Mazak Brings Big-part Multi-Tasking Prowess and Advanced CNC to WMTS
FLORENCE, Ky., April 12, 2017 – At WMTS 2017, Mazak Canada will demonstrate how the QTN 450M turning center with Multi-Tasking DONE IN ONE® capabilities boosts productivity and reduces cycle times for large-diameter, shaft-type part manufacturing in industries such as oil and gas. The company will also run simulations of its MAZATROL SmoothX CNC, the industry’s fastest most progressive...
Read More »MS3 Inserts come with HiPIMS PVD coating.
Suitable for machining unstable or thin-walled components and setups, MS3 Inserts are equipped with coolant jet guiding geometry. Featuring smooth surface and extremely sharp cutting edges, MS3 inserts are used for cutting high temperature alloys, titanium, cobalt-based and nickel-based alloys. Units are combined with WSM01 grade and secondary applications include steel, stainless steel and...
Read More »MS3 Inserts come with HiPIMS PVD coating.
Suitable for machining unstable or thin-walled components and setups, MS3 Inserts are equipped with coolant jet guiding geometry. Featuring smooth surface and extremely sharp cutting edges, MS3 inserts are used for cutting high temperature alloys, titanium, cobalt-based and nickel-based alloys. Units are combined with WSM01 grade and secondary applications include steel, stainless steel and...
Read More »PEMSERTER Fastener Installation Press operates on air-over-oil actuating system.
Featuring job search and recall operating modes, PEMSERTER Fastener Installation Press comes with touch-screen, graphics, smart dwell, force verification and multi-language capabilities. Equipped with fastener and batch counters, unit provides descriptive screen alerts and is equipped with self-diagnostic and LIGHTSTREAM® Operator Safety System. Unit delivers 71.2 kN of ram force and 61 cm...
Read More »3-axis vs. 5-axis
Our latest Ebook breaks down the difference between 3-axis and 5-axis CMM measurement methods.
Read More »PEMSERTER Fastener Installation Press operates on air-over-oil actuating system.
Featuring job search and recall operating modes, PEMSERTER Fastener Installation Press comes with touch-screen, graphics, smart dwell, force verification and multi-language capabilities. Equipped with fastener and batch counters, unit provides descriptive screen alerts and is equipped with self-diagnostic and LIGHTSTREAM® Operator Safety System. Unit delivers 71.2 kN of ram force and 61 cm...
Read More »TSX Series Cutter comes with 4-corner tangentially mounted insert.
Available in two precision-ground insert sizes for providing maximum depth of 8mm and 12mm, TSX Series Cutter is designed with tough and sharp cutting edge. Suitable for small job cuttings to heavy duty applications, TSX Series Cutter offers reduced cutting force, surface roughness Ra less than 0.5 µm and squareness less than 0.05mm.
Read More »TSX Series Cutter comes with 4-corner tangentially mounted insert.
Available in two precision-ground insert sizes for providing maximum depth of 8mm and 12mm, TSX Series Cutter is designed with tough and sharp cutting edge. Suitable for small job cuttings to heavy duty applications, TSX Series Cutter offers reduced cutting force, surface roughness Ra less than 0.5 µm and squareness less than 0.05mm.
Read More »NanoFix® Quick Change System uses Torx locking mechanism.
Featuring 5 μm on 30 mm high concentricity and 22 mm spindle distance, repeatable accuracy and short projection, NanoFix® Quick Change System is designed for Swiss-type tooling. Taking less than 15 sec for changing tools inside the Swiss lathe, system’s NanoFix adapter can be released and removed using one hand with Torx locking mechanism. Product replaces hard-to-reach ER collets.
Read More »NanoFix-® Quick Change System uses Torx locking mechanism.
Featuring 5 μm on 30 mm high concentricity and 22 mm spindle distance, repeatable accuracy and short projection, NanoFix® Quick Change System is designed for Swiss-type tooling. Taking less than 15 sec for changing tools inside the Swiss lathe, system’s NanoFix adapter can be released and removed using one hand with Torx locking mechanism. Product replaces hard-to-reach ER collets.
Read More »QUAD 7 Blades feature positive rake angle four-tooth pattern.
Available in ¾ in. x .050, 1-1/2 in. x .050, 2 in. x .062, 2-5/8 in. x .062 and 3-1/8 in. x .062 widths, QUAD 7™ Carbide Tipped Blades are ideal for high chrome alloy, inconel and nickel-based alloys, titanium block and stainless steels. Designed with tooth pitch of 2.5 – 3.5, 2-3, 1.9-2.1, 1.4-1.8, 1.1-1.4, and .9-1.1 teeth per inch, units come with plastic capping. Blades are used in steel...
Read More »Industry Leading OEM with over 65 Years of Experience
Blonder Tongue Laboratories provides ISO 9001:2015 certified electronic contract manufacturing services at our on-site lab. We specialize in video distribution, fiber optics, and communications but have a variety of services available to bring your products to market. See our video to learn more.
Read More »