Grinding Center offers modular design and digital control.
MLAMISBURG, OH - United Grinding Technologies, Inc. (UGT) announces the introduction of a new addition to its Maegerle line of high-performance grinding centers, the MGC-Special. According to Chris Stine, vice president, renowned Maegerle modular machine design facilitates quick setup and changeover, while state-of-the-art digital control and drive systems and user-friendly programming make the...
Read More »
Machining Center provides rapid production.
Model TC-S2A drills, taps, and mills workpieces with drum-style tool changer (14-tool capacity) and spindle speeds up to 16,000 rpm. Traverse rates for X/Y axes and Z-axis are 1,417 and 1,968 ipm respectively. Able to be used with G-code and proprietary non-stop tool change code, controller offers conversational system that reduces time from programming to machining.
Read More »
Grinding Center offers modular design and digital control.
MLAMISBURG, OH - United Grinding Technologies, Inc. (UGT) announces the introduction of a new addition to its Maegerle line of high-performance grinding centers, the MGC-Special. According to Chris Stine, vice president, renowned Maegerle modular machine design facilitates quick setup and changeover, while state-of-the-art digital control and drive systems and user-friendly programming make the...
Read More »
End Facing and Centering Machines work both ends simultaneously.
Model MC 650 has 2 horizontally opposed #50, 20 hp taper spindles, each with 3-axis CNC plus 20-position automatic tool changer. Work capacity is 8 in. dia. x 59 in. long, suitable for machining solid shafts, with or without flanges, bars, and tubular-type parts. Model CM 132/IS040/TC12 has 2 horizontally opposed #40 taper spindles, each with 2-axis CNC and 12-position tool changer, for work...
Read More »
Mitigating Supply Chain Risks for Sheet Metal Components
This ebook provides an overview into mitigating supply chain risks for sheet metal components.
Read More »
End Facing and Centering Machines work both ends simultaneously.
Model MC 650 has 2 horizontally opposed #50, 20 hp taper spindles, each with 3-axis CNC plus 20-position automatic tool changer. Work capacity is 8 in. dia. x 59 in. long, suitable for machining solid shafts, with or without flanges, bars, and tubular-type parts. Model CM 132/IS040/TC12 has 2 horizontally opposed #40 taper spindles, each with 2-axis CNC and 12-position tool changer, for work...
Read More »
Horizontal Machining Center handles large payloads.
Model a71 horizontal machining center, with 20 in. pallet and standard 50-taper, 10,000 rpm spindle, is designed for medium- to high-volume production. It offers ring-type, 60-tool magazine, with 6-12 sec seek times, complemented by automatic tool changer with 1.7 sec tool-to-tool and 3.2 sec chip-to-chip times. System includes next generation Geometric Intelligence (GI) servo control and handles...
Read More »
Horizontal Machining Center handles large payloads.
Model a71 horizontal machining center, with 20 in. pallet and standard 50-taper, 10,000 rpm spindle, is designed for medium- to high-volume production. It offers ring-type, 60-tool magazine, with 6-12 sec seek times, complemented by automatic tool changer with 1.7 sec tool-to-tool and 3.2 sec chip-to-chip times. System includes next generation Geometric Intelligence (GI) servo control and handles...
Read More »
Vertical Machining Center has 0.9 second tool change time.
By integrating multiple machining processes in a single setup, Mazak's new Variaxis 630 Vertical Machining Center with tilt and rotary table offers high flexibility with its simultaneous 5-axis machining capability of machining multiple-faced parts in one setup. Complex-surfaced parts are also candidates for a Variaxis full 5-axis machine. With one setup production, lead times and costs are...
Read More »
Machining Center integrates multiple processes in one setup.
By integrating multiple machining processes in a single setup, Mazak's new Variaxis 500 Vertical Machining Center with tilt and rotary table offers high flexibility with its full 5-axis machining capability to produce complex 3D or multiple-faced parts in one setup. With one setup production, lead times and costs are substantially reduced while overall part quality is increased by keeping the...
Read More »
Vertical Machining Center has 0.9 second tool change time.
By integrating multiple machining processes in a single setup, Mazak's new Variaxis 630 Vertical Machining Center with tilt and rotary table offers high flexibility with its simultaneous 5-axis machining capability of machining multiple-faced parts in one setup. Complex-surfaced parts are also candidates for a Variaxis full 5-axis machine. With one setup production, lead times and costs are...
Read More »
Do You Have Unique Lifting Needs?
EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.
Read More »
