New L-408 Linear Motorized Translation Stages from Physik Instrumente Come with Anti-Crossed Roller Bearings
The L-408 Linear Motorized Translation Stages are designed for research and industry such as optics, bio-tech, and assembly of miniature components and photonics instrumentation. The units feature a leadscrew with 0.5 mm pitch and can handle payloads of 200 N. The stages provide a travel of 25 mm with 100nm minimal incremental motion. They deliver maximum velocity of 1-10 mm/sec and encoder...
Read More »Seco Tools Introduces PCBN Inserts in New Grade Format and Geometries
The Polycrystalline Cubic Boron Nitride Inserts come in new long WL and short WS wiper radii and laser-etched chip breakers. The WL wiper inserts enable 100 percent feed-rate increase whereas the WS wiper insert’s cutting forces are reduced by 15 percent for enhanced machining in low-stability conditions. The CBN150 solid insert grade inserts deliver high-surface quality during light...
Read More »Seco Tools Introduces PCBN Inserts in New Grade Format and Geometries
The Polycrystalline Cubic Boron Nitride Inserts come in new long WL and short WS wiper radii and laser-etched chip breakers. The WL wiper inserts enable 100 percent feed-rate increase whereas the WS wiper insert’s cutting forces are reduced by 15 percent for enhanced machining in low-stability conditions. The CBN150 solid insert grade inserts deliver high-surface quality during light...
Read More »New Sunnen SV-30 Cylinder Hones are Offered with Automatic Tool Protection
The SV-30 Series Cylinder Hones are available in six standard models that include four step-and-repeat capability versions and two models with manual X-axis. The cylinder come with diameters ranging from 19 to 200 mm that depends on tooling option. The units feature spindle reversal option and produces speed ranging from 50-600 rpm. The devices are offered with PC control having simplified menus...
Read More »Checklist: How to Get the Right Belt the First Time
This guide is intended to help identify and address application criteria necessary to specify the right belt to deliver a highly efficient, reliable product.
Read More »New Sunnen SV-30 Cylinder Hones are Offered with Automatic Tool Protection
The SV-30 Series Cylinder Hones are available in six standard models that include four step-and-repeat capability versions and two models with manual X-axis. The cylinder come with diameters ranging from 19 to 200 mm that depends on tooling option. The units feature spindle reversal option and produces speed ranging from 50-600 rpm. The devices are offered with PC control having simplified menus...
Read More »Platinum Tools Offers EZ-RJ12/11 Dies That Can be Interchangeable and Reversible
The EZ-RJ12/11 Dies feature a single cycle crimp and flush trim. The units are compatible on connectors such as EZ-RJ12/11, RJ11 modular plugs and RJ12 modular plugs. The dies provide EXO Crimping System with the ability to crimp telephone connectors (RJ12/11).
Read More »Platinum Tools Offers EZ-RJ12/11 Dies That Can be Interchangeable and Reversible
The EZ-RJ12/11 Dies feature a single cycle crimp and flush trim. The units are compatible on connectors such as EZ-RJ12/11, RJ11 modular plugs and RJ12 modular plugs. The dies provide EXO Crimping System with the ability to crimp telephone connectors (RJ12/11).
Read More »New Inserts Available in Three Different Geometries
The Walter WMP45G Tiger-tec Gold grade are new round indexable inserts for the F2334R copy milling cutter. The inserts is available in three different geometries of D57, D67 and F67 in order to suit various machines, clamping arrangements and workpiece geometries. The WMP45G grade was designed for turbine blade machining as they can handle both face milling and copy milling of martensitic and...
Read More »New Inserts Available in Three Different Geometries
The Walter WMP45G Tiger-tec Gold grade are new round indexable inserts for the F2334R copy milling cutter. The inserts is available in three different geometries of D57, D67 and F67 in order to suit various machines, clamping arrangements and workpiece geometries. The WMP45G grade was designed for turbine blade machining as they can handle both face milling and copy milling of martensitic and...
Read More »Schuler Installs First Laser Blanking Line for Asia
Ansteel orders system with two cutting heads to process steel and aluminum coils for the automotive industry. Canton, Michigan – Ansteel is one of the largest steel producers worldwide and also known as the “cradle of steel industry” in China which contributed significantly to the rapid economic growth of the People’s Republic. Now, the company will also be the first Schuler customer in...
Read More »Vector® Sports Training Ball Offers Visible Point of Contact
Our goal is to help every athlete derive maximum enjoyment from their sport and become a better player. We offer a line of innovative training tools that combine cutting-edge technology and out of the box thinking to deliver an unbeatable competitive advantage. The Vector® Sports Training Ball is just another example of our commitment to innovation. To learn how the Vector® is helping ballplayers everywhere, see our video.
Read More »