Lathes

Turrets

With the Industry's Only Turret with a Built-In Motor(TM), the NL Series of CNC Lathes Reaches 5000 Units Shipped

On November 1, 2006, Mori Seiki's NL Series, which was released in June 2004 and which features the only Turret with a built-in motor(TM) in the industry, passed 5000 units shipped. To reach this mark in only 2 years is an incredible achievement. By placing the motor inside the turret, the NL Series minimizes the heat and vibration which spread over a wide area from the many parts which...

Read More »
Material Handling Equipment

Royal Introduces New Rota-Rack Rotary Parts Accumulator

Royal Products introduced a new patent-pending Rota-Rack Rotary Parts Accumulator at IMTS '06. The Royal Rota-Rack offers a lean, cost-effective method for safely collecting finished parts as they come off of a CNC lathe, providing true unmanned production. Features include: o A unique rotary spiral that safely directs parts to the center of the turntable o A low-friction UHMW material coats the...

Read More »
Turrets

With the Industry's Only Turret with a Built-In Motor(TM), the NL Series of CNC Lathes Reaches 5000 Units Shipped

On November 1, 2006, Mori Seiki's NL Series, which was released in June 2004 and which features the only Turret with a built-in motor(TM) in the industry, passed 5000 units shipped. To reach this mark in only 2 years is an incredible achievement. By placing the motor inside the turret, the NL Series minimizes the heat and vibration which spread over a wide area from the many parts which...

Read More »
Material Handling Equipment

Royal Introduces New Rota-Rack Rotary Parts Accumulator

Royal Products introduced a new patent-pending Rota-Rack Rotary Parts Accumulator at IMTS '06. The Royal Rota-Rack offers a lean, cost-effective method for safely collecting finished parts as they come off of a CNC lathe, providing true unmanned production. Features include: o A unique rotary spiral that safely directs parts to the center of the turntable o A low-friction UHMW material coats the...

Read More »
Miscellaneous Software

Delcam to Launch PartMaker in Japan at JIMTOF 2006

Delcam will launch its recently acquired PartMaker range of software in Japan on booth W0021 at the JIMTOF 2006 exhibition to be held in Tokyo from 1st - 8th November. PartMaker is the world's leading system for the programming of multi-axis lathes with live tooling and CNC Swiss-type lathes. PartMaker is a knowledge-based machining system, allowing it to provide substantial gains in programming...

Read More »
Miscellaneous Software

Delcam to Show New Machining Software at Euromold Medical Technology

Delcam will demonstrate its recently-acquired SwissCAM and Dentmill CAM systems for the medical and dental industries at the new Medical Technology section within the Euromold exhibition. The exhibition takes place in Frankfurt from 29th November to 2nd December. SwissCAM is the industry-leading applications for the programming of Swiss-type lathes. These machines are used in the medical industry...

Read More »
Miscellaneous Software

Delcam to Launch PartMaker in Japan at JIMTOF 2006

Delcam will launch its recently acquired PartMaker range of software in Japan on booth W0021 at the JIMTOF 2006 exhibition to be held in Tokyo from 1st - 8th November. PartMaker is the world's leading system for the programming of multi-axis lathes with live tooling and CNC Swiss-type lathes. PartMaker is a knowledge-based machining system, allowing it to provide substantial gains in programming...

Read More »
Miscellaneous Software

Delcam to Show New Machining Software at Euromold Medical Technology

Delcam will demonstrate its recently-acquired SwissCAM and Dentmill CAM systems for the medical and dental industries at the new Medical Technology section within the Euromold exhibition. The exhibition takes place in Frankfurt from 29th November to 2nd December. SwissCAM is the industry-leading applications for the programming of Swiss-type lathes. These machines are used in the medical industry...

Read More »
Turning Center features 5C 1-1/16 in. bar capacity spindle.
Machining Centers (Machinery)

Turning Center features 5C 1-1/16 in. bar capacity spindle.

ELITE 27 MS turning center includes main spindle featuring 8,000 rpm drive system with 10 hp rating and 35 lb-ft torque rating, and 2-axis programmable sub-spindle that includes Fanuc 3 hp, 2.2 kW drive system with speeds from 0 to 8,000 rpm clockwise and counter-clockwise. Weighing 7,820 lb, system has 16 station top plate with non-lift turret indexing for contaminant-free operation. Z-axis...

Read More »
Turning Center features 5C 1-1/16 in. bar capacity spindle.
Machining Centers (Machinery)

Turning Center features 5C 1-1/16 in. bar capacity spindle.

ELITE 27 MS turning center includes main spindle featuring 8,000 rpm drive system with 10 hp rating and 35 lb-ft torque rating, and 2-axis programmable sub-spindle that includes Fanuc 3 hp, 2.2 kW drive system with speeds from 0 to 8,000 rpm clockwise and counter-clockwise. Weighing 7,820 lb, system has 16 station top plate with non-lift turret indexing for contaminant-free operation. Z-axis...

Read More »

All Topics