Machining Centers have twin spindles.
MCT 160 and MCT 250 both have twin spindles with dedicated B axis for each spindle, allowing simultaneous machining on four sides of two different parts. Both models have twin automatic toolchangers with servo-driven lift and rotate systems. Working envelopes for each spindle are 450 x 450 x 450 mm for MCT 160 and 690 x 690 x 520 mm for MCT 250. Maximum part sizes for the MCT 160 and MCT 250 are...
Read More »
Machining Center handles heavy, box-shaped components.
Model YBM-10T Precision Center, capable of high-speed positioning of 45 m/min, uses twin ball screws on each of 3 axes. Ball-screw and twin servo-drive system provide vertical movement and straightness of head stock. Axial/radial combination roller bearing on B-axis allows components up to 5 tons to be rotated and positioned. Hybrid system offers load sensing and surface pressure compensation...
Read More »
Machining Center handles heavy, box-shaped components.
Model YBM-10T Precision Center, capable of high-speed positioning of 45 m/min, uses twin ball screws on each of 3 axes. Ball-screw and twin servo-drive system provide vertical movement and straightness of head stock. Axial/radial combination roller bearing on B-axis allows components up to 5 tons to be rotated and positioned. Hybrid system offers load sensing and surface pressure compensation...
Read More »
Machining Center provides multi-tasking.
(Florence, KY) Mazak introduces the innovative Integrex e-410H, a high-performance multi-tasking machine that can deliver uncompromised machining with the abilities of a machining center and turning center combined. For example, the Integrex e-410H has the ability to produce a complete 4-cylinder engine block in a single setup, and to do complete turning with 5-axis machining in any combination....
Read More »
Plastic Knobs
Knobs - Customizable Solutions To learn more about the different types of Knob solutions available, and which ones to select for your specific application, download this guide now.
Read More »
Machining Center provides multi-tasking.
(Florence, KY) Mazak introduces the innovative Integrex e-410H, a high-performance multi-tasking machine that can deliver uncompromised machining with the abilities of a machining center and turning center combined. For example, the Integrex e-410H has the ability to produce a complete 4-cylinder engine block in a single setup, and to do complete turning with 5-axis machining in any combination....
Read More »
Machining Center has 50 taper spindle and 25.2 in. pallet.
Model a81 Horizontal Machining Center (HMC) diminishes out-of-cut time with ring-type, 40-tool magazine, automatic tool changer, with 1.7 second tool-to-tool change times. Capable of handling payloads to 3,300 lbs, it offers 10,000 rpm spindle equipped with 300 psi through-spindle coolant system. Traverse and cutting rates are 2,362 ipm. Model a81 is capable of simultaneous B-axis movement with...
Read More »
Machining Center has 50 taper spindle and 25.2 in. pallet.
Model a81 Horizontal Machining Center (HMC) diminishes out-of-cut time with ring-type, 40-tool magazine, automatic tool changer, with 1.7 second tool-to-tool change times. Capable of handling payloads to 3,300 lbs, it offers 10,000 rpm spindle equipped with 300 psi through-spindle coolant system. Traverse and cutting rates are 2,362 ipm. Model a81 is capable of simultaneous B-axis movement with...
Read More »
Horizontal Machining Center reduces non-cutting time.
HMC 95, with 500 x 400 mm pallet, offers rapid traverse of 1970 ipm, acceleration of .7 g, and 4 sec chip-to-chip tool change. High torque, 2-speed spindle or high-speed 16,000 rpm spindle is available. Standard 360,000 position table has rotary indexing speed of 40 rpm. HMC 95 features 4 sigma accuracy of .0003 in. positioning and .00015 in. repeatability. It includes 50-tool magazine, Siemens...
Read More »
Horizontal Machining Center reduces non-cutting time.
HMC 95, with 500 x 400 mm pallet, offers rapid traverse of 1970 ipm, acceleration of .7 g, and 4 sec chip-to-chip tool change. High torque, 2-speed spindle or high-speed 16,000 rpm spindle is available. Standard 360,000 position table has rotary indexing speed of 40 rpm. HMC 95 features 4 sigma accuracy of .0003 in. positioning and .00015 in. repeatability. It includes 50-tool magazine, Siemens...
Read More »
Machining Center offers accuracy better than ISO 10791-4.
u-4800 HMC features 40 hp spindle able to accelerate from 0 to 15,000 rpm in 1.9 sec. Rapid traverse rates and max feed rate are 2,362 ipm with 1 G acceleration. Automatic Tool Changer produces 2.5 sec chip-to-chip tool change time. Two-pallet changer machine has 15.7 in. square pallet and pallet change time of 5 sec. X, Y, Z axis strokes are 22, 24.8, and 23.6 in. respectively.
Read More »
ISO-Certified Precision Machining and Contract Manufacturing Services from DFF
DFF is an industry leading contract manufacturer specializing in medium to high production precision machined components and electromechanical assemblies. Our 100 CNC machining centers and design-assist capabilities ensure our customers' needs are always met. Check out our video to learn more.
Read More »
