Machining Heads

Big Kaiser Showcases the Newest in Tooling Solutions at Westec Booth #2632
Machining Heads

Big Kaiser Showcases the Newest in Tooling Solutions at Westec Booth #2632

January 16, 2009 Elk Grove Village, IL - BIG Kaiser Precision Tooling Inc. will showcase a number of new and exciting products at Westec 2009. Visit BIG Kaiser at Booth #2632 to see what's new from BIG Daishowa, Kaiser, Sphinx, Speroni, Unilock and more. BIG Kaiser's EWB-UP (Ultra Precision) Finish Boring Head is a revolutionary new series of Kaiser boring tools with the distinction of the finest...

Read More »
Tapping Head facilitates tapping of small holes up to ½ in.
Machining Heads

Tapping Head facilitates tapping of small holes up to ½ in.

Compatible with any small CNC using R8 or MT3 taper, Tension/Compression Tapping Head model PN 31163 includes tapping chuck and nine quick-change collets. It is compatible with ANSI-compliant inch (#0-Â-½ in.) and metric (M1.6-12) taps and has ¾ in. of float built in to maintain coordination of spindle speed and feed rate. Tool works seamlessly with PCNC 1100 mill, and can also be...

Read More »
Angle Head allows 90-deg cutting inside small bores.
Machining Heads

Angle Head allows 90-deg cutting inside small bores.

Available in CAT40/50 and BT40/50 tapers with BIG-PLUS dual contact interface and clamping range of .118-.236 in., Slender Drive Angle Head combines operations on one machine, eliminating potential for error created by multiple setups. Unit offers max speed of 2,000 rpm and is designed for drilling and light milling operations. Slender Drive is equipped with hardened and ground bevel and spur...

Read More »
Hi-Torque Angle Head 5-to-l Gear Ratio
Machining Heads

Hi-Torque Angle Head 5-to-l Gear Ratio

Coolant Driven Angle Heads develop up to l00 inch pounds of torque. The heads incorporate a planetary gear with a five-to-one ratio, ideal for applications where high torque at lower speeds is required. The angle heads are powered by an integral positive displacement ball piston motor driven by the machining centers higp pressure coolant system. Because spindle rotation is not required for power,...

Read More »
Faster Production and Lower Costs with Tube Sheet Pro® Grooving Tool
Machining Heads

Faster Production and Lower Costs with Tube Sheet Pro® Grooving Tool

Time-consuming fixturing and secondary operations are eliminated as groove quality is improved A manufacturer of heat exchangers was drilling, reaming, and grooving holes in tube sheets on a vertical CNC mill. The grooving tool in use wouldn't work properly on the CNC machine, due to slight variations in the surface height of the tube sheets. The tube sheets had to be taken to a radial arm drill...

Read More »
Special Twin Coin Punch Tool Achieves Chamfer Diameter and Location Specs, Greatly Reduces Costs
Machining Heads

Special Twin Coin Punch Tool Achieves Chamfer Diameter and Location Specs, Greatly Reduces Costs

Special tool based on Cogsdill recessing head design used a coining arbor to punch the hole and chamfer in the bottom of the reservoir in their master cylinders. The tool fed into the bore and then was offset, which caused the punch to make contact with the surface. They could only manufacture one punched hole at a time. The method by which the tool was offset caused deflection problems,...

Read More »
Visit BIG Kaiser at IMTS Booth F-2114 to See the Newest in Precision Tooling
Machining Heads

Visit BIG Kaiser at IMTS Booth F-2114 to See the Newest in Precision Tooling

Elk Grove Village, IL - BIG Kaiser Precision Tooling Inc. will showcase a number of product lines at IMTS 2008. Visit BIG Kaiser in the brand new West Hall at Booth F-2114 to see the newest in precision tooling from BIG Daishowa, Kaiser, Speroni, Sphinx, Unilock and more. BIG Kaiser's new EWN Digital Boring Head offers diameter adjustments of 1 micron that can be easily seen on a high-contrast...

Read More »
Machining Heads

Programmable Head attaches to 3-axis CNC milling centers.

With Model 5414, any 3-axis CNC machine can be converted to provide simultaneous 5-axis machining and drilling capability. Head attachment utilizes A2 tool steel in drive block and main bevel gears, and 17-4 stainless steel in spindle and worm gear housing. Inpro spindle seal virtually eliminates potential spindle contamination. Offering 20-40 K rpm, high-speed spindle options are achieved...

Read More »
BIG Kaiser Showcases the Newest in Precision Tooling at Eastec Booth #5244
Machining Heads

BIG Kaiser Showcases the Newest in Precision Tooling at Eastec Booth #5244

February 28, 2008 Elk Grove Village, IL - BIG Kaiser Precision Tooling Inc. will showcase a number of tooling product lines at Eastec 2008. Visit BIG Kaiser at Booth #5244 to see what's new from BIG Daishowa, Kaiser, Sphinx, Speroni, Unilock and more. BIG Kaiser's new Straight Shank FCR is designed for greater DOC and lower cutting resistance. Its geometry expands capabilities in multi-functional...

Read More »
Machining Heads

BIG Kaiser Showcases the Newest in Precision Tooling at Westec Booth #2632

January 18, 2007 Elk Grove Village, IL - BIG Kaiser Precision Tooling Inc. will showcase a number of tooling product lines at Westec 2008. Visit BIG Kaiser at Booth #2632 to see what's new from BIG Daishowa, Kaiser, Sphinx, Speroni, Unilock and more. BIG Kaiser's new C-Cutter Mini's compact design reduces the cutting diameter to the lowest limit, helping achieve ultra high spindle speeds and...

Read More »

All Topics