Manifolds

VHS Injection Manifold Mount System is customizable.
Valves

VHS Injection Manifold Mount System is customizable.

Available with 1-, 2-, 3-, and 4-place standard manifolds, Lee VHS Injection Manifold Mount System allows for precise injection of fluid into flow stream. Any ported VHS micro-dispense valve can be mounted so that outlet port is in close proximity to flow stream, minimizing captive capillary volume and increasing injected volume. To allow for future expansion and design flexibility, boss plugs...

Read More »
Ball Valves

Parker Gains TUV TA-Luft Approval for Wide Range of Valve Types - Helps Process Industry Comply with Latest Environmental Legislation

o Compliance with German fugitive emission standard provides key competitive advantage for process system designers o Including ball valves, needle valves and double block and bleed valves Barnstaple, UK, May 21, 2009- Following a recent audit by approvals agency TUV Mannheim Sud, the Instrumentation Products Division of Parker Hannifin - the global leader in motion and control technologies - has...

Read More »
Valves

Compact Valve offers high flow, Preferred Connectivity.

Available with all valves, fittings, and mufflers, Isys Micro manifold is designed using back-to-back valve mounting style with 42 mm wide manifold that holds 4 valves and offers 0.35 Cv flow. It is Fieldbus-ready for centralized/decentralized applications and offers Preferred Connectivity to Rockwell Logix(TM) Architecture. With Isysnet Fieldbus, product can provide full 256 I/O capacity. It...

Read More »
Check Valves

Tideflex Mixing System Eliminates Stagnation in Potable Water Tanks

(CARNEGIE, PA - November 18, 2008) Many potable water tanks or reservoirs depend on a typical common inlet/outlet to maintain drinking water quality. This system often proves inadequate when water outside the common inlet/outlet area of influence becomes stagnant, creating dead spots where bacteria are likely to multiply. Tideflex Technologies' Tideflex® Mixing System (TMS) greatly improves...

Read More »
Injection Manifold Mount System has pressures up to 120 psi.
Manifolds

Injection Manifold Mount System has pressures up to 120 psi.

Featuring captive capillary volume of 0.5 Â-µL, Injection Manifold Mount System enables precise injection of fluid into flow stream. Any ported VHS micro-dispense solenoid valve can be mounted so that outlet port is in close proximity to flow stream, ensuring minimal captive capillary volume and increased injected volume repeatability. Available in 1, 2, 3, and 4-place standard...

Read More »
Humphrey Develops Custom Valve Manifold Assembly for High Performance
Manifolds

Humphrey Develops Custom Valve Manifold Assembly for High Performance

Humphrey Products company has developed a custom valve manifold assembly with virtually zero leakage for a customer who designs and manufactures high performance pressure and vacuum decay leak testing instruments used in production applications. The units are designed to detect pressure changes to 0.00001 PSI, then calculate the leak rate. Selected manifold assemblies were subjected to 200,000...

Read More »
Valves are available with single-/multi-station manifolds.
Cartridge Valves

Valves are available with single-/multi-station manifolds.

Electronic Oxygen Clean series is available with single- and multi-station manifolds, which offer single- or double-sided mounting in oxygen-compatible electroless nickel-plated brass material and feature 1/8 in. NPT input ports as well as No. 10-32 outlets. Consuming 0.67 W, pneumatic Oxygen series has response time of 5-10 msec and ratings of 6, 12, or 24 Vdc. Available in 1-12 station...

Read More »
Manifolds accommodate both 3- and 4-way valves.
Manifolds

Manifolds accommodate both 3- and 4-way valves.

Available in 2, 4, 6, 8, or 12 station lengths, 410M Series accommodates 310/410 Series inline pneumatic valves. Units contain one common media supply port, one common vent/exhaust port, and isolator plugs that permit isolation of galleys for separation of pressure, media, or exhaust. Other accessories include manifold station block-off plates, separate air supply plate, electrical sockets, valve...

Read More »
Manifolds

James C. White Company Releases Three Categories of Liquid/Air Manifolds

Greenville, SC -March 12, 2008- The James C. White Company, Inc. is re-releasing Unit-Header® manifolds for air, liquid, and gas after selling them by word-of-mouth alone for twenty years. Unit Headers are one-piece manifolds manufactured from aluminum extrusions, can have one or two tap lines, and are capable of a working pressure of up to 150 psi. The revamped Unit Header product line...

Read More »
Manifolds install for in-line use.
Manifolds

Manifolds install for in-line use.

Constructed of aluminum, in-line manifolds are designed with bottom T-slot that allows for accelerated and secure installation. Products are available in 4-, 6-, 8- or 10-station versions. Design provides access for grouping valves, fittings, or other pneumatic components.

Read More »

All Topics