Manifolds

Valve Manifolds are Ethernet-enabled.
Manifolds

Valve Manifolds are Ethernet-enabled.

Featuring plug and work® design, CPX I/O System consists of modular, IP65 valve manifolds with Ethernet/IP, Modbus TCP, and standard IT protocols. Embedded controller enables decentralized or stand-alone control. Complete diagnostics, via LED, network, or handheld, provide error detection. Featuring up to 32 solenoids, VTSA manifold offers flow rate up to 1,000 l/min per valve, while MPA...

Read More »
Filter Manifold suits harsh powder processing applications.
Manifolds

Filter Manifold suits harsh powder processing applications.

ValvePAC(TM) provides intelligent pulse jet filter cleaning as well as valve diagnostics for reducing pulse jet baghouse and cartridge style dust collector maintenance. Operating as standalone device or networked to B-PAC(TM) control systems for overall performance analysis and optimized control, ValvePACs are available in modular packages to handle small filters with 16 rows or less and large...

Read More »
Valve Manifold Assembly suits car care applications.
Manifolds

Valve Manifold Assembly suits car care applications.

Supplied with ready-to-install fittings, direct-acting manifold contains 2-way, NC valves with common inlet port and individual outlet ports. Metering options permit chemical dispensing or slow closure of valves to remove water hammer effects within water lines. Available in brass and 303 stainless steel, manifold is manufactured with Â-¼ in. NPT connections and offers 120/60 Class F IP67 AC...

Read More »
Gas Manifold System allows for uninterrupted gas flow.
Manifolds

Gas Manifold System allows for uninterrupted gas flow.

Available for 15, 40, or 125 psi outlet pressures, Gas Manifold and Automatic Changeover Regulator System features chrome-plated 2.5 in. gauges that enable visual inspection of cylinder bank and outlet pressures. Nickel-plated changeover regulator includes 2 inlet, 1 interstage, and 1 outlet pressure gauge. Pigtail assemblies made of SS and Teflon® are offered in 24 and 72 in. lengths, and...

Read More »
Manifolds

Fluoropolymer Manifold is made to application requirements.

Resistant to corrosion and heat in aggressive chemistry applications, custom-made Perfluoroalkoxy manifolds are constructed of translucent material that combines properties of PTFE and FEP and permits viewing of fluidic channel. Multi-layer design utilizes bonding process that allows internal fluid paths which minimize connections and solution volumes while eliminating leak points. Manifolds can...

Read More »
Valves

Modular Valve Terminal mounts up to 16 valves, 32 coils.

Offering range of pneumatic connections, VTSA (Type 44) allows plug-in sub-base style valves to be added or removed as required; singlar sub-base for mounting individual valve is also available. Sub-bases are available in G or NPT ports, and terminal box, multipin, and fieldbus electrical interfaces can drive 32 solenoids. Along with 24 Vdc and 100 Vac coil voltage options, system lets user...

Read More »
Modular Manifold offers infinite expanability.
Manifolds

Modular Manifold offers infinite expanability.

Micad Modular Manifold provides universal application for transferring fluids in and out of engines and tanks as well as through pumps. Intended for use by marine mechanics or those needing configurable fluids transfer device, product features infinite expandability. It is equipped with 2.5 x 3.5 in. dia port units and 1 x 3.5 in. dia end units. Connections are Â-½, ¾, and 1 in. NPT.

Read More »
Manifolds

Pneumatic Valve Islands are compatible with distributed I/O.

Featuring M23 19-pin connector, Series VS18/VS26 addresses CNOMO standard E03.62.530.N within European automotive industry. Metal connector is suitable for 24 Vdc and 115 Vac valve islands and multi-pole valve islands with M23 connector. Compatibility with FD67 fieldbus I/O system enables direct control of islands from FD67 nodes as part of distributed system. Sandwich plates with additional...

Read More »
Acrylic Sub Plates simplify fluid system design.
Manifolds

Acrylic Sub Plates simplify fluid system design.

KIP series facilitate design and installation of complex media flow requirements. Use of acrylic base permits flow of various media through single base using multiple inlets and outlets. For design flexibility, flow paths can be varied and directed to match specific design requirements.

Read More »
Gas Distribution Manifold offers gas withdrawal or venting.
Manifolds

Gas Distribution Manifold offers gas withdrawal or venting.

Designed for 600 Series switchover/623 delivery systems, Series 629 is made of 9 in. brass bar stock with 24-72 in. Teflon® or stainless lined hoses. Configured as gas manifold with Â-½ in. ID flow path, system facilitates flow from liquid cans or high-pressure cylinders to pressure control device. Configured as vent manifold, it provides headspace equalization for multiple liquid...

Read More »
Sponsored

Simple Connection MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.

Read More »

All Topics