Machining Heads

Machining Heads

New Live Tooling on Display at IMTS

Wheeling, IL- SMW Autoblok will display a new line of Live Tooling at IMTS in Booth E-2207. This complete line of live tools provides increased machine utilization of turning centers resulting in more parts per hour. Standard tooling models feature straight, angle or dual heads and are in stock to fit most popular OEM Turning Centers with motorized turrets. Like all their workholding products,...

Read More »
Machining Heads

Cogsdill Will Exhibit Hole-Finishing Tools at IMTS 2006

CAMDEN, SOUTH CAROLINA (April 18, 2006)Cogsdill Tool Products, Inc. will exhibit their complete line of hole-finishing tools at IMTS 2006 in booth #E-2013. Products on display will include burnishing tools and machines; mechanical hole-deburring tools; Shefcut precision reaming and boring tools; brazed diamond reaming and boring tools; automatic recessing tools, generating heads, and precision...

Read More »
Boring Heads offer sub-micron adjusting resolution.
Machining Heads

Boring Heads offer sub-micron adjusting resolution.

Offered in 6 models for boring range of .787-3.94 in., Sub-micron Boring Heads offer play-free tool carrier to direct diameter adjustment accuracy of 0.001 mm/div. Inch graduated heads will adjust 0.00005 in./div on diameter. Flexibility of KA connection permits wide range of spindle interface requirements. Integrated counterweight can be adjusted to any bore diameter by separate scale to permit...

Read More »
Angle Heads create additional Z+ axis for CNC machining.
Machining Heads

Angle Heads create additional Z+ axis for CNC machining.

Equipping VMC or HMC with KOMA Z+ Angle Heads minimizes fixturing and setup requirements, optimizing part accuracy and machine throughput. Units are available with 90° and dual 90° outputs, custom fixed angle outputs, and adjustable angle outputs. Heavy-duty flange-mounted heads and application specific custom heads are also available. Internal coolant, HSK shanks, and HT tooling...

Read More »
Boring Heads are offered with chamfer rings.
Machining Heads

Boring Heads are offered with chamfer rings.

Small-diameter boring tools of 112 series are available with chamfer rings for sequence chamfers on bore diameters from .496-1.248 in. Existing tools can be retrofitted to perform additional fixed 45° chamfer in same boring operation. Chamfer ring slides over boring bar and locks into place with one screw. Made from aluminum, rings are designed for 12 mm and .625 in. dia boring bars and...

Read More »
Boring Tools deliver sub-micron adjustment resolution.
Machining Heads

Boring Tools deliver sub-micron adjustment resolution.

Kaiser sub-micron series boring tools offer play-free tool carrier for direct diameter adjustment accuracy of 0.00005 in./div. on diameter. Carrier locking system provides precise repeatability, even under high speed or interrupted cutting. Six boring heads are available for boring in range of .787-3.94 in. and can be used with wide range of spindles. Integrated counterweight can be adjusted to...

Read More »
Machining Heads

Boring Heads have compact, integral-shank design.

Available for CAT40, BT40, HSK-A63, and Capto C6 size spindles, EW2-50XL boring heads provide shorter tool than modular shank/boring head combination (1.3 in. shorter on CAT40 taper). Products may be used with existing center-mounted boring bars with 0.078-2.125 in. dia and side-mounted insert holders with 3.15-6.00 in. dia. Precision finish boring is possible via adjustment dial that displays...

Read More »
Thread Rolling Heads feature quick-change shanks.
Machining Heads

Thread Rolling Heads feature quick-change shanks.

Quick-change shank allows Axial Thread Rolling Head to go from installation in screw machine to CNC lathe and to CNC machining center. Shanks are compatible with VDI, HSK, CAT-V, and straight shanks. For work on multitude of machines, rolling heads can be equipped with designated shank, or single shank can be provided for several rolling heads.

Read More »
Thread Rolling Heads have pre-synchronized design.
Machining Heads

Thread Rolling Heads have pre-synchronized design.

Offered in T120F, T160F, T220F and T350F models, Tangential Thread Rolling Heads set up with no roll timing and feature 10 min thread roll changeout. Symmetrical roller repositioning is performed with central setting screw, away from rolling system. Accommodating thread diameters from 5/64-2 in., products allow for adjustment from coarse to fine and extra fine pitch threads. Heads feature carbide...

Read More »
Orbital Forming Head has no-maintenance design.
Machining Heads

Orbital Forming Head has no-maintenance design.

With life expectancy measured in years, Gold Series incorporates stack of angular contact bearings as primary forming element, increasing allowable thrust load. Able to handle short/long cycles, hard materials, and multiple production shifts, product features .005 in. runout accuracy and lubed-for-life bearings. It is suited for jobs that require additional capacity in smaller envelope, such as...

Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
Sponsored

Dodge® Raptor Coupling Now Available in Three Larger Sizes

The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.

Read More »

All Topics