Machinery & Machining Tools

Gripping Rails with Clamps improve holding force.
Chucks and Collets

Gripping Rails with Clamps improve holding force.

Pitbull Gripping Rails, with built-in clamps, maintain parallelism on non-ferrous or ferrous parts. Their asymmetric design allows for precision tolerances. Pitbull Gripping Rails also improve holding force of magnetic chucks when used to hold difficult or irregularly shaped ferrous workpieces. They allow users to add extra steel blocking to increase resistance against sliding, and can hold large...

Read More »
Workholding System has 8 clamping stations.
Workholding Systems

Workholding System has 8 clamping stations.

CT Series Cluster Tower maximizes multiple part workholding for spindle utilization, reducing tool change time and machine travel from part to part. It has automatic adjustment system that accommodates any size part within opening range. Towers are convertible from 8 to 4 single stations. Workholder is suitable for small and mid-size machining centers, including horizontal or vertical machining...

Read More »
Interchangeable Tooling fits most punch presses.
Tooling

Interchangeable Tooling fits most punch presses.

Ultra XT tooling line combines quick setup, easy installation, fast maintenance and interchangeability with other suppliers' tools and tooling systems. Tooling has hardened and ground guides, which reduce abrasive action of punching, and interior and exterior spiral grease grooves, which diffuse heat. Unit works with Amada, Finn-Power, Murata Wiedemann, Euromac, Nisshinbo, Strippit and other...

Read More »
Presses

Straight Side Press forms and blanks.

General-purpose press has operating range of 220 to 1100 tons, runs at 150 strokes/min, and has stroke range from 3.9 to 24 in. Press is available in 3 configurations: eccentric motion/single gear reduction for constant slide velocity; eccentric motion/double gear reduction that increases torque for heavier loads; and link motion/double gear reduction unit that offers 50% more torque while...

Read More »
Mortar Mill grinds up samples for analysis.
Grinders

Mortar Mill grinds up samples for analysis.

MS 100 Rapid Mortar Mill homogenizes sample volumes of 2 to 25 mL to particle size less than 20 microns, enabling samples to be pelletized for subsequent use in X-ray fluorescence or other spectral analyses. Grinding sets are available in 2 sizes and 5 different materials. Required fineness is typically achieved in 3 to 5 min. Unit has digital speed control settings for mortar and pestle, timer,...

Read More »
Welding End Prep Tool removes tube stubs from header.
Machinery

Welding End Prep Tool removes tube stubs from header.

Mini MILLHOG® air-powered ID clamping end prep tool produces high torque at low rpm for milling hardened welds that have been exposed to high heat and pressure cycling. Its heavy-duty mandrel features clamp ribs that will not flex. Running at 34 rpm and generating 1,200 ft-lb of torque at cutter blade, Mini MILLHOG uses TiN-coated blades to produce a clean, continuous chip without cutting...

Read More »
Plasma Cutting Package weighs only 35 lb, goes anywhere.
Plasma / Flame / Laser Cutters and Cutting Machinery

Plasma Cutting Package weighs only 35 lb, goes anywhere.

Lightweight and portable, Handy Plasma 550 has 35 A of cutting power at 40% duty cycle, making it able to cut 1/2 in. material. Output is adjustable so operator can tailor current for material to be cut. Power line conditioner lets unit operate off auxiliary power sources and handle poor power lines without damage, making it suitable for field use. It comes with company's PT-31 torch for drag or...

Read More »
Laser Cutting System handles 5 x 10 ft sheets in 3 dimensions.
Cutters and Cutting Machinery

Laser Cutting System handles 5 x 10 ft sheets in 3 dimensions.

6-axis Domino 1530 machine tool provides 2 and 3-dimensional cuts with CO2 lasers rated 2,500 W to 4,000 W. It works in X and Y horizontal axes and Z vertical axis, and rotates horizontally and vertically. Its sixth F-axis allows programming of laser's focal length to automatically adapt to range of ferrous and non-ferrous materials of different thickness. Operator no longer needs to make manual...

Read More »
Miter Saw Stand holds boards up to 16 ft long.
Saws

Miter Saw Stand holds boards up to 16 ft long.

DW723 miter saw stand weighs 35 lbs, has folding legs that lock in place for stability, and supports loads up to 400 lbs. Adjustable extension arms slide out horizontally from both ends of unit, providing platform for cutting. Stand comes with two flip stop/supports that aid in consistent, accurate cutting. Length (folded) is 5-1/2 ft, width (folded) is 10 1/4 in., and height is 7-1/2 in....

Read More »
Mold Dating Insert snaps in place.
Inserts

Mold Dating Insert snaps in place.

Indexable mold dating insert allows molders to make fast changes to day, month, year or work shift without completely removing insert from mold. Date changes can be made with turn of screwdriver, while snap-in-place indexable adjustment ensures insert remains fixed in correct date position during production. Mold dating inserts are available in diameters of 6, 8, 10, 12, 16 and 20mm. Inserts are...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics