Machinery & Machining Tools

HASCO - Innovations at FAKUMA in Friedrichshafen
Controls and Controllers

HASCO - Innovations at FAKUMA in Friedrichshafen

HASCO's Mould Base and Hot Runner divisions will present a variety of innovative solutions for mouldmaking and tooling design at the upcoming FAKUMA in Friedrichshafen. The LÃ-¼denscheid/Germany-based company is specialised in the development and manufacture of standard mould units and hot runner systems for the plastics processing industry. The Mould Base Division will introduce its newly...

Read More »
AIDA Introduces New MCX Straightside Presses
Presses

AIDA Introduces New MCX Straightside Presses

AIDA-America Corp., Dayton, OH, introduces its new line of straightside stamping presses, the MCX Series. The MCX, modular configuration series presses, offer stampers a wide array of press configurations and specifications. Options include: single or double gear, Â-¼ or ½ inch rating points, five drive options, including mechanical or servo, a wide variety of stroke lengths and die...

Read More »
Sensors / Detectors / Transducers

Wafer Defect Review System is designed for 20 nm node.

Suitable for chip manufacturing at 20 nm device nodes and below, eDR(TM)-7000 electron-beam (e-beam) wafer defect review system addresses defect imaging and classification challenges at leading edge or located at bottom of deep trench/hole. System can drive directly to site of defect at high resolution, enabling review of multiple defects per second. Features include stage and vibration-isolation...

Read More »
Laser Alignment Tuning Kits support research setups.
Aligners

Laser Alignment Tuning Kits support research setups.

Equipped with 1917-R laser power meter, LAKIT Series Tuning Kits utilize broad selection of optical detectors, including silicon, Germanium, or thermopile detectors. Units operate in wavelengths from 200 nm to 10.6 microns, with up to 100 W average power. Series 918D, designed for low power lasers less than 2 W/cmÂ-², operates in visible or IR spectrum. Series 818P thermopile detectors are...

Read More »
Rehm Prepares to Launch New Locally-built Convection Soldering System at Nepcon Shenzhen, Stand 1H38
Soldering Machinery

Rehm Prepares to Launch New Locally-built Convection Soldering System at Nepcon Shenzhen, Stand 1H38

Rehm Thermal Systems has confirmed plans to releases its highly anticipated VisionXC convection soldering system on stand 1H38 at this year's Nepcon Shenzhen exhibition. Taking place on August 30th in China's Shenzhen International Convention & Exhibition Center, the event will see Rehm unveil its brand new system, exclusively manufacturer in, and developed for, the Chinese marketplace. Extending...

Read More »
Mitsubishi Showcases Total Supply Chain at CMTS Booth #3300
Benders

Mitsubishi Showcases Total Supply Chain at CMTS Booth #3300

Wood Dale, IL - Mitsubishi announces its extensive lineup of complementary technologies to be showcased at CMTS booth #3300. Mitsubishi will highlight the latest in wire EDM, sinker EDM, waterjet, press brake and laser technologies. Mitsubishi will showcase its newest, large-capacity wire EDM, the BA24. The machine's 16.5-inch fully submerged Z axis makes it ideal for the large oil and gas...

Read More »
Kurt Introduces a Wide Range of Hydraulic Swing Clamps, Valves and Pumps - They Position and Clamp Workpieces for High Precision Machining Repeatability
Valves

Kurt Introduces a Wide Range of Hydraulic Swing Clamps, Valves and Pumps - They Position and Clamp Workpieces for High Precision Machining Repeatability

Minneapolis, Minnesota: Kurt announces the introduction of a wide range of Hydraulic Swing Clamps, Valves and Pumps for clamping workpieces in a high production machining environment. This new Kurt product line provides a wide range of Swing Clamps and accessory options for configuring the right workholding system for a single machining center or a multi-pallet cell with multiple machines. This...

Read More »
Polygon Solution's GT Series Rotary Broach Tool Holder
Broaches

Polygon Solution's GT Series Rotary Broach Tool Holder

The rotary broach is a marvel of modern machine tooling. This cutting tool allows machinists to add internal hexagon, square and other forms to precision metal parts. The modern machine shop can benefit from the quick set-up and ease of use available in adjustment free broach holders. The GT Series broach holder available from Polygon Solutions has been designed for this purpose, and often...

Read More »
Chandox Super Precision and Standard Air Chucks
Chucks and Collets

Chandox Super Precision and Standard Air Chucks

LMC Workholding offers Chandox 1 micron super precision air chucks and standard precision air chucks for grinding, rotary tables, and turning applications. These air chucks are available in several models with gripping force ranging from 3.1Kn (697 lb-f) to 21.6 Kn (4855 lb-f). The chucks are equipped with pre-machined tapped holes for fixing jigs or parts locators, eliminating additional...

Read More »
Quick-Cycle HIPs Strengthen MIM/PIM Parts at Lower Cost
Presses

Quick-Cycle HIPs Strengthen MIM/PIM Parts at Lower Cost

FRANKLIN, Tennessee, USA - Today, tens of thousands of structural parts are produced by powder injection molding (PIM) technology. Many of these are quite small (Microminiature PIM) components of electronic, medical, telecommunications and computing devices. Because of their small load-bearing areas, they require particularly high levels of tensile strength and hardness. PIM compacts are...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers