Manifolds

Acrylic Sub Plates simplify fluid system design.
Manifolds

Acrylic Sub Plates simplify fluid system design.

KIP series facilitate design and installation of complex media flow requirements. Use of acrylic base permits flow of various media through single base using multiple inlets and outlets. For design flexibility, flow paths can be varied and directed to match specific design requirements.

Read More »
Gas Distribution Manifold offers gas withdrawal or venting.
Manifolds

Gas Distribution Manifold offers gas withdrawal or venting.

Designed for 600 Series switchover/623 delivery systems, Series 629 is made of 9 in. brass bar stock with 24-72 in. Teflon® or stainless lined hoses. Configured as gas manifold with Â-½ in. ID flow path, system facilitates flow from liquid cans or high-pressure cylinders to pressure control device. Configured as vent manifold, it provides headspace equalization for multiple liquid...

Read More »
Manifolds

Manifold uses dual transducers for online monitoring.

Designed for low-flow point-of-use CMP applications, Solaris® DVP Dual Transducer Manifold uses disposable methods of reducing defect-causing particles, gels, and agglomerates while simultaneously allowing critical working particles to pass through and reach wafer. It offers clean, safe filter changeout in seconds without use of tools and integrates upstream and downstream pressure...

Read More »
Modular Manifolds facilitate media distribution.
Manifolds

Modular Manifolds facilitate media distribution.

Suited for fluid and gas piping systems, co-ax® Modular Manifolds allow combination of multiple valves into single flow control system. Valves of different sizes, flow rates, and functions can be combined to enable distribution of process fluid or gas to multiple points, with each valve module connected to common inlet manifold. Separation plates make it possible to use same manifold to...

Read More »
Manifold System includes flow meter with 1-20 gpm range.
Flowmeter Components

Manifold System includes flow meter with 1-20 gpm range.

To replace outdated mechanical flow meters in paint mix rooms, Flow Meter and Manifold System adapts to current paint recirculation and transfer systems. Unit, constructed of 316 stainless steel, features JVM-60CG flow meter, RT-Ex2 battery-powered digital display, and Â-¼ in. NPT adapter for pressure gage. Unit also comes with 3 full port ball valves with complete bypass system and...

Read More »
Flow Monitor/Manifold targets paint mix rooms.
Flow Monitors

Flow Monitor/Manifold targets paint mix rooms.

Stainless steel Model JVM-60CG with RT-Ex display and manifold is designed to replace outdated mechanical flow meters used in paint mix rooms. With optional 4-20 mA upgrade, all flow rate information is relayed to PLC for monitoring of possible no flow or high flow conditions. Manifold has 3 full port ball valves, tri-clamp connectors with Teflon® O-rings, and threaded port for pressure...

Read More »
Manifold provides custom-configurable plumbing solution.
Manifolds

Manifold provides custom-configurable plumbing solution.

Grand Slam Manifold(TM) manages separate flow requirements of plumbing applications such as hot water distribution, water pressure stability, and water distribution. Utilizing Push 'N Go(TM) quick-connect technology with integral quarter turn valves and PEX piping, product supports in-field customization and facilitates installation. Infinitely variable, add-on modular platform can be...

Read More »
Remote-Mount Manifold can be actuated in tight spaces.
Manifolds

Remote-Mount Manifold can be actuated in tight spaces.

Constructed of 316 stainless steel, compact unit features angled vent valve that facilitates actuation, even when 2-valve manifold is panel-mounted. Non-rotating, hardened needle design minimizes seal wear, protects seat from galling, and promotes leak-tight shutoff. Cold-rolled stem threads, isolated from system media, are protected from dirt and dust by stainless steel shroud. Unit handles...

Read More »
Low Pressure Manifolds come in 9-port versions.
Manifolds

Low Pressure Manifolds come in 9-port versions.

Featuring Â-¼-28 flat-bottom ports, manifolds are available in models for 1/16 and 1/8 in. OD tubing. Used with included Super Flangeless(TM) fittings, 1/16 in. OD version will withstand up to 5,000 psi and 1/8 in. OD version will withstand up to 1,000 psi. Units are suited for splitting flow streams in 8 directions, such as infusion onto 96-well plate.

Read More »
High Low Manifold Systems control water temperature.
Controls and Controllers

High Low Manifold Systems control water temperature.

Models TM-420, TM-520, TM-820, TM-920, TM-1520A, and TM-2020A adjust to varying flow requirements for tempered water in industrial facilities. They feature DURA-trol® solid bimetal elements, integral supply checkstops, wall supports, cast lever handles, and locked temperature regulators. Products are offered from Â-¾ in. inlet with 1 in. outlet and flow rates from 1.0-35 gpm to 2 in....

Read More »

All Topics