Trunnion Machine adapts to changing needs.
High Performance Trunnion (HPT) Machine features sliding spindle carriers that allow most cutting tools to be changed outside machine base in less than 1 minute. HPT is available with spindle horsepower of 5, 7.5 and 10 HP. Eight workholding stations are standard, and each is equipped with 2-jaw chuck that can use interchangeable top jaws. Control system uses IndramatÃ-® CNC and...
Read More »
Horizontal Machining Center suits high volume production.
F3-660L offers spindle speeds from 0 to 20,000 rpm in 1.55 sec, 3.2G acceleration/deceleration rates, 90 deg table indexing at 0.8 sec, and chip-to-chip time of 2.4 sec. Rapid traverse rate for X, Y, and Z axis is 4720 ipm. Strokes for X and Y axes are 26 in.; Z axis stroke is 20 in. Tool magazine stores 40 tools with No. 40 taper. Tool life management software, 2-pallet changer, flood and base...
Read More »
Horizontal Machining Center suits high volume production.
F3-660L offers spindle speeds from 0 to 20,000 rpm in 1.55 sec, 3.2G acceleration/deceleration rates, 90 deg table indexing at 0.8 sec, and chip-to-chip time of 2.4 sec. Rapid traverse rate for X, Y, and Z axis is 4720 ipm. Strokes for X and Y axes are 26 in.; Z axis stroke is 20 in. Tool magazine stores 40 tools with No. 40 taper. Tool life management software, 2-pallet changer, flood and base...
Read More »Multiple Profile System changes tools in 0.5 seconds.
MPS 08 Multiple Profile System allows users to machine semi-finished stock up to 10 meters long. It accepts semi-finished round bars, square bars, tubes, angle profiles, or bent profile materials. Two synchronized NC fixtures can rotate workpieces at up to 50 rpm. Installation area is less than 20 sq ft, and MPS 08 may be adapted to standard machining centers. Chip-to-chip times are clocked at...
Read More »
Key Elements to Designing Sound Enclosures
Download our guide to learn about the crucial factors in designing effective sound enclosures.
Read More »Multiple Profile System changes tools in 0.5 seconds.
MPS 08 Multiple Profile System allows users to machine semi-finished stock up to 10 meters long. It accepts semi-finished round bars, square bars, tubes, angle profiles, or bent profile materials. Two synchronized NC fixtures can rotate workpieces at up to 50 rpm. Installation area is less than 20 sq ft, and MPS 08 may be adapted to standard machining centers. Chip-to-chip times are clocked at...
Read More »
Multi-Tasking Machine combines machining and turning centers.
Integrex e-410H offers milling spindle with B-axis, C-axis and X, Y and Z-axes. 35 HP main and second spindles, with full C-axis, operate at up to 4,000 RPM and deliver 470 ft-lb of torque. B-axis has 240 deg travel range and performs full 5-axis contouring. E-mail communication through cell-phone link offers instant notification of machine alarm or production status. Fusion 640M Pro CNC system...
Read More »
Multi-Tasking Machine combines machining and turning centers.
Integrex e-410H offers milling spindle with B-axis, C-axis and X, Y and Z-axes. 35 HP main and second spindles, with full C-axis, operate at up to 4,000 RPM and deliver 470 ft-lb of torque. B-axis has 240 deg travel range and performs full 5-axis contouring. E-mail communication through cell-phone link offers instant notification of machine alarm or production status. Fusion 640M Pro CNC system...
Read More »
Horizontal Machining Center produces near-dry chips.
HORKOS HFN-R40H machining center, with Minimum Quantity Lubrication (MQL), consumes just 20 to 50 mL per hour and minimizes concerns associated with cutting fluids when drilling, reaming, boring or tapping. It has 40-taper spindle and 20.8 x 22.0 x 20.8 in. work area travel. Rigid z-axis ram carries 5.5, 7.5, or 15 kW, 12,000 or 15,000 rpm direct-drive spindle. Machine has automatic tool changer...
Read More »
Horizontal Machining Center produces near-dry chips.
HORKOS HFN-R40H machining center, with Minimum Quantity Lubrication (MQL), consumes just 20 to 50 mL per hour and minimizes concerns associated with cutting fluids when drilling, reaming, boring or tapping. It has 40-taper spindle and 20.8 x 22.0 x 20.8 in. work area travel. Rigid z-axis ram carries 5.5, 7.5, or 15 kW, 12,000 or 15,000 rpm direct-drive spindle. Machine has automatic tool changer...
Read More »
Horizontal Machining Centers are FMS system-ready.
HU50-5AX tilting trunnion table type machine accommodates part dia up to 27 in. and weights up to 1430 lbs. 50 taper spindles are available with up to 12,000, or 15,000 rpm and 40 taper up to 20,000 rpm. HU40T features max part dia of 20 in. 40 taper spindles are available with up to 12,000, 15,000, 20,000 rpm or 30 taper up to 40,000 rpm. Both machines hold 0.00012 in. true position through all...
Read More »
5 and 13 Micron Resolve Columns with Greater Bed Stability
Jordi Labs provides materials solutions that set the standard for innovation and quality. Our line of GPC and GFC columns are on the cutting edge of precision manufacturing and a result of our uncompromising commitment to quality and customer service. See our video to learn more.
Read More »
