Sponsored

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers