Manufacturing Equipment

Manufacturing Equipment

PCB Magazine Handlers feature graphical operation console.

Available in loader, unloader, and combined module, Models BHL-04 and BHU-04 replace pneumatic piston with electric telescope push-in, cutting overall length by Â-½ m. Loaders and unloaders can be integrated into any production line via SMEMA interface, while combined module is suitable for fully automatic batch solutions such as independent printing cells that serve multiple assembly lines....

Read More »
Manufacturing Equipment

DEK Partners with OKI to Introduce Breakthrough Technologies at First Advanced SMT Processes and Applications Seminar in Chengdu

DEK, the world's leading mass imaging equipment supplier, introduced two breakthrough technologies, ProActiv and Nano-ProTek stencil coating, to customers in Chengdu last week. These latest cutting-edge technologies and application processes, in addition to LGA/QFN rework, were presented at the first Advanced SMT Processes and Applications Seminar 2011 in Chengdu. The rapid development of the...

Read More »
Surface Treatment Equipment

Plasma Treatment System optimizes PCB yield.

Designed for manufacturing high density interconnect, flex, and rigid panels, ProVIA(TM) requires minimal floor space. Vacuum system, plasma chamber, control electronics, and 40 kHz power supply are housed in single enclosure. Full front and rear access allows for service to all interior components, and no side access is required. Pump is positioned on rollers to facilitate removal.

Read More »
Machine Routers

Flexible PCB Drill/Rout Machine has dual-spindle design.

Intended for small-to-medium lot production as well as prototyping, Micronic 82flex is configurable with 2 drill spindles, 2 rout spindles, or one of each. Options include 125,000 rpm drill/route spindles and 180,000, 200,000, and 250,000 rpm drill spindles; latter is optimized for holes down to .0003 in. dia. Motion system uses linear motors in all 3 axes, and axis positioning accuracy is better...

Read More »
Stencil Printing System optimizes paste transfer efficiency.
Manufacturing Equipment

Stencil Printing System optimizes paste transfer efficiency.

ProActiv enables printing of standard and next generation components using conventional printing process with single thickness stencil. System includes control subsystem and set of squeegees with embedded electronics. When activated, unit energizes paste that is in contact with or in proximity to squeegee blade, optimizing packing density of solder particles into apertures and enhancing bond...

Read More »
Excel Completes Turnkey Pallet Inspection & Repair Handling System for Chep Grangemouth
Material Handling Equipment

Excel Completes Turnkey Pallet Inspection & Repair Handling System for Chep Grangemouth

CHEP, the global leader in pallet pooling, sub-contracts a number of its UK pallet conditioning facilities to partners such as Unit Pallets Ltd (UPL). Working together CHEP and UPL have recently completed the build of a brand new 1500m2 facility in Grangemouth, Scotland. The Grangemouth plant, which opened in June 2009, is the first CHEP plant in Scotland operated by UPL with capacity for...

Read More »
HumiSeal Introduces RemUVa(TM), a Conformal Coating Removal System for the European Market
Coating Equipment

HumiSeal Introduces RemUVa(TM), a Conformal Coating Removal System for the European Market

Leading manufacturer of conformal coatings solutions, HumiSeal has announced the introduction of the RemUVa(TM), a machine designed to effectively and safely remove the most robust coatings from finished assemblies. Visitors to stand A4:425 can see the RemUVa(TM), which has a fully configurable nozzle to allow working on smaller intricate areas or removal of coating across a larger area with full...

Read More »
Low Cost Nibbler for Singulating Tab Routed Boards
Nibblers

Low Cost Nibbler for Singulating Tab Routed Boards

Singulating tab routed printed circuit cards in low to medium volume production quantities is safe and easy with the N100 Nibbler from FKN Systek. Blades are available in standard thicknesses of .120 , .093" and .062". Custom sizes to match the width of the routed section can be ground. Tabs are cut cleanly on each side so that no further clean up is required to remove excess material, as is...

Read More »
Tools for Singulating Tab Routed PCB Panels
Manufacturing Equipment

Tools for Singulating Tab Routed PCB Panels

Video of the N200 punch shows separation of round and odd shaped panels without dust. Tab routed PCBs come in many shapes and sizes. Choosing the right tool for singulating these types of panels means matching the panel type and production quantites to the capacity of the equipment. Now you can check out videos showing the different tools and how they operate, at fknsystek.com. See whether...

Read More »
Manufacturing Equipment

In-Line Connector Seating Machine offers 6 ton capacity.

Using PCB handling capability of P300 Pin Insertion Machine, Model C300 integrates force distance monitoring to provide optimal seating process. Traceability feature couples barcode of PCB with force distance curve of each pressed connector and barcode of connector packaging. Suited for automotive connectors with press-fit technology, machine is available with barcode reader on input transfer...

Read More »
Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life
Sponsored

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.

Read More »

All Topics