Machinery & Machining Tools

Wall Slotter cuts channels in concrete and masonry.
Slotting Machinery

Wall Slotter cuts channels in concrete and masonry.

Powered by 20 A motor with 7,500 rpm no-load speed, EMF 150 uses 2 adjustable, parallel, 6 in. diamond blades to cut channels up to 1 13/16 in. wide x 1 ¾ in. deep in concrete and masonry. Tool accommodates needs of plumbing, HVAC, and electrical renovations by allowing pipe, conduit, and wire to be placed inside walls and floors. Closed hood optimizes air flow and facilitates fragment...

Read More »
Low-Profile Rotary Table has high-resolution design.
Rotary Positioning Stages / Tables

Low-Profile Rotary Table has high-resolution design.

Driven by piezo motors, higher-precision version of M-660 has 0.6 in. profile, direct measuring encoder, and direct drive and can accelerate to velocities of 720°/sec. Directly coupled precision optical encoder resolves positions down to 4 Â-µrad (0.00023°), providing phase-lag-free, backlash-free feedback to servo controller. Self-clamping ceramic drive promotes stability, with...

Read More »
imX Learning Lab Overview 1 MAG booths 2748 and 2762
Cut-Off Machinery

imX Learning Lab Overview 1 MAG booths 2748 and 2762

imX Learning Lab offers first in-depth look at patented cryogenic tool cooling that rewrites the book on machining of hard metals and composites Offers up to 10X longer tool life or up to 4X faster cutting in hard metals. Sets new standards for composites cutting, too. July 15, 2011 - MAG delivers on the promise of imX Learning Labs by providing the first in-depth look at the capabilities of its...

Read More »
Grinders

Micron Creep-Feed-Grinder: High Performance CBN-Rotor Grinding on Micron Machines

The New Micron Macro-S Achieves up to a 30% Reduction in Cycle Time Compared with Competitors' Grinding Processes RENDSBURG, Germany - Peter Wolters GmbH, a manufacturer of high-precision machine tools headquartered in Rendsburg, Germany, today announced the release of its new MICRON Macro-S tool for CBN rotor grinding. Gerotors are used widely today throughout the industry, and are produced in a...

Read More »
Patching Equipment

Concrete Patch Kit features non-critical mix ratio.

Developed as permanent solution to all types of concrete patching, repair, and resurfacing needs, RAPID-CONCRETE PATCH comes with 5 gallon pail, resin, and hardener with aggregate. Product is suited for fixing cracking and flaking concrete, plus filling holes in driveways, floors, and other spalling repairs. Ready for traffic in less than 30 minutes, RAPID-CONCRETE PATCH withstands heavy,...

Read More »
Presses

KBA Rapida 185 Prints High-volume Packaging at Linocraft

On 12 October last year the biggest sheetfed offset press in the Asia-Pacific region launched into action up bang on schedule Linocraft Printers in Johor Bahru, Malaysia, following an installation and commissioning period of just five weeks. The highly automated Rapida 185 six - colour coater press for a sheet size of 130 x 185 cm (51.18 x 72.83in) is the company's second KBA press and joins a...

Read More »
Controls and Controllers

Aircraft Skin Processing's Secret Weapon: Combitronic Communication

Santa Clara, Calif. - Utilizing Animatics' SmartMotor(TM) with Combitronic communication resulted in a 49% reduction of parts used and increased capabilities on the Flexitool(TM) aircraft skin processing machine for LinÃ-© Machines in Quebec, Canada. When raising or lowering any panel on the Flexitool tooling system, all of the actuators in the machine need to move in sync vertically from any...

Read More »
Cutting Tool Inserts

Finishing Solutions for Tungsten Carbide Inserts

PETER WOLTERS offers a wide range of high-precision surface finishing solutions. Our fine grinding technology provides improved methods for processing reversible cutting tool inserts. Peter Wolters has simplified the system set up from one insert to the next, so a part change can now be carried out within minutes. With the support of Peter Wolters specially programmed control software, and our...

Read More »
Methods to Feature "Production On Demand" at imX 2011
Lathes

Methods to Feature "Production On Demand" at imX 2011

Learning Lab Sessions to Feature Innovative Technology and Strategies for Today's Manufacturing Challenges. Sudbury, MA, U.S.A. - Methods Machine Tools, Inc., a leading supplier of innovative precision machine tools, will be featuring solutions for Production on Demand" at the imX-Interactive Manufacturing Experience event to be held in Las Vegas, September 12-14, 2011. Methods is one of the...

Read More »
SMD Rework System removes, places, and solders BGAs, CSPs, QFPs.
Soldering Machinery

SMD Rework System removes, places, and solders BGAs, CSPs, QFPs.

Compatible with delicate SMD packages, BR810 has adjustable PCB holder that accepts PCBs up to 18.5 x 13.8 in. as well as split-vision optics with 22x electronic zoom and focus controls and LED lighting. Additional features include profile settings for independent and programmable top and bottom heating, 5 separate thermocouple inputs, control software, and LCD touchscreen display. Capable of...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers