
Turning Center machines complex components in one pass.
With 2 Y-axis turrets and transverse movement of combined counter-spindle and tailstock assembly, CTX beta 1250 4A can machine components from bar up to 102 mm diameter and 1,200 mm in length in both main and counter spindles, as well as chucked workpieces up to 300 mm long. Both spindles have integrated spindle motor that delivers up to 360 Nm at 5,000 rpm. Featuring 12 stations each, two VDI...
Read More »MEMS Module serves advanced motion-sensing applications.
With 6 degrees of freedom, LSM330DL multi-sensor module combines 3-axis sensing of linear and angular motion. It detects acceleration up to 16g and angular rate up to 2,000 dps along pitch, roll, and yaw axes. Able to operate with 2.4-3.6 V supply, module integrates of 3-axis digital accelerometer with 3-axis digital gyroscope. Mechanical sensing structure promotes thermal and mechanical...
Read More »DEK Partners with OKI to Introduce Breakthrough Technologies at First Advanced SMT Processes and Applications Seminar in Chengdu
DEK, the world's leading mass imaging equipment supplier, introduced two breakthrough technologies, ProActiv and Nano-ProTek stencil coating, to customers in Chengdu last week. These latest cutting-edge technologies and application processes, in addition to LGA/QFN rework, were presented at the first Advanced SMT Processes and Applications Seminar 2011 in Chengdu. The rapid development of the...
Read More »
Horizontal Media Mills Figure Prominently in Lithium-Ion Battery Pre-Production
AKRON, OH - With the federal government looking for 1 million electric vehicles on U.S. roadways within just four years, Attritor and horizontal media mill manufacturer Union Process, Inc., is right in the middle of the mix. Lithium-ion batteries are the focus for powering these vehicles, and the Akron-based equipment maker has developed a two-phase process for grinding and dispersing the...
Read More »
A&D MRO: Strong Tailwinds
Check out this overview of the Maintenance, Repair and Operations (MRO) segment of the Aerospace and Defense (A&D) industry along with the factors impacting its continued growth.
Read More »
Saw Blade cuts plywood and plywood veneers.
Made from corrosion-resistant C-4 micrograin carbide, Ply Veneer Worker Blade delivers rip and cross cuts of 2-sided plywood, finished or unfinished. It also provides finish-quality cross cuts on hardwood laminated sheet products and natural wood of all types. Measuring 10 in. in diameter with 10° hook and 70 teeth, blade performs flawless cuts without splintering or fuzz and without...
Read More »
Essemtec to Highlight Paraquda SMD Pick-and-Place at NEPCON South China
At the upcoming NEPCON South China exhibition, taking place August 30-September 1 in Shenzhen, China, Essemtec will highlight the Paraquda SMD pick-and-place, the first system ever to use ePlace operating software, as well as the new Cobra feeder. NEPCON South China is one of the biggest and longest standing SMT trade events in South China that features all major brands in the SMT world. It is a...
Read More »
China Steel of Sault Ste. Marie, Ontario Installs Massive 24'x13' 90KSI Jet Edge Waterjet Cutting Machine
Diversified Metal Fabricator and Machine Shop Capable of Processing Virtually Any Material up to 50% Faster than Most Waterjet Shops SAULT STE. MARIE, Ontario, Canada (July 26, 2011) - China Steel, a custom fabrication and machine shop in Sault Ste. Marie, Ontario, recently added a massive 90KSI Jet Edge waterjet cutting machine capable of cutting virtually any material up to 24'x13'. With its...
Read More »
OMAX® to Spotlight 80X JetMachining® Center with Advanced Accessories at CMTS
Kent, Washington, July 27, 2011 - OMAX Corporation will demonstrate its highly accurate 80X JetMachining Center at the 2011 Canadian Manufacturing Technology Show, taking place October 17-20 at the Direct Energy Centre in Toronto. Visitors to Spark & Co.'s booth 1910 will experience this large format abrasive waterjet system equipped with the revolutionary EnduroMax(TM) pump and Tilt-A-Jet®...
Read More »Pro-Print Picks Energy-saving Champion
Two KBA Rapida 75E presses debut in South Africa The E-version of KBA's B2 (29in) Rapida 75 launched at Ipex 2010 in Birmingham is fast gaining an international following, with installations in Europe, Asia, Latin America and, since spring this year, South Africa, where two press lines went live at Pro-Print in Congella, near Durban (KwaZulu-Natal). They are resounding proof that the E stands for...
Read More »
Sigma Plastics Group to Install 5-Layer VAREX Blown Film Line from Windmoeller & Hoelscher
LINCOLN, RI - The Sigma Plastics Group will install a 5-layer VAREX blown film line from Windmoeller & Hoelscher Corporation at the Nashville, TN facility of FlexSol Packaging. The high-output, 5-layer VAREX line is being added to accommodate growth at the plant. The line has a working width of 87 and is equipped with a stacked MULTICOOL D air ring and FILMATIC TX dual turret winder. This is...
Read More »
SRG Global Coatings Enhance Surface Durability, Efficiency, Design Flexibility
SRG Global's automotive coatings enhance the structural integrity of the finished part while also improving vehicle efficiency. Check out our video to learn more.
Read More »